Answers
Related Questions
Charge q is 1 unit of distance away from the source charge S. Charge p is two times further away. The force exerted
between S and q ls the force exerted between S and p.
Answers
Answer:
The correct answer will be "1/16".
Explanation:
The force or distance between two substances in charge seems to be inversely proportional to the square of the size of the particles.
The exerted force between "S" and "q" will be:
⇒ [tex]Fsq=\frac{{Q}'}{Q} 1^2[/tex] ...(equation 1)
The exerted force between "S" and "p" will be:
⇒ [tex]Fsp=\frac{{Q}'}{Q} 4^2[/tex] ...(equation 2)
Now,
On the comparison of "equation 1" and "equation 2", we get
⇒ [tex]\frac{1}{16}[/tex]
The direction of a vector that points somewhere between due north and due
east is measured in
A. centimeters
B. degrees
C. hours
D. miles
Answers
Answer: B
Degree
Explanation:
The direction of vectors are always measured in angles starting from the north. That is, in an anticlockwise direction. But the unit of angle is degree. Therefore, the direction of a vector that points somewhere between due north and due east is measured in degree.
Answer:degrees
Explanation:
1. Suppose you had come along before Mendeleev and were tasked with
organizing the elements into a pattern others could understand. Describe your
arrangement and how you would determine where elements would be placed.
Can you think of any problems your design might create?
2. The first periodic table was organized according to atomic mass, but the
current periodic table is arranged according to atomic number. What is the
difference between atomic mass and atomic number, and why is the atomic
number now the basis for the periodic table?
3. How would the periodic table look differently if it was arranged according to
atomic mass? Focus on Periods 1-4 to complete your answer.
Answers
Answer:
1. There would be two different tables, one arranged by mass and the second arranged by the chemical reactions the elements are known for
2. a. The difference is that the atomic mass is fixed and is 2 or more times the atomic number which is variable
b. The atomic number is the bases of the periodic table because it reflects the unique identity as well as the chemical and physical properties of the atoms more than the atomic number
3. The table formed by the atomic mass is not representative of the chemical properties of the elements
Explanation:
1. The elements would have been arranged by mass and by order of reaction such that there would be two tables where the first table will list all the known elements arranged by mass and the second table will group the elements in the order in which they can react or the kinds of compounds they can form such as oxides, nitrides etc
2. a. The atomic number, Z, is determined by the definitive number of protons contained in the nucleus of an atom and it is used for the classification of an atom as a particular element based on the its equivalent atomic number
The atomic number defines the chemical behavior of an an element because it is equal to the number of electrons present in a neutral atom
The atomic mass or mass number, A, is the total of the mass of the protons and the neutrons present in an atom
The neutron is electrically neutral, allowing its quantity to vary without significantly impacting on the chemical behavior of the atom, hence two different elements can have the same number of neutrons
Therefore, the difference is that the atomic mass is fixed and is 2 or more times the atomic number which is variable
b. The atomic number is the bases of the periodic table because it reflects the unique identity as well as the chemical and physical properties of the atoms more than the atomic number
3. If the periodic table was arranged according to the atomic mass, we would have;
Groups
H
He Li B C O F Na
Be N Ne Mg S Ar Sc
O Si Ca Ti Zn Se
It is seen that the above table is not representative of the chemical properties of the elements.
Question 5(Multiple Choice Worth 4 points) (01.04 MC) Which of the following correctly describes the relationship between speed and velocity? Speed is the change in velocity over time; velocity is distance plus direction. Speed is the change in distance over time; velocity is speed plus direction. Speed is distance plus direction; velocity is speed plus time. Speed is the change in acceleration; velocity is distance over time.
Answers
Answer:
Speed is the change in distance over time; velocity is speed plus directionExplanation:
Speed is defined as the change in distance covered by a body with respect to time while velocity the change in displacement of a body with respect to time. Speed is a scalar quantity since it does not specifies direction while velocity is a vector quantity because it specifies both magnitude and direction.
Speed can only be equal to the velocity if it also specifies direction.
Based on the definition above, it can be concluded that speed is the change in distance over time and velocity is speed plus direction.
Answer:
Speed is the change in distance over time; velocity is speed plus direction.
Explanation:
I did it and got the test right
Light ray A moves from air to water. Part of ray A is reflected at the air-water boundary. Which arrow in the image is the reflected ray?
