Answer:
force=2,time=4.5
Explanation:
Thats the answer
1. What is the inductance of a series RL circuit in which R= 1.0 K ohm if the current increases to one-third of
its final value in 30 micro s?
Answer: the answer is C its in the book
Explanation:
1/25 force of gravity in distance
Answer: 25
Explanation:
I WILL CHOOSE YOU AS THE BRAINIEST PLEASE ANSWER MY QUESTION
Identify that all objects exert a force of gravity on all other objects in the universe
Answer:
It's like the Earth pulling on you and keeping you on the ground. That pull is gravity at work. Every object in the universe that has mass exerts a gravitational pull, or force, on every other mass. The size of the pull depends on the masses of the objects.
Explanation:
A golfer is teeing off on a 130.0 m long par 3 hole. The ball leaves with a velocity of 35.0 m/s at 35.0° to the horizontal. Assuming
that she hits the ball on a direct path to the hole, how far from the hole will the ball land (no bounces or rolls)?
Answer:
The ball will land 12.5m before that hole.
Explanation:
The motion of the golf ball can be considered as a projectile motion, where first its height is 0, then it keeps increasing to a maximum point, after which its height starts decreasing again and hits the ground (height becomes 0 again).
We need to calculate the Range (horizontal distance) of the ball which is given as:
[tex]R=\frac{v_i^2{\cdot}sin2\theta}{g}[/tex]
Where
v(i) = initial velocity = 35 m/s
θ = Initial angle = 35°
g = gravitational acceleration = 9.8 m/s
Substitute in the given formula to find Range:
[tex]R=\frac{(35)^2\cdot{sin}(2)(35)}{9.8}\\R=\frac{(1225)(0.94)}{9.8}\\R = 117.5~m[/tex]
Distance between the hole and position where ball lands = 130m - 117.5m = 12.5m
In order to increase the speed in a gear system
the driven gear must be larger than the driving gear
the driving gear must be larger than the driven gear
the driving gear must be the same size as the driven gear
none of these
asap plz
plz asap
Answer:
the driving gear must be larger than the driven gear
Explanation:
How does the value of the electrostatic force vary with the value (how many) of the charges?
Answer:
Electrostatic force is directly proportional to the amount of charge on each body under consideration.
Electrostatic force increases with increase in charge.
Electrostatic force decreases with decrease in charge.
Explanation:
Electrostatic force is the force between 2 charges which can be explained by the Coulomb's Law:
F= K (q₁)(q₂)/r²
Where
F= Electrostatic Force
K = Constant of Proportionality
(q₁) and (q₂) = Amount of charge on each body
r = Distance between two bodies carrying charge
If the value of (q₁) or (q₂) is increased considering the other factors remain constant, the value of F will also increase.
And vice versa.
A pot of water is boiled on a stove. Which of the following definitions of the system enables the most straightforward thermodynamic analysis of the process
A. The system is the pot and water.
B. The system is the stove, pot, and water.
C. The system is the building containing the stove.
D. The system is the entire Universe.
Answer:
A. The system is the pot and water.
Explanation:
Thermodynamics is an aspect in science which deals with the applications of heat energy. The useful applications of heat energy to perform work.
In the given question, the pot and water is the system which both absorbs heat energy from the stove. Thus, the system is a closed system since it shares heat energy with its surroundings.
The surrounding of the system extends from the boundary of the pot to the universe.
Electric circuit questions,,, plz help me
a car travels 60 km in 2 hours 84 km the next 1 hour and then 68 km in 8.9 hours before reaching its destination what was the cars average speed in km / h
Answer:
17.8 km/hr
Explanation:
Average speed = distance / time
The total distance traveled is 60 km + 84 km + 68 km = 212 km.
The total time is 2 hr + 1 hr + 8.9 hr = 11.9 hr.
The average speed is 212 km / 11.9 hr = 17.8 km/hr
which type of circuit is shown?
A. closed series circuit
B. closed parallel circuit
C. open parallel circuit
D. open series circuit
Answer:
I think it's D. open series circuit .
Explanation:
hope it helps you!
Write down the equation that links energy transferred, charge flow, and
potential difference.
Answer:
The description of the given scenario is described in the explanation segment below.
Explanation:
As a charge passes through some kind of potential gap, the electrical task is undertaken as well as energy will be transferred. The Potential difference seems to be an amount of work performed per unit charge and is denoted by "V" as well as a charge is denoted by "Q".The energy transferred could be determined by using the following equation or formula:
⇒ Energy transferred = charge × potential difference
The equation that links energy transferred, charge flow, and potential difference (voltage) is: [tex]E = qV[/tex]
In Science, when a potential difference (voltage) is applied on an object, it gains some potential energy, which is then converted to kinetic energy.
The kinetic energy possessed by the object is responsible for the movement of electrons from one point to another in an electric field.
Hence, the quantity of energy in an electric circuit is directly proportional to the charge and potential difference (voltage) applied on the object.
