Answer:
Speed is the change in distance over time; velocity is speed plus directionExplanation:
Speed is defined as the change in distance covered by a body with respect to time while velocity the change in displacement of a body with respect to time. Speed is a scalar quantity since it does not specifies direction while velocity is a vector quantity because it specifies both magnitude and direction.
Speed can only be equal to the velocity if it also specifies direction.
Based on the definition above, it can be concluded that speed is the change in distance over time and velocity is speed plus direction.
Answer:
Speed is the change in distance over time; velocity is speed plus direction.
Explanation:
I did it and got the test right
what type of circuit is shown?
A. open parallel circuit
B. open series circuit
C. closed parallel circuit
D. closed series circuit
Answer:
A. open parallel circuit im pretty sure
Explanation:
Answer:
D
Explanation:
The bulbs are on the same wire as the battery, so its series. Current is flowing so its closed.
Please help and show workings.
Effective resistance = 2+1.5 = 3.5 ohms
Current in the circuit = 1.2 A
Lost volts in the battery = 1.8V
Current in one of the 3 ohms resistors = 0.6 A
I hope it helps
Charge q is 1 unit of distance away from the source charge S. Charge p is two times further away. The force exerted
between S and q ls the force exerted between S and p.
Answer:
The correct answer will be "1/16".
Explanation:
The force or distance between two substances in charge seems to be inversely proportional to the square of the size of the particles.
The exerted force between "S" and "q" will be:
⇒ [tex]Fsq=\frac{{Q}'}{Q} 1^2[/tex] ...(equation 1)
The exerted force between "S" and "p" will be:
⇒ [tex]Fsp=\frac{{Q}'}{Q} 4^2[/tex] ...(equation 2)
Now,
On the comparison of "equation 1" and "equation 2", we get
⇒ [tex]\frac{1}{16}[/tex]
Which of the following describes an electric motor? Check all that apply. A. Is found in many appliances with moving parts, like a vacuum cleaner or a blender B. Uses the interaction between a spinning coil of wire and a magnet C. Can be powered by a hand crack D. Changes mechanical energy to electrical energy
Answer:
i believe a
Explanation:
On the moon, what would be the force of gravity acting on an object that has a mass of 7 kg?
Answer: 7 kg
Explanation:
what type of circuit is shown?
open parallel circuit
closed parallel circuit
closed series circuit
open series circuit
Answer:
open series circuit, (c)
Explanation:
Suppose you roll a bowling ball (m1)down the alley, and the ball strikes the pin (m2) sending it flying. The mass of the bowling ball is greater than the mass of the
pin. Predict the magnitude of the forces between the two objects during the collision
A)The bowling ballexerts a larger force on the pin because it was moving at
a high speed,
B)The pin exerts a larger force on the bowling ball
C)The bowing ball exerts a larger force on the bin because it is more massive
D)Both objects blert the same magnitude of force on each other due to Newtonsard Law
Answer:
The correct option is;
D) Both objects exert the same magnitude of force on each other due to Newton's 3rd law
Explanation:
Newton's third law of motion states that for every action there is an equal and opposite reaction
Since the bowling ball is rolled down the alley while the pin is displaced at such a speed that it flew, we have that the velocity of the rolling ball, v₁ is less than the velocity of the flying pin v₂
Therefore, whereby force = Rate of change of momentum produced we have;
The change of momentum of the ball = m₁×(v₁ - v₁ₐ)
The change of momentum of the pin = m₂×(0 - v₂)
Hence since the pin change in movement (flight) was more suddenly than the slowing down of the ball, the action of the rolling ball is equal to the reaction of the flying pin.
The temp of equal masses of three different liquids A,BandC are 12°C,19°Cand 28°Crespectively . The temp when A and B are mixed is 16°C, and when Band C are mixed is 23°C.The temp when A and C are mixed is
Answer:
19.1°C
Explanation:
If A and B mix to give 16°C, A has risen by 4°C and B has fallen by 3°C;
If B and C mix to give 23°C, B has risen by 3°C and C has fallen by 5°C;
This means the energy transfered to cause a change of 3°C in B causes a change of 4°C in A and 5°C in C;
We can use this as a ratio (4:5);
The temperature difference between A and C is 16°C;
we add the two parts of the ratio (4+5) to get 9 and divide the temperature difference to get 16/9;
Next we multiply this by one of the parts of the ratio, so with 4, you get 64/9;
This number is the proportional temperature change in A upon mixing;
We then add this to the original temperature of A to get the resultant temperature of the mix like so:
64/9 + 12 = 19.1111...
