Answer:
standard heat of formation for compound
Explanation:
Choose the correct coefficients to balance the following equation: __CaCO3 + __HC; Produces __CaCl2 + __CO2 + __H2O
Answer:
CaCO3 + 2HCl = CaCl2 + CO2 + H2O
Explanation:
CaCO3 + HCl = CaCl2 + CO2 + H2O
Error in equation should be HCl on left hand side not HC
Left Side
Ca = 1
C = 1
O = 3
H = 1
Cl = 1
Right Side
Ca = 1
C = 1
O = 3
H = 2
Cl = 2
So we'll try and balance the Chlorine
CaCO3 + 2HCl = CaCl2 + CO2 + H2O
Left Side
Ca = 1
C = 1
O = 3
H = 2
Cl = 2
Right Side
Ca = 1
C = 1
O = 3
H = 2
Cl = 2
Yay it worked
these are easily extracted with a pH solution of greater than 7? which one
A) acid drugs
B) metabolites
C) base drugs
D) derivatives
Answer:
base drugs
Explanation:
The pH scale is a scale graduated from 0-14. It is used as an indicator of the degree of acidity or alkalinity. A pH of 0-6.9 indicates acidity. A pH of 7 indicates that the solution is neutral. A solution of pH above 7 indicates that the substance is basic.
It is thus a correct statement to say that any substance that dissolves in solution to produce a solution of pH greater than 7.0 is a basic substance.
If we look at the options closely, it is only a basic drug that will dissolve in water to yield a basic solution of pH greater than 7.0 hence the answer.
A substance that is made up of more than one atom is called _____.
Answer:
It is called a compound.
Explanation:
Why does common table salt (NaCl) have a high melting point?
A.
It forms an ionic bond with a crystal lattice structure.
B.
It forms a covalent bond with a Lewis dot structure.
C.
It forms a metallic bond with an electron sea model structure.
D.
It forms a covalent bond by sharing electrons.
E.
It forms a metallic bond with a Lewis dot structure.
Answer:C is not the answer. I just got it wrong in Edmentum
Explanation:
A beaker contains 41.3 mL of pentane ( C5H12 , density is 0.626 g/mL). Determine how many C atoms this liquid contains.
Answer:
41.3 mL OF PENTANE CONTAINS 62.608 *10^-27 CARBON ATOMS.
Explanation:
Volume of Pentane = 41.3 mL
Density = 0.626 g/mL
Since density is defined as mass per unit volume. Calculate the mass:
Density = mass / volume
Mass = density * volume
Mass = 0.626 g/mL * 41.3 mL
Mass = 0.015 g of pentane
Molar mass of pentane C5H12 = ( 12* 5 + 1*12) = 60 + 12 = 72 g/mol
Number of moles = mass / molar mass
Number of moles = 0.015 g / 72 g/mol
Number of moles = 2.08 * 10^-4 moles.
Since 1 mole of pentane contains 5 moles of carbon, we can then calculate how many moles of csrbon 2.08*10^-4 moles will contain
1 mole of pentane = 5 moles of carbon
2.08 *10^-4 moles = x moles
x mole = 5 * 2.08*10^-4
x mole = 10.4 *10^-4 moles of carbon
In other words, 10.4*10^-4 moles of carbon is present in 41.3 mL of pentane
We can then calculate the number of carbon atoms present in the liquid using:
From 1 mole containing 6.02 *10^-23 atoms, 10.4 *10^-4 moles of pentane will contain:
1 mole = 6.02*10^-23 atoms
10.4 *10^-4 moles = (6.02*10^-23 * 10.4 *10^-4) atoms of pentane
= 62.608 *10 ^-27 atoms of pentane.
So therefore, 41.3 mL of pentane will contain 62.608 * 10 ^-27 carbon atoms
The number of C atoms in 41.3 mL of pentane (C₅H₁₂) of density 0.626 g/mL is 2.16x10²³.
To find the number of C atoms in pentane, we need to find the number of moles.
We can calculate the mass from the density:
[tex] d = \frac{m}{V} [/tex]
Where:
d: is the density = 0.626 g/mL
V: is the volume = 41.3 mL
The mass is:
[tex] m = d*V = 0.626 g/mL*41.3 mL = 25.85 g [/tex]
Now, with the molecular weight of the pentane, we can calculate the number of moles:
[tex] \eta = \frac{m}{M} = \frac{25.85 g}{72.15 g/mol} = 0.358 \:moles [/tex]
The number of C atoms can be found with Avogadro's number:
[tex] n_{C} = \frac{6.022\cdot 10^{23} \:atoms}{1\:mol}*0.358 \:moles = 2.16 \cdot 10^{23} \:atoms [/tex]
Therefore, the liquid contains 2.16x10²³ C atoms.