E
OA. B
OB.
С
OC.
D
OD. E
Answers
Answer:
A. B
Explanation:
The image has been attached.
Reflected ray refers to the ray of light which is reflected back after striking a surface that is non-permeable.
The ray of light which is reflected before the ray touches the surface is said to the incident ray.
According to the given image, ray B is the reflected ray. Ray B is reflected in the air after the ray A strikes at the surface of the water.
B
Explanation:
Since mirrors reflect things, when you shine light at a mirror, it will bounce off of the mirror, or reflect, and shine the opposite direction of where the original light is pointed. The answer would be B because light doesn't go through the mirror, or run along it.
Think of when you through a basketball on the ground. If you bounce it at an angle, it won't just come back to you in the same angle. It will keep bouncing at the same angle you through it. This is pretty much what describes the relationship between ray A and ray B.
HOPE THIS HELPS!!!!!
What caused the mistake that led to the destruction of the Mar's rover?
Answers
Answer:
Metric Math Mistake Muffed Mars Meteorology Mission. 1999: A disaster investigation board reports that NASA's Mars Climate Orbiter burned up in the Martian atmosphere because engineers failed to convert units from English to metric
Explanation:
hope this helps =)
HIME REMAIN
58:15
If business owners want to increase demand for their goods and services, what is the best action for them to take?
increase their models
increase their projections
decrease their prices
decrease their quantities
Answers
Answer:
decrease their prices
Explanation:
If we see demand curve then we can observe that demand for good decreases when price increases and demand for good increases when price decreases.
We also know intuitively that customer are price sensitive. That is their buying behavior changes with price of goods, Consumers prefer lower priced good.
So, if business owners want to increase demand for their goods and services
they should decrease their prices.
A helicopter travels west at 80 mph. It is moving above a car traveling on a highway at 80 mph. Given this information, you can determine that the helicopter and car are traveling ____.
Select one:
a. in the same direction
b. in different directions
c. at the same speed
d. at the same velocity
Answers
Answer:
d. at the same velocity
Explanation:
I will assume the car is also travelling westward because it was stated that the helicopter was moving above the car. In that case, it depends where the observer is. If the observer is in the car, the helicopter would look like it is standing still ( because both objects have the same velocity). If the observer is on the side of the road, both objects would be travelling at the same velocity. Also recall that, velocity is a vector quantity; it is direction-aware. Velocity is the rate at which the position changes but speed is the rate at which object covers distance and it is not direction wise. Hence velocity is the best option.
Answer:
C. At the same speed
Explanation:
I just took the exam and got the answer correct
Describe the relationship between frequency and wavelength
Answers
Answer:
Frequency and wavelength are inversely related.
Explanation:
Frequency and wavelength have an inverse relationship because if one thing goes up another goes down. For example, if frequency goes up, the wavelength goes down and vice versa.
Answer:
The relationship between wavelength and frequency is that the frequency of a wave multiplied by its wavelength gives the speed of the wave.
Explanation:
Frequency and wavelength are related terms also, used to describe electromagnetic radiation or light. One simple equation is used to convert between them: frequency x wavelength = speed of light. λ v = c, when λ is wavelength, v is frequency, and c is the speed of light.
I know I'm really late but I hope this helps lol
A model of an atom is useful when it
Select one:
O a. is shown only as the planetary model
b. shows exactly what an atom looks like
c. helps to visualize processes that cannot be seen with our eyes
d. magnifies what the eye can't see
Answers
What is a good analogy for potential energy in a circuit?
Answers
Answer: find the answer in the explanation
Explanation: The potential energy in a circuit between two points is the workdone in taking units positive charge from one point to the other in the circuit. Its S.I unit is Joule.
Because voltage of a battery or cell in a circuit is the potential energy difference across its terminal
The potential energy difference between two points is one volt, if the workdone in taking one Coulomb of positive charge from one point to the other is one Joule.
How does the electric force between two charged objects change when the
distance between the objects increases?
Answers
Answer:
When the electric force between two charged objects change, the distance between the objects increases in Iicreasing the separation distance between objects and decreases the force of attraction or repulsion between objects.
Hope it helps.