You can do this alternatively using the other part of the ratio;
We would multiply the 16/9 by the 5 instead of the 4 to get 80/9;
This number is the proportional change in temperature in C upon mixing
Then subtract this from this from the original temperature of C and you should get the same answer:
28 - 80/9 = 19.1111...
Buoyancy is a force that always acts in a _____ direction, exerted by a fluid on a body placed in the fluid.
Answer:
Upwards direction
Explanation:
The buoyancy force is caused by the pressure exerted by the fluid in which an object is immersed. The buoyancy force always points upwards because the pressure of a fluid increases with depth.
Answer:
Upwards direction
Explanation:
An object with a mass of 120 kilograms is moving at a velocity of 30m/s what’s its momentum
Explanation:
Momentum = mass × velocity
p = mv
p = (120 kg) (30 m/s)
p = 3600 kg m/s
Given:
velocity, v = 30m/s
mass, m = 120kg
Therefore, momentum
p = mv
p = 120kg * 30m/s
p = 3600 kgm/s = [tex]3.6 * 10^3 kgms^{-1}[/tex]
What is a simple definition of momentum?A property of a moving body that the body has by virtue of its mass and motion and that is equal to the product of the body's mass and velocity broadly.
What is momentum used for in physics?Momentum is a vector quantity, it has both magnitude and direction. Since momentum has a direction, it can be used to predict the resulting direction and speed of motion of objects after they collide.
Learn more about Momentum here
https://brainly.com/question/904448
#SPJ2
The direction of a vector that points somewhere between due north and due
east is measured in
A. centimeters
B. degrees
C. hours
D. miles
Answer: B
Degree
Explanation:
The direction of vectors are always measured in angles starting from the north. That is, in an anticlockwise direction. But the unit of angle is degree. Therefore, the direction of a vector that points somewhere between due north and due east is measured in degree.
Answer:degrees
Explanation:
For a current to flow continuously through a circuit, the circuit must be:
Answer:
An electrical current is an electrical charge flowing around a circuit. Carried by billions of tiny particles called electrons, the charge is already in the wires.
Explanation:
There are three basic conditions for the electric current flow is to be given below:-
The loop must be shuttered where current throws occur. There must be some possible distinctions in the chain. The medium in which current flows will be a conductor (but flow in the semiconductor at a higher temp. current).
if the distance from the source is doubled, what will happen to sound intensity
Answer: sound intensity will decrease to the one - fourth of its initial value.
Explanation:
The relationship between sound intensity and the distance obeys inverse square law, where the intensity of sound is inversely proportional to the square of the distance. That is,
I = 1/ r^2
Where
I = sound intensity
r = distance.
If the distance from the source is doubled, sound intensity will decrease in value to the one - fourth of its initial value.
What was Neptune's distance from the Sun in 1989?
Answer:
4.5 Billion km :)
Explanation:
thats how it is
Answer:
About 3.8 billions miles from the Sun OR 4.82 kilometers
hope this helped!
A group of students gather for some fun during their summer break from school. Kendall and Jacoby have a water balloon fight during one of those “lazy” days of summer.
Marie, Gary, and Lois remember a video about work that their science teacher, Ms. Lewis, showed them before they left for vacation.
Marie says: “If Kendall throws a water balloon at Jacoby, there is no work being done. It’s just boys being boys.”
Gary says: “If Kendall throws a water balloon at Jacoby, there is work being done by Jacoby because he has to run.”
Lois says: “If Kendall throws a water balloon at Jacoby, there is work being done because Kendall had to exert a force that made the water balloon travel a certain distance to hit Jacoby.”
Which one of them is correct and why? Answer in complete sentences! You can type on this document and turn in.
Answer:
lois is right because throwing the water balloon is exerting a force running is not
A helicopter travels west at 80 mph. It is moving above a car traveling on a highway at 80 mph. Given this information, you can determine that the helicopter and car are traveling ____.