Learn more here:
https://brainly.com/question/20091306?referrer=searchResults
I hope it helps you!
Which statement describes a periodic trend of first ionization energy?
O A. It tends to decrease from left to right across a period.
B. It remains the same within a period.
O C. It tends to increase from top to bottom of a group.
D. It tends to decrease from top to bottom of a group.
Answer:
D
Explanation:
when ionic radius gets bigger, the valence electron is repelled further away from the nucleus due to higher number of principal quantum shells. it experiences less electrostatic forces of attraction with the nucleus and requires less energy to remove.
If they are traveling at the same speed, which will have the most kinetic energy?
A. A 5-kilogram ball
B. A 25-kilogram ball
C. A 10-kilogram ball
D. A 1-kilogram ball
Answer: B. (A 25 kg ball)
Explanation:
Since [tex]KE = \frac{1}{2} mv^{2} \\[/tex], and velocity is the same for all four balls, the ball with the greatest mass will have the greatest kinetic energy (since mass and KE are directly related). Below shows these calculations:
A. m = 5
[tex]KE = \frac{1}{2} mv^{2} \\[/tex]
[tex]KE = \frac{1}{2} (5)v^{2} \\[/tex]
[tex]KE = 2.5v^{2} \\[/tex]
B. m = 25
[tex]KE = \frac{1}{2} mv^{2} \\[/tex]
[tex]KE = \frac{1}{2} (25)v^{2} \\[/tex]
[tex]KE = 12.5v^{2} \\[/tex]
C. m = 10
[tex]KE = \frac{1}{2} mv^{2} \\[/tex]
[tex]KE = \frac{1}{2} (10)v^{2} \\[/tex]
[tex]KE = 5v^{2} \\[/tex]
D. m = 1
[tex]KE = \frac{1}{2} mv^{2} \\[/tex]
[tex]KE = \frac{1}{2} (1)v^{2} \\[/tex]
[tex]KE = 0.5v^{2} \\[/tex]
The use of nuclear energy can have both positive and negative consequences. Which of the following is a positive consequence of using nuclear energy? a. Nuclear energy uses nonrenewable resources. b. Nuclear energy produces little air pollution. c. Uranium ore used for nuclear power plants must be mined and processed. d. Nuclear energy has no environmental impact. Please select the best answer from the choices provided A B C D
Answer
its B
Explanation:
B.
Nuclear energy produces little air pollution.
Oxygen is an example of a(n)
A. heterogeneous mixture
B. compound
C. element
O
OD. homogenous mixture
Reset Selection
Answer:
C. element. oxygen is an element
Explanation:
oxygen is element #8
What is pressure?
O A. The heat required to change the temperature of a gas
OB. The force of gas molecules hitting their container
O C. The mixing of gas molecules due to random motion
D. The space occupied by gas molecules moving around
Answer:
B.
Explanation:
The force of gas molecules hitting their container is pressure.
Because pressure = force/area.
Compounds formed from only non-metals consist of particles called
Answer:
Compounds formed from non-metals consist of molecules.
Explanation:
The atoms in a molecule are joined together by covalent bonds. These bonds form when atoms share pairs of electrons.
I hope I helped, please correct me if I'm wrong!
Considering the definition of covalent bond and molecules, compounds formed from only non-metals consist of particles called molecules.
But you have to know that the covalent bond is the chemical bond between atoms where electrons are shared, forming a molecule.
Covalent bonds are established between non-metallic elements, such as hydrogen H, oxygen O and chlorine Cl. These elements have many electrons in their outermost level (valence electrons) and have a tendency to gain electrons to acquire the stability of the electronic structure of noble gas.
The shared electron pair is common to the two atoms and holds them together.
In other words, a covalent bond is a type of chemical bond where two atoms of non-metallic elements join to form a molecule, where the atoms share pairs of electrons from their most superficial layer or valence layer to achieve stability in the molecule and thus complying with the octet rule.
In summary, compounds formed from only non-metals consist of particles called molecules.
Learn more:
https://brainly.com/question/12661797?referrer=searchResultshttps://brainly.com/question/4461443?referrer=searchResultshttps://brainly.com/question/11693996?referrer=searchResultsWhich of these is an example of interactions between the atmosphere and hydrosphere? (3 points) formation of snow cracking of rocks due to heat destruction of houses by wind uprooting of trees during tornadoes
Answer:
A. formation of snow
Explanation:
The formation of snow is an example of interactions between the atmosphere and hydrosphere.
