Answers
Answer:
P since without a host the parasite won't be able to survive they would start decreasing as well but if the hosts were no more then they would go extinct. But since it is just decreasing then it should be P
Related Questions
One of the ways in which a coin operated vending machine checks to make sure that the coins fed to it are genuine is to roll them past a strong magnet. Group of answer choices Coins made of a good conductor will slow down as they roll past the magnet. Coins made of a good conductor will speed up as they roll past the magnet. Only coins made of magnetic materials such as iron will be affected by the magnet. The coins will become magnetized and thus can easily be sorted.
Answers
Answer:
Coins made of a good conductor will slow down as they roll past the magnet.
Explanation:
Conduction involves the transfer of electric charge or thermal energy due to the movement of particles. When the conduction relates to electric charge, it is known as electrical conduction while when it relates to thermal energy, it is known as heat conduction.
One of the ways in which a coin operated vending machine checks to make sure that the coins fed to it are genuine is to roll them past a strong magnet. As such, coins made of a good conductor will slow down as they roll past the magnet due to the force of attraction that exists between the magnet and the coin (metal).
This ultimately implies that, the magnet tends to attract the coin to itself and as such slowing down the motion of the coin. Similarly, if it's a fake coin, it simply means it would be a bad conductor and as such it will roll fast past the strong magnet.
Se lanza un objeto hacia arriba y en 3.2 segundos cae. Determinar la altura máxima a la que llegó y la velocidad con la que choca con el piso.
Answers
What are four reasons why it is important to apply for entry at tertiary institutions while you are still at grade 11
Answers
Answer:
Explanation:
The main reason for doing this is to get the attention of the tertiary institutions early. There are thousands of students that apply to these institutions every year, depending on the strictness of the acceptance of these institutions it may or may not be difficult for you to enter. Applying while at grade 11 gives you more chances of getting in as you are catching the attention of the institution and showing a high level of interest. This also allows you more chances to enter, since if you are denied you can try again next year. Aside from this, some institutions have specific requirements, applying early can allow you to know what you are missing as they will tell you if you get denied. You can then work towards obtaining these requirements and apply next year.
A heavy piano is pushed up an inclined plane into a moving van. Which of the following choices best explains how the inclined plane made the task easier?
1. The force needed to move the piano up the plane was less than the force needed to lift it straight up into the van, but the distance over which the piano moved was greater.
2.The force exerted on the piano was the same as if it had been lifted, but the distance it needed to be move decreased, so the total work decreased.
3.The distance that the piano was moved was less that the distance it would have had to be lifted, so the total work decreased.
4. The amount of force need to push the piano up the ramp is the same as the force needed to lift it, so the amount of work remained the same.
Answers
The term mechanical advantage has to do with the ratio of the load to the effort.
What is mechanical advantage?
The term mechanical advantage has to do with the ratio of the load to the effort. There is a mechanical advantage when the effort applied is less than the load.
Hence, the task is made easier because the force needed to move the piano up the plane was less than the force needed to lift it straight up into the van, but the distance over which the piano moved was greater.
Learn more about mechanical advantage:https://brainly.com/question/20521425
#SPJ1
A group of students are doing a reading activity in their classroom. They suddenly hear the noise of a truck in the parking lot of their school. They can hear it but cannot see it. Which of the following explains why they can hear the truck, but cannot see it?
Answers
Answer:
The answer is the sound waves can travel through some material (not all) and visible light cannot.
Explanation:
I did this question on study island so I know the answer.
Answer:
the answer is: sound can be transmitted through the walls, but visible light cannot.
Explanation:
Jenise is buying a car for $7,020. The TAVT rate is 9.1%.
What is the amount of tax that Jenise will have to pay on her car?
Answers
Answer:
$7,658.82
Explanation:
Sales Tax Calculations:
Sales Tax Amount = Net Price x (Sales Tax Percentage / 100)
Total Price = Net Price + Sales Tax Amount
Net Price: $ 7,020.00
+Sales Tax (9.1%): $ 638.82
Total Price: $ 7,658.82
Therefore, the amount of tax that Jenise has to pay on her car is $7,658.82
What is the work done by gravity on a 4 kg ball
a. as it goes from point B to point A?
b. As it goes from point A to C?
(horizontal distance between A and B is 8 m; between B and C is 3.2 m)
Answers
Answer:
a. Work done = 313.92 Joules
b. Work done = 439.49 Joules
Explanation:
Work done = Force x distance
Where: Force = mass x gravity
Thus,
Work done = Force x gravity x distance
The earth's acceleration to gravity = 9.81 m/[tex]s^{2}[/tex].
a. The work done as it goes from B to A can be determined as;
work done = 4 x 9.81 x 8
= 313.92 Joules
b. The distance between A and C is the total horizontal distance covered from A to C.
i.e 8 + 3.2 = 11.2 m
The work done as the ball goes from point A to C can be determined as:
work done = 4 x 9.81 x 11.2
= 439.488
work done = 439.49 Joules
What is the maximum flow rate of water in a smooth pipe 8.0 cm diameter if the flow is to be laminar
Answers
Answer:
0.05 m/s
Explanation:
We start by finding the average velocity of water in the pipe. This is done by saying
R(e) = ρv(avg)d/μ
Where,
R(e) = Reynolds number, and that's 2000
ρ = Density of water, 1000 kg/m³
μ = Viscosity of water, 10^-3
d = diameter of pipe
v(avg) = average velocity
Since we're interested in average velocity, we make v(avg) the subject of formula. So that
V(avg) = R(e).μ/ρ.d
V(avg) = 2000 * 10^-3 / 1000 * 0.08
V(avg) = 2 / 80
V(avg) = 0.025 m/s
The maximum flow rate of water in the pipe usually is twice the average velocity, and as such
V(max) = 2 * V(avg)
V(max) = 2 * 0.025
V(max) = 0.05 m/s
Please answer correctly
Will give the brainliest !!