Select one:
a. in the same direction
b. in different directions
c. at the same speed
d. at the same velocity
Answer:
d. at the same velocity
Explanation:
I will assume the car is also travelling westward because it was stated that the helicopter was moving above the car. In that case, it depends where the observer is. If the observer is in the car, the helicopter would look like it is standing still ( because both objects have the same velocity). If the observer is on the side of the road, both objects would be travelling at the same velocity. Also recall that, velocity is a vector quantity; it is direction-aware. Velocity is the rate at which the position changes but speed is the rate at which object covers distance and it is not direction wise. Hence velocity is the best option.
Answer:
C. At the same speed
Explanation:
I just took the exam and got the answer correct
What is the proper function of a linkage? *
1 point
a) transferring energy
b) transferring speed
c) transferring money
d) transferring weight
asap plz, for science loverz
brainliest for the best answer!
Answer:
a) transferring energy
Explanation:
A linkage is an assembly of parts connected together to control forces and movement. The connections between links are called joints and are used for ensuring movement, pure rotation or sliding.
Linkages provides a means in which kinetic energy is being transferred in different directions within a system. This Linkages can be used to Change force direction, size of force applied or the motion created by the force.
The mean diameter of the Earth is 12.76 x 103 km. What is the surface area of the Earth in m2 ?
(A) 4.01 x 107
(B) 5.12 x 1014
(C) 1.09 x 1021
(D) 1.68 x 109
(E) 2.05 x 1015
Answer:
The Answer is B
Explanation:
Hope this Helps :D
Which figure represents the electric field lines of two negative point charges?
Help
Answer:
The question is incomplete because the options are not given. We'll solve this question with the options.
There are two properties of negative charges which we have to consider to find the figure of its electrical field.
Firstly, for a negative charge, the electrical field lines are always directed radially outwards and they don't intersect.
Secondly, we know that similar charges repel each other, so there will be no electrical field present directly between these two negative charges. Electrical field line will be present between two charges only when there is a force of attraction.
Taking both of these facts into consideration, the electrical field line between two negatives is represented by the figure below.
Answer:
Figure C
Explanation:
Got it correct on Edmentum
static electricty is the study of..
A buildup of charge
B electric discharges
C electric fields
D all of the above
Answer:
all of the above
Explanation:
i study this kind of stuff in school
WHAT IS CHANGE OF STATE
Answer:
a change from one state (solid or liquid or gas) to another without a change in chemical composition
Explanation:
Explanation:
From Solid to. Liquid to Gas A change of state is the change of a substance from one physical form to another. All changes of state are physical changes. The particles have different amounts of energy when the substance is in different states.
:What will be the value of the refractive index of the medium? Critical angle of that medium is 30 degree
a) 2
b) 1.5
c) 1.8
d) 1
Answer:
Let the second medium be air (n₁=1)
The refractive index n₂ of the medium where first medium is air is found (a)
(a) n₂ = 2
Explanation:
Critical angle can be defined as the angle of incidence that provides the angle of refraction of 90°.
Refractive index of a medium can be defined as a number that describes that how fast a light will travel through that medium.
Critical angle and Refractive index are related by:
[tex]\theta_{critical}= sin^{-1}(\frac{n_1}{n_2})[/tex]
[tex]sin \theta_{critical}=\frac{n_1}{n_2}[/tex]
To find refractive index of medium with respect to air, substitute n₁=1 (Refractive index of air is 1)
Also θ(critical)=30°
Find n₂ :
[tex]sin30= \frac{1}{n_2}\\0.5=\frac{1}{n_2}\\n_2=\frac{1}{0.5}\\n_2=2[/tex]
What is true about an electric field around a positive charge?
A The electric field points inward.
B The electric field points in both directions.
C The electric field points outward.
Answer:
C
Explanation:
the electric field point radically away from the charge
Describe the relationship between frequency and wavelength
Answer:
Frequency and wavelength are inversely related.
Explanation:
Frequency and wavelength have an inverse relationship because if one thing goes up another goes down. For example, if frequency goes up, the wavelength goes down and vice versa.