As snow formation takes place when water vapor converted into liquid through condensation in the clouds. As water droplets rises high in clouds, cooler air present in atmosphere allow to lower the temperature and water droplets form ice or snow.
Hence, the correct option is A.
Answer:
A:formation of snow
Explanation:
What does the law of conservation of matter show?
A. That the total number of atoms in matter will never change.
B. That matter can never change form.
C. That atoms will combine in the simplest possible arrangement.
D. That atoms in matter can never be rearranged.
Answer: A) That the total number of atoms in matter will never change.
Explanation: Matter cannot be destroyed nor created. Matter is made up of atoms. The amount of atoms in an object will never change, even when changed into a different form.
Ex. When ice cubes melt there is still the same amount of water just in a different form.
Answer:
A
Explanation:
10 Points
Atoms are very small. Approximately how many atoms would it take to
make a stack as thick as a potato chip?
O
A. Thousands
O
B. Hundreds
C. Billions
OD. Millions
Reset Selection
Answer:
C. Billions
Explanation:
or even more
How many moles are in 255 mL of a 2.35 M solution of H2SO4?
Answer:
.59925 moles
Explanation:
In the reaction:
CO3²- + H+ --> HCO³-
The CO3²- ion is considered a base because it
1) accepts a proton
2) accepts an electron
3) donates a proton
4) donates an electron
Thanks! :)
Answer:
1) accepts a proton
Explanation:
CO₃⁻² is a base here because it is accepting a proton ( H⁺) through coordinate bonding by donating a pair of electron .
So option (1) is correct .
What is the value of log 43? Use the calculator. Round your answer to the nearest tenth.
Answer:
1.6
Explanation:
log 43 = 1.6335
B, 1.6
Explanation: E21
I know the correct answer is either a or d. Can anyone explain which one it is and why? CH3C ≡ CCH2CH2Cl is named: a. 1-chloro-3-pentyne b. 5-chloro-2-pentene c. 1-acetylenyl-3-chloropropane d. 5-chloro-2-pentyne
Answer:
D.
Explanation:
CH₃C≡ CCH₂CH₂Cl
Since there are 5 carbons so the suffix used is "pent"
There is a triple bond so its alkyne
So the compound becomes 2-pentyne (2 because the triple bond is with the 2nd carbon)
Then,
The functional group of chlorine is attached with 5th carbon So the compound becomes
5-chloro,2-pentyne
l Active transport
IL Simple diffusion
lll Facilitated diffusion
IV. Osmosis
Which of the above type of transport moves molecules against a concentration gradient?
Your answer:
ll and lV only
l only
ll only
Answer:
l only
Explanation:
The movement of substances in living cells can either require energy (active) or not (passive) depending on the direction of movement across concentration gradient. Naturally, substances tend to move down a concentration gradient i.e. difference in concentration, which is from a region of high concentration of water to a region of low concentration. This is the passive type of transport, which does not require energy input. Examples are osmosis, simple diffusion and facilitated diffusion.
However, another type of transport exists in which substances move against the concentration gradient i.e. from a less concentrated region to a more concentrated region. In this case, energy input in form of ATP is required for this kind of transport to occur. This transport is referred to as ACTIVE TRANSPORT. Hence, the answer is I only.
Which type of crystal is typified by a sea of delocalized electrons
surrounding the lattice?
O A. lonic
B. Metallic
OC. Macromolecular
D. Chemical
Reset Selection
B.metallic is the answer hope this helped
The correct answer is option B. Metallic.
What explains the structure of metals and delocalized electrons?
Metal is composed of a huge structure of atoms arranged in a regular pattern. Electrons from the outer shell of a metal atom are delocalized and can move freely throughout the structure. This sharing of delocalized electrons results in strong metal bonds.
Metallic bonds are electrostatic attraction between metal cations and the negatively charged ocean of delocalized electrons. The sea of delocalized electrons contains only valence electrons, not core electrons.
Learn more about Metal here: https://brainly.com/question/4701542
#SPJ2
The chemical formula of a compound describes the elements the compound contains and the
A.pH of the compound.
B.conduction of the compound.
C.ratio of elements in the compound.
D.ratio of neutrons to protons in each element.
Answer:
C.ratio of elements in the compound.
