Sound waves travel better through solid than through a gas. Example why this is true​

Answer:

where is diagram. sorry.

Answer:

Photosynthesis defines the process by which plants and some bacteria manufacture glucose. Scientists summarize the process as follows: using sunlight, carbon dioxide + water = glucose + oxygen. The process occurs within special structures called chloroplasts located in the cells of leaves. Optimum photosynthetic rates lead to the removal of greater amounts of carbon dioxide from the local atmosphere, producing greater amounts of glucose. Since glucose levels within plants are difficult to measure, scientists utilize the amount of carbon dioxide assimilation or its release as a means to measure photosynthetic rates. During the night, for example, or when conditions are not prime, plants release carbon dioxide. Maximum photosynthetic rates vary between plant species, but crops such as maize can achieve carbon dioxide assimilation rates as high as 0.075 ounce per cubic foot per hour, or 100 milligrams per decimeter per hour. To achieve optimum growth of some plants, farmers keep them in greenhouses that regulate conditions such as humidity and temperature. There are three temperature regimes over which the rate of photosynthesis changes.

Low Temperature

Enzymes are protein molecules used by living organisms to carry out biochemical reactions. The proteins are folded into a very particular shape, and this allows them to bind efficiently to the molecules of interest. At low temperatures, between 32 and 50 degrees Fahrenheit – 0 and 10 degrees Celsius – the enzymes that carry out photosynthesis do not work efficiently, and this decreases the photosynthetic rate. This leads to a decrease in glucose production and will result in stunted growth. For plants inside a greenhouse, the installation of a greenhouse heater and thermostat prevents this from occurring.

Explanation:

Answer:

1. False 2.True3.True? Unsure

Explanation:

Answer:

Water has a molar mass of 18.015 g/mol . This means that one mole of water molecules has a mass of 18.015 g . So, to sum this up, 6.022⋅1023 molecules of water will amount to 1 mole of water, which in turn will have a mass of 18.015 g . 2.7144moles H2O ⋅6.022⋅1023molec.

Explanation:

Answer:

C = 0.2349 J/ (g °C)

Explanation:

Mass, m = 894.0g

Initial Temperature = −5.8°C

Final Temperature =  17.5°C

Temperature change = 17.5°C - (−5.8°C) = 23.3

Heat, H = 4.90kJ = 4900 J

Specific heat capacit, C = ?

The relationship between these quantities is given by the equation;

H = mCΔT

C = H / mΔT

C = 4900 / (894)(23.3)

C = 0.2349 J/ (g °C)

Answer:

A wave

Explanation:

A wave is a disturbance that carries energy from one place to another. Matter is not carried with the wave but instead a wave can move through matter.

Answer:

A Wave

Explanation:

Answer:

0.4323 ; 1.5394

Explanation:

Given that :

Specific gravity of Fibre (Sf) = 2.5

Specific gravity of Matrix (Sm) = 1.2

Mass of Fibre, Mf = 2.595g

Weight of composite specimen in water , Wc = 1.636g

Composite weight, Ww = 3.697 g

Weight of Fibre and matrix

Volume fraction of Fibre and matrix :

[(Mf/Sf) ÷ (Mf/Sf + Wc/Sm)] * 100

[(2.595/2.5) ÷ (2.595/2.5 + 1.636/1.2)]

(1.038 ÷ 2.4013333)

= 0.43225986

= 0.4323

2.)

Theoretical density of composite :

Weight of composite / (Mf/Sf + Wc/Sm)

3.697 / (2.595/2.5 + 1.636/1.2)

3.697 / 2.4013333

= 1.5395613

= 1.5394

Answer:

1. aa

2. They have similar DNA

Explanation:

1. According to the question 1, wrinkled seeds (A) are dominant over round seeds (a) in pea plants. This means that, based on the law of dominance proposed by Mendel, wrinkled seeds will be expressed over round seeds in a heterozygous state (Aa).

However, since the round seed phenotype is a recessive trait, it will only be expressed when the alleles for round seeds (a) are the same in the gene i.e. aa genotype.

2. Based on the information in question 2, Ricky, who is working on a family tree for his school project, realizes that his close relatives all look similar in the pictures he collected. This is possible because of the SIMILARITY OF THEIR DNA (genetic material). Note that, relatives are connected by the genes that are inherited from one another, hence, they possess a similar DNA, which is the most valid reason for the resemblance.

Answer:

Glucose has a chemical formula of: C6H12O6 That means glucose is made of 6 carbon atoms, 12 hydrogen atoms and 6 oxygen atoms. You will be building one type of sugar called glucose.