The temp of equal masses of three different liquids A,BandC are 12°C,19°Cand 28°Crespectively . The temp when A and B are mixed is 16°C, and when Band C are mixed is 23°C.The temp when A and C are mixed is
Answers
Answer:
19.1°C
Explanation:
If A and B mix to give 16°C, A has risen by 4°C and B has fallen by 3°C;
If B and C mix to give 23°C, B has risen by 3°C and C has fallen by 5°C;
This means the energy transfered to cause a change of 3°C in B causes a change of 4°C in A and 5°C in C;
We can use this as a ratio (4:5);
The temperature difference between A and C is 16°C;
we add the two parts of the ratio (4+5) to get 9 and divide the temperature difference to get 16/9;
Next we multiply this by one of the parts of the ratio, so with 4, you get 64/9;
This number is the proportional temperature change in A upon mixing;
We then add this to the original temperature of A to get the resultant temperature of the mix like so:
64/9 + 12 = 19.1111...
You can do this alternatively using the other part of the ratio;
We would multiply the 16/9 by the 5 instead of the 4 to get 80/9;
This number is the proportional change in temperature in C upon mixing
Then subtract this from this from the original temperature of C and you should get the same answer:
28 - 80/9 = 19.1111...
What is general relativity
Answers
If earth had two moons, how might this affect the way we see eclipses here on earth?
Answers
What is the proper function of a linkage? *
1 point
a) transferring energy
b) transferring speed
c) transferring money
d) transferring weight
asap plz, for science loverz
brainliest for the best answer!
Answers
Answer:
a) transferring energy
Explanation:
A linkage is an assembly of parts connected together to control forces and movement. The connections between links are called joints and are used for ensuring movement, pure rotation or sliding.
Linkages provides a means in which kinetic energy is being transferred in different directions within a system. This Linkages can be used to Change force direction, size of force applied or the motion created by the force.
2) Light reflects off of surfaces. It is also absorbed by opaque materials
and transmitted through transparent objects. Consider this diagram of
tvo sheets of construction paper. Elaborate on the behavior of the
incident light waves
A)
White paper reflects the incoming waves, while black
absorbs the incoming waves.
White paper reflects some of the incoming waves,
while black absorbs all of the incoming waves.
B)
Q
The white paper absorbs and transmits light waves,
while the black paper absorbs all light waves.
Some of the light waves incident on the white paper
D) are reflected and some are absorbed. None of the
Light waves are reflected from the black paper.
Answers
Answer: B
White paper reflects some of the incoming waves,
while black absorbs all of the incoming waves.
Explanation:
Light is reflected off of white surfaces. Light is absorbed by opaque materials and transmitted through transparent objects.
In the case of a white paper, a white paper can be considered as a translucent material in which some of the light incident on it bounces off while some pass through it. Therefore, we can conclude that White paper reflects some of the incoming waves,
while black absorbs all of the incoming waves.
Liquefication occurs when
Answers
Answer: Liquefaction occurs when the structure of a loose, saturated sand breaks down due to some rapidly applied loading.
As the structure breaks down, the loosely-packed individual soil particles attempt to move into a denser configuration. Liquefaction most often occurs when three conditions are met:
loose, granular sediment or fill
saturation by groundwater
strong shaking
Answer:
heat is applied
Explanation:with metal and ice
Do you think a population besides the moon jellies’ consumer population (sea turtles) and resource population (zooplankton) could have caused the moon jelly population to increase in size?
Answers
Answer:
I didn't quite understand your question, but the moon jelly population will increase if there are either more zooplankton or less sea turtles.
More zooplankton means more food => higher population
Less sea turtles means that the moon jelly will be lest often consumed => higher population
Answer: Yes because the Orca will start to eat the moon jellies
Explanation: When the Sea Turtles start to get very low on population the Moon jellies are next in line also the sea turtles eat the moon jellies and since they eat the moon jellies the sea turtle has a bit of that taste in them so they will taste alike to the sea turtles.
Force = 7kN
Pressure = 1mPa
Area = ?
Answers
Answer:
7 m^2
Explanation:
P=F/A
1=7/A
1A=7
A=7
Area is 7 meters squared
what type of circuit is shown?
open parallel circuit
closed parallel circuit
closed series circuit
open series circuit
Answers
Answer:
open series circuit, (c)
Explanation:
static electricty is the study of..
A buildup of charge
B electric discharges
C electric fields
D all of the above
Answers
Answer:
all of the above
Explanation:
i study this kind of stuff in school
what type of circuit is shown?