Explanation:
A compound is a substance that constitutes two or more elements in a defined proportion. A chemical compound is different from another compound in what it contains i.e. elements. A chemical formula shows the elements contained in a specific compound. For example, the chemical formula of sodium chloride (NaCl) shows us that it contains Sodium (Na) and Chlorine (Cl) elements as represented by symbols.
In addition to this, a chemical formula also shows the ratio of each element that makes up the compound. An element can have more than one atom in a compound. For example, CaCl2 is the chemical formula for Calcium chloride and it shows is that the ratio of Calcium (Ca) to Chlorine (Cl) is 1:2.
The correct answer is C, the ratio of elements in the compound.
Compound:-
A compound is a substance that constitutes two or more elements in a defined proportion. A chemical compound is different from another compound in what it contains i.e. elements.
Chemical formula:-It shows the elements contained in a specific compound. For example, the chemical formula of sodium chloride (NaCl) shows us that it contains Sodium (Na) and Chlorine (Cl) elements as represented by symbols. A chemical formula also shows the ratio of each element that makes up the compound. An element can have more than one atom in a compound. For example, [tex]MgCl_2[/tex] is the chemical formula for Magnesium chloride and it shows that the ratio of Magnesium to Chlorine (Cl) is 1:2.Hence, the correct answer is C.
To know more about:-
brainly.com/question/12321571
why the renewable energy resource you chose is positive
Answer:
Renewable energy require less overall maintenance than generators that use traditional fuel sources. Renewable energy has numerous health and environmental benefits.
Explanation:
Baking soda, NaHCO3, can be commercially produced during a series of chemical reactions called the Solvay process. In this process, NH3(aq), NaCl(aq), and
other chemicals are used to produce NaHCO3(s) and NH Cl(aq).
To reduce production costs, NH3(aq) is recovered from NHCl(aq) through a different series of reactions. This series of reactions can be summarized by the
overall reaction represented by the unbalanced equation below.
NHACH(aq) + Ca(s) - NH3(aq) + H20() + CaCl(aq)
Balance the equation below for the overall reaction used to recover NH3(aq), using the smallest whole-number coefficients.
Answer:
CaO(s) + 2NH4Cl(aq) -------> CaCl2(aq) + H2O(l) + 2NH3(g)
Explanation:
The solvay process is an important process in the chemical industry. In this process, ammonia gas is first dissolved in concentrated brine to form a mixture known as ammoniacal brine. This solution is made to trickle down the tower. A counter stream of carbon dioxide is forced up the tower. The two substances react to form sodium hydrogen trioxocarbonate IV. This substance is only slightly soluble and separates out as a solid sludge. The product is now dried and heated to give sodium trioxocarbonate IV.
The overall reaction of the process can be given as;
CaO(s) + 2NH4Cl(aq) -------> CaCl2(aq) + H2O(l) + 2NH3(g)
Calcium chloride is merely a by-product.
Answer:
Based on Reference Table F, which solution will contain the highest concentration of
iodide ions?
A
lead iodide
silver iodide
mercury (II) iodide
iron (11) iodide
What forces does an electrically charge object experience because of its charge?
Answer:
electric force and newtons law
Explanation:
Calculating [H.]
DETERMINE THE CONCENTRATION OF HOF EACH SOLUTION
» [OH-] = 1 x 10-IM
CH'] =
» pH = 2
[H] =
» [OH ) = 1 x 10-8 M
(H"]=
» POH= 9
[H] -
Answer:
The answer to your question is given below below:
Explanation:
1. Data obtained from the question:
Concentration of Hydroxide ion, [OH-] = 1x10^-1 M
Concentration of Hydrogen ion, [H+] =..?
The concentration of Hydrogen ion and hydroxide ion are related with the following formula:
[H+] x [OH-] = 1x10^-14
[H+] x 1x10^-1 = 1x10^-14
Divide both side by 1x10^-1
[H+] = 1x10^-14 / 1x10^-1
[H+] = 1x10^-13M
2. Data obtained from the question include:
pH = 2
Hydrogen ion concentration, [H+] =..?
pH = - log [H+]
2 = - log [H+]
-2 = log [H+]
[H+] = antilog (-2)
[H+] = 0.01M
3. Data obtained from the question:
Concentration of Hydroxide ion, [OH-] = 1x10^-8 M
Concentration of Hydrogen ion, [H+] =..?
The concentration of Hydrogen ion and hydroxide ion are related with the following formula:
[H+] x [OH-] = 1x10^-14
[H+] x 1x10^-8 = 1x10^-14
Divide both side by 1x10^-8
[H+] = 1x10^-14 / 1x10^-8
[H+] = 1x10^-6M
4. Data obtained from the question include:
pOH = 9
Hydrogen ion concentration, [H+] =..?