Explanation:

Answer:

You will remember that the difference between an aldehyde and a ketone is the presence of a hydrogen atom attached to the carbon-oxygen double bond in the aldehyde. Ketones don't have that hydrogen. ... Aldehydes are easily oxidized by all sorts of different oxidizing agents: ketones are not.

Answer:

[tex]k_2=2.46[/tex]

Explanation:

Hello!

In this case, according to the Arrhenius equation for variable temperature:

[tex]ln(\frac{k_2}{k_1} )=-\frac{Ea}{R}(\frac{1}{T_2} -\frac{1}{T_1} )[/tex]

Given the temperatures to be computed in kelvins and the activation energy, we obtain:

[tex]ln(\frac{k_2}{0.924} )=-\frac{89800J/mol}{8.314J/(mol*K)}(\frac{1}{306.45K} -\frac{1}{298.15K} )\\\\ln(\frac{k_2}{0.924} )=0.981\\\\k_2=0.924*exp(0.981)\\\\k_2=2.46[/tex]

Best regards!

Explanation:

kinetic energy Increases due to gravity. A rock being pushed down a hill increases in speed, due to gravity, what goes up must come down....

Answer:

See explanation

Explanation:

If we desire to recrystallize the given compound then we must do the following;

1) Add the compound to ethanol and heat the system

2) As the solute dissolves, the solution is allowed to cool

3) The solution may be seeded or the vessel scratched to aid crystallization.

4) The pure crystals are now filtered out, washed and dried.

Remember that recrystallization has to do with dissolving a solute in a solvent in which it is only soluble at high temperature but insoluble at low temperature.

The solvent dissolves the impure solute while pure crystals emerges as the temperature decreases.

Answer:

Add to a 500mL volumetric flask 300mL of water, the 129mL of the 11.6M HCl solution and then complete to volume with water

Explanation:

To make 500mL = 0.500L of a 3M HCl from the 11.6M HCl stock we need first to find the moles of HCl we need:

Moles HCl:

0.500L * (3mol / L) = 1.5 moles of HCl are needed

These moles are obtained from the 11.6M HCl solution. The volume required is:

1.5mol * (1L / 11.6moles HCl) = 0.129L = 129mL must be added to the solution.

That means to prepare the 500mL of the 3M HCl you need to:

Add to a 500mL volumetric flask 300mL of water, the 129mL of the 11.6M HCl solution and then complete to volume with water

Answer:

Calculation: 11.6 M × V = 3.0 M × 0.500 liters

V = 0.13 liters

Steps for dilution:

Measure out 0.13 liters of the concentrated solution of 11.6 M HCl using a volumetric pipet.

Transfer this into solution into a 500 milliliter volumetric flask.

Add water to the flask until it reaches a total volume of 500 milliliters.

Solution: V = 0.13 liters

Explanation:

answer:44.0095

Explanation:

sana makatulong

Answer:

44.0095

Explanation:

We assume you are converting between grams CO2 and mole. You can view more details on each measurement unit: molecular weight of CO2 or mol This compound is also known as Carbon Dioxide. The SI base unit for amount of substance is the mole.

Answer:

The answer is: ATP

(Im pretty sure)

Answer:

[tex]Li_2O[/tex]

Explanation:

Hello!

In this case, when looking over the chemical formula of a compound formed when two elements interact, we need to realize about their location in the periodic table; thus, since lithium is a metal and oxygen a nonmetal, we infer lithium turns out the cation and oxygen the anion. Moreover, as the oxidation state of lithium is 1+ and that of oxygen is 2-, we can set up the chemical formula as follows:

[tex]Li^+O^{2-}\\\\Li_2O[/tex]

Best regards!

Answer:

Explanation:

From the information above:

The equation for the reactor volume of CSTR is given by the formula:

[tex]V = \dfrac{C_{Ao}V_o - C_A V_o }{-rA}[/tex]

[tex]V = \dfrac{C_{Ao}V_o (1 - 0.01)}{KC_A^2}[/tex]

The reaction rate of A is:

[tex]-r_A = kC_A^2[/tex] and k = 3 dm³/mol.h

replacing the values in the above equation to solve for v;

∴

[tex]V = \dfrac{(0.5 \ mol/dm^3) (10 \ dm^3/h) (1 - 0.01)}{ ( 3 \ dm^3/mol.h) (0.01 \times 0.5 \ mol/dm^3)^2}[/tex]

V = 66,000 dm³

Thus, the reactor volume of CSTR is 66000 dm³

Taking the differential mole balance equation for PFR is as follows:

[tex]\dfrac{d(C_AV_o)}{dV} = -r_A[/tex]