Answer:
The relationship between wavelength and frequency is that the frequency of a wave multiplied by its wavelength gives the speed of the wave.
Explanation:
Frequency and wavelength are related terms also, used to describe electromagnetic radiation or light. One simple equation is used to convert between them: frequency x wavelength = speed of light. λ v = c, when λ is wavelength, v is frequency, and c is the speed of light.
I know I'm really late but I hope this helps lol
What is a good analogy for potential energy in a circuit?
Answer: find the answer in the explanation
Explanation: The potential energy in a circuit between two points is the workdone in taking units positive charge from one point to the other in the circuit. Its S.I unit is Joule.
Because voltage of a battery or cell in a circuit is the potential energy difference across its terminal
The potential energy difference between two points is one volt, if the workdone in taking one Coulomb of positive charge from one point to the other is one Joule.
What is needed to change a solid to a gas ?
Answer:
add energy
Explanation:
bc adding heat is energy which can make water turn into gas.
What is the photoelectric effect?
A the absorption of particles by a metal surface that is exposed to red light or infrared rays
B the proportional relationship between a photon's energy and the frequency of light.
C the emission of electrons from a metal caused by light striking the metal
D the ability of specialized photons to bounce off a metal surface.
Answer: C
the emission of electrons from a metal caused by light striking the metal
Explanation:
Photo means anything related to light in Physics and science generally.
Photoelectric effect explains the effect of light incident on metal surfaces by knocking out electrons on the metal surfaces.
The correct option is C
the emission of electrons from a metal caused by light striking the metal
If you have two waves, one with a frequency of 4.4 x 1010 Hz and one with a frequency of 3.6 x 1014 Hz, which has the highest energy? Justify your answer
with evidence from the lesson and/or mathematically.
Answer: frequency of 3.6 x 10^14 Hz
Explanation:
If someone have two waves, one with a frequency of 4.4 x 1010 Hz and one with a frequency of 3.6 x 1014 Hz, the one with higher frequency ( 3.6 × 10^14) will have the higher energy.
From electromagnetic spectrum,
E = hf
Where
E = energy
F = frequency
h = Planck constant
The one with higher frequency will have the higher energy since energy is directly proportional to the frequency.
The one with higher frequency ( 3.6 × 10^14) will have the highest energy.
What is the frequency?Frequency is the number of oscillations per second in the sinusoidal wave.
If someone have two waves, one with a frequency of 4.4 x 10¹⁰ Hz and one with a frequency of 3.6 x 10¹⁴ Hz.
From electromagnetic spectrum, energy associated with the frequency is
E = hf
Where, E = energy, f = frequency and h = Planck constant
The Planck's constant is the constant value. The energy is directly proportional to the frequency.
Thus, The one with higher frequency will have the higher energy since energy is directly proportional to the frequency.
Learn more about frequency.
https://brainly.com/question/25867078
#SPJ5
ILL MARK YOU THR BRAINLIEST SOMEONE PLS HELP ITS URGENT.
The acceleration of a skydiver of mass 80 kg changes from 9.8 m/s ^ 2 to 5.8 m/s ^ 2 as he falls through the air. What is the air resistance experienced by him?
Answer:
320N
Explanation:
Net force =w- AR
AR=w -force
AR=mg- ma
AR=80*9.8- 80*5.8
AR=784- 464
AR=320N
hi:) is question 6 correct?
-- When you see the words "uniform speed", that means the car's speed is not changing.
-- Right under those words in the picture, there's a note to remind you that "uniform speed" also means "acceleration is zero".
-- The whole key to this question is to find out if you remember that acceleration and net force always go together.
.==> If there's net force, then there's acceleration.
.==> If there's acceleration, then there's net force.
.==> If there's NO net force then there's NO acceleration.
.==> If there's no acceleration, then there's no net force.
-- In this picture, there's no acceleration, so there's no net force.
-- The driving force on the car is 2000N forward.
-- But the car's speed is not changing, so the net force on the car must be zero.
-- So that 'resisting' force pulling the car backwards must be 2000N. Then the net force on the car adds up to zero.
-- If the resisting force pulling the car backwards is not zero, then the net force on the car would not be zero, and the car's speed would be changing.