First we shall determine the pH.
The pH and pOH are related with the following formula:
pH + pOH = 14
pH + 9 = 14
Collect like terms
pH = 14 - 9
pH = 5
Now, we can obtain the [H+] as follow:
pH = - log [H+]
pH = 5
5 = - log [H+]
-5 = log [H+]
[H+] = antilog (-5)
[H+] = 1x10^-5M
what are two factors about particles that enable them to form solutions (SCIENCE)
Answer:
temperature and whether or not they are polar or non-polar.
Which of the following represents a 1.00 M (M = mol/dm3) aqueous solution of glucose (C6H12O6)?
A. 180 g glucose per 1000 cm3 solution
B. 10.0 g glucose per 10.0 cm3 water
C. 90.0 g glucose per 500 cm3 water
D. 0.100 g glucose per cm3 solution
how many moles of H2O will be produced from 6 moles of 02
Answer: 12 moles H20
Explanation:
The tools of choice for stoichiometry problems will always be the mole ratios that exist between the chemical species that take part in the reaction.
2H2 [g] + O2 [g]------> 2H 2O (1]]
calculate the amount of I - 125 that remains after 178.2 days if we started with 300 grams.
Answer:
38.3 g
Explanation:
The half life of a substance is the time taken for the substance to decay to about half of its amount.
Let us assume that I-125 have a half life of 60 days. It means that every 60 days, the amount of I - 125 would be halved.
The amount of I - 125 (A) that remains after t days is given by:
[tex]A=A_o*\frac{1}{2^n} \\[/tex]
Where Ao is the initial amount and n = t / half life
Given that:
Ao = 300 g, t = 178.2 days.
Therefore n = t / half life = 178.2 days / 60 days = 2.97
[tex]A=A_o*\frac{1}{2^n} \\A=300*\frac{1}{2^{2.97}}\\ A=38.3\ g[/tex]
PLEASE HELP ME ASAP! CHEMISTRY TUTOR
SEE ATTACHED
Answer:
[tex]\large \boxed{\text{-827.4 kJ}}[/tex]
Explanation:
We have three equations:
1. 2H₂S(g) + O₂(g) ⟶ 2S(s, rhombic) + 2H₂O(g) ; ∆H = -442.4 kJ
2. S(s, rhombic) + O₂(g) ⟶ SO₂(g); ∆H = -296.8 kJ
3. PbO(s) + H₂S(g) ⟶ PbS(s) + SO₂(g); ∆H = -104.3 kJ
From these, we must devise the target equation:
4. 2PbS(s) + 3O₂(g) ⟶2PbO(s) + 2SO₂(g); ΔH = ?
The target equation has PbS(s) on the left, so you reverse Equation 3 and double it.
When you reverse an equation, you reverse the sign of its ΔH.
When you double an equation, you double its ΔH.
5. 2PbS(s) + 2H₂O(g) ⟶ 2PbO(s) + 2H₂S(g); ∆H = 208.6 kJ
Equation 5 has 2H₂O on the left. That is not in the target equation.
You need an equation with 2H₂O on the right, so you copy Equation 1.
6. 2H₂S(g) + O₂(g) ⟶ 2S(s, rhombic) + 2H₂O(g) ; ∆H = -442.4 kJ
Equation 6 has 2S(s, rhombic) on the right. That is not in the target equation.
You need an equation with 2S(s, rhombic) on the left, so you double Equation 2.
7. 2S(s, rhombic) + 2O₂(g) ⟶ 2SO₂(g); ∆H = -593.6 kJ
Now, you add equations 5, 6, and 7, cancelling species that appear on opposite sides of the reaction arrows.
When you add equations, you add their ΔH values.
You get the target equation 4:
5. 2PbS(s) + 2H₂O(g) ⟶ 2PbO(s) + 2H₂S(g); ∆H = 208.6 kJ
6. 2H₂S(g) + O₂(g) ⟶ 2S(s) + 2H₂O(g) ; ∆H = -442.4 kJ
7. 2S(s) + 2O₂(g) ⟶ 2SO₂(g); ∆H = -593.6 kJ
4 . 2PbS(s) + 3O₂(g) ⟶ 2PbO(s) + 2SO₂(g); ΔH = -827.4 kJ
[tex]\Delta H \text{ for the reaction is $ \large \boxed{\textbf{-827.4 kJ}}$}[/tex]