[tex]\dfrac{d(C_AV_o)}{dV} = Kc^2A[/tex]

Taking the integral between initial and final concentrations;

[tex]\dfrac{v_o}{k} \int ^{C_A}_{C_{Ao}} \dfrac{dC_A}{C^2A}= - \int ^V_o \ dV[/tex]

[tex]V = \dfrac{V_o}{K} \Big [\dfrac{1}{C_A}- \dfrac{1}{C_{Ao}} \Big ][/tex]

replace the values in the above equation;

[tex]V= \dfrac{(10 \ dm^3/h) }{(3 \ dm^3/mol.h)}\Big [ \dfrac{1}{0.01(0.5 \ mol/dm^3)} - \dfrac{1}{0.5 \ mol/dm^3} \Big ][/tex]

[tex]\mathbf{V = 66 0 \ dm^3}[/tex]

Thus, the reactor volume of PFR is 660 dm³

Answer

2.Write the metal first ( if I am right) as it is ionised

Answer:

hydrogen

Explanation:

In electrolysis of water, gas evolved at cathode is hydrogen

Answer:

Oh, you are supposed to look up the yearly temp, and yearly rain for a certain area. I did this before!

Answer:

B

Explanation:

Answer:

definetly b

Explanation:

Given

Atomic symbol

Atomic composition

Solution

Atomic number = number of protons = number of electrons

Mass Number (A) is the sum of protons and neutrons

Number of protons and Number of Neutrons  in nucleus

Number of electrons in the shell

From the picture:

protons = 3

neutrons = 4

electrons = 3

atomic number = protons = electrons = 3

mass number = protons + neutrons = 3+4 = 7

The question is incomplete, the complete question is;

Aluminum metal and bromine liquid (red) react violently to make aluminum bromide (white powder). One way to represent this equilibrium is:

Al(s) + 3/2 Br2(l)AlBr3(s)

We could also write this reaction three other ways, listed below. The equilibrium constants for all of the reactions are related. Write the equilibrium constant for each new reaction in terms of K, the equilibrium constant for the reaction above.

1) 2 AlBr3(s) 2 Al(s) + 3 Br2(l)

2) 2 Al(s) + 3 Br2(l) 2 AlBr3(s)

3) AlBr3(s) Al(s) + 3/2 Br2(l)

Answer:

See explanation

Explanation:  

We have that; Al(s) + 3/2 Br2(l)AlBr3(s)

So;

Al(s) + 3/2 Br₂(l) = AlBr₃(s)

K = [  AlBr₃] / [ Al] [  Br₂]³/²

K² =  [  AlBr₃]² / [  Al ] ² [ Br₂]³

Now;

1) 2 AlBr₃ = 2 Al(s) + 3 Br₂(l) =

K₁ =  [  Al ] ² [ Br₂]³ /  [  AlBr₃]²

K₁ =  ( 1 / K² ) = K⁻²

For the second reaction;

2 ) 2 Al(s) + 3 Br₂(l) = 2 AlBr₃(s)

K₂ = [ AlBr₃ ]² / [  Al ]² [  Br₂ ]³

K₂ = K²

For the third reaction;

3 )

AlBr₃(s) =   Al(s) + 3/2 Br₂(l)

K₃  = [ Al ] [ Br₂ ] ³/² / [ AlBr₃ ]

=  ( 1 / K ) = K⁻¹

Answer:589 g

Explanation:just answered the question

Answer:

Measure the volume of water poured into a graduated cylinder, then place the object in the water and remeasure the volume. The difference between the two volume measurements is the volume of the object. Now simply divide the mass by the volume to calculate the density of the object.

Answer:

C. It may act as an insulator or a conductor.

Explanation:

Group B are the metalloids, so they have properties of both metals and nonmetals.

The statement which is most likely true for an element present in section B is: C. It may act as an insulator or a conductor.

A periodic table can be defined as an organized tabular array of all the chemical elements, which is typically arranged in order of increasing atomic number or number of protons (in rows).

In this diagram, the chemical element that is present in section B of the periodic table is a metalloid.

A metalloid can be defined as a chemical element that are typically intermediate between those of semiconductors, non-metals and metals.

In this context, the statement which is most likely true for an element present in section B is that it may act as an insulator or a conductor because it is a metalloid.

Read more: https://brainly.com/question/17482288

Answer:

a. always required

Explanation:

Accreditation of laboratories is a mandatory requirement for forensic science providers. To manage the quality of services provided by the forensic laboratories, Accreditation, Certification, and Interagency Working Group have found it necessary to make the accreditation of forensic laboratories mandatory.

This will instill confidence in the public and ensure that the services rendered by them are always accurate and up to standard.