A. open parallel circuit
B. open series circuit
C. closed parallel circuit
D. closed series circuit
Answers
Answer:
A. open parallel circuit im pretty sure
Explanation:
Answer:
D
Explanation:
The bulbs are on the same wire as the battery, so its series. Current is flowing so its closed.
What is the photoelectric effect?
A the absorption of particles by a metal surface that is exposed to red light or infrared rays
B the proportional relationship between a photon's energy and the frequency of light.
C the emission of electrons from a metal caused by light striking the metal
D the ability of specialized photons to bounce off a metal surface.
Answers
Answer: C
the emission of electrons from a metal caused by light striking the metal
Explanation:
Photo means anything related to light in Physics and science generally.
Photoelectric effect explains the effect of light incident on metal surfaces by knocking out electrons on the metal surfaces.
The correct option is C
the emission of electrons from a metal caused by light striking the metal
A piston has an area of 4 m2 and needs 20 N of force to push it down. What is the pressure?P=F/A *
A) 5 Pa
B) 0.2 Pa
C) 80 Pa
D) 20 Pa
brainliest for the best answer!
for besties with scienceeee!! asap plzz
Answers
Someone please help me with this
1. A guitar string vibrates with a frequency of 100 Hz and it has a wavelength of 3 cm. Determine the speed of the wave that goes through that guitar string.
2. The speed of sound waves in air is around 340 m/s. Suppose that you hear a dog growl, and the frequency of the growl is 70 Hz. Determine the wavelength of the growl sound waves.
3. You are in a boat on the ocean. Some waves come by and you feel your boat move up and down. You whip out a stopwatch and find that you go up-and-down once every 5 seconds. So, the period of the wave is 5 s. You are watching the waves as you go up-and-down, and you see that the wave crests are 15 meters apart. So, the wavelength is 15 m. Use this information to calculate the speed of the waves.
4. Explain why these two waves have the same speed, even though some of their wave properties are different.
Wave A has a frequency of 3 Hz and a wavelength of 5 m
Wave B has a frequency of 6 Hz and a wavelength of 2.5 m
Answers
Answer: I think 1 is 300 metres per second.
Explanation: wave speed= wave length x wave frequency
wave speed = 3 x 100
wave speed is 300 m/s
A plane increases its speed from 450 km/hr to 750 km/hr in 0.30 hour. What is its acceleration?
Answers
Answer:
The acceleration is found as:
a = 1000 km/h²
Explanation:
Initial speed of the plane = 450 km/h
Final speed of the plane = 750 km/h
Time taken = 0.3 h
Acceleration can be defined as the change of speed of the object divided by the time taken to bring that change
Acceleration is given as:
[tex]a=\frac{v_f-v_i}{t}[/tex]
where v(f) = 750 km/h , v(i) = 450 km/h , t = 0.3 h
Substitute the values in the equation of acceleration
[tex]a= \frac{750-450}{0.3}\\a=\frac{300}{0.3}\\a=1000 km/h^2[/tex]
This is the found result
Please help and show workings.
Answers
Effective resistance = 2+1.5 = 3.5 ohms
Current in the circuit = 1.2 A
Lost volts in the battery = 1.8V
Current in one of the 3 ohms resistors = 0.6 A
I hope it helps
What happens to sound waves after they are received by our ears?
Answers
Answer:
Our ears perceive then sound then it is transmitted to our brain where it is processed into something we can respond to. This all happens in less than a second and we are unaware that we are doing it.
Explanation:
The sound wave bounces off of the ear drum into the inner ear.
Answer:
Sound waves travel from the outer ear and in through the auditory canal, causing the eardrum to vibrate. This in turn causes three small bones in the middle ear to move. The vibrations move through the fluid in the cochlea in the inner ear, stimulating thousands of tiny hair cells.
I'M ON A TIMER Ingrid says that a red ball of clay appears red because the clay reflects red wavelengths. Simon says that the clay appears red because it allows red wavelengths to pass through it. Which statement best explains who is correct? Ingrid is correct. The clay appears red because it is opaque. Ingrid is correct. The clay appears red because it is a type of matter. Simon is correct. The clay appears red because it is opaque. Simon is correct. The clay appears red because it is a type of matter.
Answers
Answer:
Ingrid is correct. The clay appears red because it is a type of matter.
Explanation:
Explanation: It is A because it only shows red because it only reflects red. If it let any other color pass through it then it could reflect any color.