Mathematically, the energy transferred in an electric field is given by the formula:
[tex]E = qV[/tex]
Where:
E is the energy transferred.q is the charge.V is the potential difference.Read more: https://brainly.com/question/23153766
A ball rolls with a speed of 4.0 m/s across a level table that is 1.0 m above the floor. Upon reaching the edge of the table, it
follows a parabolic path to the floor. How many meters along the floor is the landing spot from the table?
Answer: 1.81m
Explanation:
Given the following:
Horizontal speed = 4m/s
Height of table = 1m
Taking the vertical component of the motion:
Using:
S = ut + 0.5 at^2
Where, S = height of table, a = acceleration due to gravity (9.8m/s^2), t = time and u = Initial Velocity in vertical direction = 0
1 = 0(t) + 0.5(9.8)t^2
1 = 4.9t^2
t^2 = 1 / 4.9
t^2 = 0.204081
t = sqrt(0.204081)
t = 0.452s
For Horizontal :
Gravitational acceleration is absent, therefore distance can be calculated using:
Distance = Velocity × time
Distance = 4m/s × 0.452s
Distance = 1.808 m
Distance = 1.81m
Heat always flows from a what place to a what place
Answer:
Heat is always the transfer of energy from an object at a higher temperature to an object at a lower temperature.
Explanation:
Answer:
Heat flows from high temperature to low temperature
Explanation:
the answer also may vary it can also be the heat flows from a warmer to colder place
hope this helped!
All engines operate at less than 100 percent efficiency because they
A. absorb heat
B. conduct heat
C. burn gasoline
D. emit heat
Answer:
It is B or D, but I may be leaning a little more towards D.
Explanation:
What is the mass of an object that has a weight of 80.0 N?
Explanation:
SUPONIENDO QUE LA ACELERACIÓN DE LA GRAVEDAD ES [tex]9.80 m/s^{2}[/tex]
USANDO LA SEGUNDA LEY DE NEWTON:
m = 80.0 N/[tex]9.80 m/s^{2}[/tex] = 8.16 kg
Answer:
8kg
Explanation:
using the formula Force(F)=mass(m)×acceleration(a),
since we are finding the mass of the object,we will make m the subject by dividing both sides by a.
you will now get m= f/a
the acceleration on Earth is usually 10m/s
m= 80/10
m= 8/1 which is also 8kg
Isabela is an astronomer studying stars A and B. Star A is farther away from Isabela and yet when Isabela observes the stars, the stars appear to have the same brightness. Which would be the best explanation for this? The stars have the same luminosity. Star A is more luminous than star B. Star B is more luminous than star A.
Answer: star A is more luminous
Explanation:
Answer:
B. Star A is more luminous than star B.
Explanation:
on edg
If the billing cycle length for a credit card is one calendar month, which of the
following months will result in the greatest periodic interest rate?
O A. December
B. June
C. April
!!!2O D. September
Answer: A.) December
Explanation:
December has the highest number of days in the options given above, with 31 days compared to the others with 30 days within a calendar month. The billing cycle is used to refer to a time interval between the end and the next billing or statement date. In the scenario above, the billing cycle length is monthly, meaning the periodic interest will be paid over a 31 day span time before thre beginning of another cycle.
For example, if periodic interest is $1 per day, this amount totals ($1 × 31) in december compared to the ($1 × 30) Interest in the June, April and September billing cycle.
1. A force that pushes forward on an object speeds the object up. A force that pushes backwards slows
the object down. What effect does a force that is perpendicular to the object's motion do?
Answer:
If pushing forward speeds it and pushing backward slows it down then force perpendicular to the object will keep it stationary and resist it's motion
Explanation:
Hope my efforts make impact in your life
Which statement best explains acceleration?
O A.
It is the total distance covered over a period of time.
B.
It is a change in velocity over a period of time.
Oc.
It is a change in displacement over a period of time.
OD.
It is a change in direction over a period of time.
Answer:
It is a change in velocity over a period of time.
Explanation:
It is measured in metres/second2 using an accelerometer.Two students walk out on the broken bridge together. As they reach the end of the bridge, what would happen to their gravitational potential energy.
A)Decrease
B)increase
C)Remain the same
D)None of the above
Answer: C
Explanation: I dont realy know what this means. but it will not increase because your not getting closer to earths center of gravity and not decreasing because your not high enough in the atmosphere.
8. How does the direction of friction compare to an object's direction of motion?
Answer: The direction of the force of friction is such that it opposes the direction of motion that an object would move if there were no frictional force acting on the object.
The direction of motion and direction of friction have to be in opposite directions for a object to be in motion.
What is motion?Motion is defined as a phenomenon which is described with respect to change in object's position with respect to time.It is given in terms of displacement,velocity,distance ,acceleration,speed.
Branch of physics which deals with motion of objects without any reference to it's cause is called kinematics while the branch which studies forces and their effects on motion is called as dynamics.
Motion applies to various systems like objects,bodies, matter particles ,radiation ,curvature.There are three laws of motion which are proposed by Newton.Classical mechanics is based on Newton's law of motion.Relativistic mechanics is based on modern kinematics.
Learn more about motion,here:
https://brainly.com/question/5961485
#SPJ2
For a reaction to occur what must happen to the energy in order to break the chemical bond
When transferring electric charge, an object becomes negative when it
a) loses protons
b) gains electrons
OC) loses electrons
d) gains protons
e)
a and d are correct
Answer:
b) gains electrons
Explanation:
When transferring electric charge, an object becomes negative when it gains electrons
The throwback PFD is which type?
Answer:a
Explanation:
The throwback PFD is a Type III PFD. This type of PFD is designed for calm, inland water, or where there is a good chance of quick rescue. THe correct option is C.
Type III PFDs will not turn unconscious wearers to a face-up position, so the wearer may have to tilt their head back to avoid turning face down.
Type III PFDs have the same minimum buoyancy as Type II PFD. Float coats, fishing vests, and vests designed for various water sports are examples of Type III PFDs. Some Type III PFDs are designed to be inflated upon entering the water.
Offshore life jackets of Type I are suited for all areas, notably open, choppy, or isolated regions where rescue may be delayed and offer the highest buoyancy. Near-shore vests of Type II PFDs are designed for calm inland water or situations where there is a good probability of prompt rescue. Throwable PFDs of Type IV are suitable for usage in open water as well as calm, heavily used inland waters where assistance is always available. Special-purpose PFDs known as Type Vs are made for activities like kayaking and whitewater rafting.
The throwback PFD is not a Type I PFD because it does not provide the most buoyancy and is not designed for all waters. It is not a Type II PFD because it is not intended for calm, inland water or where there is a good chance of quick rescue. It is not a Type IV PFD because it is not intended for calm, inland water with heavy boat traffic, where help is always present. It is not a Type V PFD because it is not designed for specific activities such as kayaking or whitewater rafting.
Therefore, the correct option is C. type III.
To learn more about PFDS click:
https://brainly.com/question/30098150
#SPJ6
A negative slope on the velocity vs. time graph indicates that the object is not
accelerating
A. True
B. False
Answer: False, I think
Explanation:
Well it depends. Its hard to say without a function of the graph. Given a velocity graph, the first derivative is the acceleration.
Negative slope on a velocity graph means you are going in the negative direction. And over time, your velocity per unit of time is also decreasing. That means we are accelerating in the negative direction
On which of the following objects, all sitting on the ground together, does
Earth exert a greater gravitational pull than a pencil? Check all that apply.
A. A basketball
B. A toothpick
C. A truck
D. A piece of paper
E. Your hand
Explanation:
a toothpick
How does the velocity change with time in uniform rectilinear motion of an object?
ANSWER QUICK 40 POINTSSSS
QUESTION 6
Why are the moon’s craters preserved?
A)The moon is windy.
B)There are tectonic plates shifting on the moon.
C)Water preserves them.
D)There are no longer live tectonics occurring on the moon.
QUESTION 7
Why do you see only one side of the moon from Earth?
A)The moon does not rotate.
B)The moon takes longer to rotate than to revolve around Earth.
C)The moon takes less time to rotate than to revolve around Earth.
D)The moon’s period of rotation and revolution are equal.
QUESTION 8
What is the best description of the side of the moon that faces Earth?
A)random
B)The same
C)goes through cycles
D)changes
QUESTION 9
In what position are the moon, the earth, and the sun during the first quarter moon?
A)The moon is between the sun and the earth.
B)Earth is between the sun and the moon.
C)The sun is between the earth and the moon.
D)The moon is to the side of the earth and the sun.
Answer:
For 6 its D
For 7 its A
For 8 its C
For 9 I think its B but Im not sure
Calculate the wavelength of an electron mass 9.1*10^-31kg moving with a velocity of 2.0*10^6m/s (h=6.63*10^-34Js) (Hint: De Broglie's wavelength)
Answer:
Wavelength, [tex]\lambda=3.64\times 10^{-10}\ m[/tex]
Explanation:
We have,
Velocity an electron is [tex]2\times 10^6\ m/s[/tex]
Mass of an electron is [tex]9.1\times 10^{-31}\ kg[/tex]
It is required to find the wavelength of electron. The De-Broglie wavelength of an electron is given by :
[tex]\lambda=\dfrac{h}{mv}[/tex]
h is Planck's constant
[tex]\lambda=\dfrac{6.63\times 10^{-34}}{9.1\times 10^{-31}\times 2\times 10^6}\\\\\lambda=3.64\times 10^{-10}\ m[/tex]
So, the wavelength of an electron is [tex]3.64\times 10^{-10}\ m[/tex].
I WILL CHOOSE YOU AS BRAINLIEST
Use scientific evidence to outline how the Big bang theory can be used to explain the origin of the universe and its age.
Answer:
The widely accepted theory for the origin and evolution of the universe is the Big Bang model, which states that the universe began as an incredibly hot, dense point roughly 13.7 billion years ago.