Please help me
Urgent!!
Please don't answer from links
Please ....can I have the correct Answers?
it's Urgent !!!
Answers
1.45 L of 16°C water is placed in a refrigerator. The refrigerator's motor must supply an extra 10.7 W power to chill the water to 6°C in 0.7 hr. What is the refrigerator's coefficient of performance?
Answers
Answer:
The coefficient of performance of the refrigerator is 2.251.
Explanation:
In this case, the coefficient of performance of the refrigerator ([tex]COP[/tex]), no unit, is equal to the ratio of the heat rate received from the water to the power needed to work, that is:
[tex]COP = \frac{\dot Q_{L}}{\dot W}[/tex] (1)
[tex]COP = \frac{\rho\cdot V\cdot c_{w}\cdot \Delta T}{\dot W \cdot \Delta t}[/tex] (2)
Where:
[tex]\dot Q_{L}[/tex] - Heat rate received from the water, in watts.
[tex]\dot W[/tex] - Power, in watts.
[tex]\rho[/tex] - Density of water, in kilograms per cubic meter.
[tex]V[/tex] - Volume of water, in cubic meters.
[tex]c_{w}[/tex] - Specific heat of water, in joules per kilogram-degree Celsius.
[tex]\Delta T[/tex] - Temperature change, in degrees Celsius.
[tex]\Delta t[/tex] - Cooling time, in seconds.
If we know that [tex]\rho = 1000\,\frac{kg}{m^{3}}[/tex], [tex]V = 1.45\times 10^{-3}\,m^{3}[/tex], [tex]c_{w} = 4187\,\frac{J}{kg\cdot ^{ \circ}C}[/tex], [tex]\Delta T = 10\,^{\circ}C[/tex], [tex]\dot W = 10.7\,W[/tex] and [tex]\Delta t = 2520\,s[/tex], then the coefficient of refrigeration of the refrigerator is:
[tex]COP = \frac{\rho\cdot V\cdot c_{w}\cdot \Delta T}{\dot W \cdot \Delta t}[/tex]
[tex]COP = 2.251[/tex]
The coefficient of performance of the refrigerator is 2.251.
The ancient Egyptians build their pyramids using a ramp to move the heavy blocks up. The length of the ramp was 25m and the height was 10m the weight of the block was 250kg and the effort weight is 180kg. What is the efficiency of the inclined plane
Answers
Answer:
Efficiency of the inclined plane is 56%
Explanation:
efficiency = (work output / work input) x 100%
efficiency = ([load force x load distance] x [effort force x effort distance]) x 100%
efficiency = (250 kg x 10 m) / (180 kg x 25 m) x 100%
efficiency = (2500kg/m) / (4500kg/m) x 100%
efficiency = 0.555 = 0.56 x 100%
efficiency = 56%
12. Which of the following statements is accurate?
A. If an object's velocity is changing, it's experiencing either acceleration or deceleration.
B. If an object's velocity decreases, then the object is accelerating
C. If an objects said to be decelerating, its velocity must be increasing,
D. If an object's velocity remains constant, its acceleration must be increasing.
Answers
Answer:
Option (a) is correct
Explanation:
The acceleration of an object is defined as the rate of change of velocity. Mathematically, it can be written as :
[tex]a=\dfrac{v-u}{t}[/tex]
Where
v and u are final and initial velocity
It is clear that if there is some change in velocity, it means the object is experiencing either acceleration or deceleration. Hence, the correct option is (a).
Answer:
a
Explanation:
differences between mass and weight
Answers
Explanation:
Mass : -
1. It is the amount of mass present in an object.
2. SI unit : Kilograms ( kg )
3. Relation between Mass and Weight is W = mg.
Weight : -
1. It is the force with which it is attracted towards the centre of the earth.
2. SI unit : Newton ( N )
3. Relation between Mass and Weight is W = mg.
Mass is a measure of the amount of matter in an object, while weight is a measure of the force of gravity on the object.
The plates on a vacuum capacitor have a radius of 3.0 mm and are separated by a distance of 1.5 mm. What is the capacitance of this capacitor?
Answers
Please help!
The Moon itself does not produce light. It appears to be lit because it is _____________ light from the Sun. *
A)absorbing
B)Reflecting
C)capturing
D)stealing
Answers
Answer:
it's b the moon reflect light from the sun
The behavior of the light incident upon this page best illustrates the phenomenon of
A)
diffuse reflection
B)
regular reflection
C)
diffraction
D)
refraction
Answers
Answer:
diffraction
Explanation:
The behavior of the light incident upon this page best illustrates the phenomenon of diffraction
hope it help:)
The behaviour of such incident light on just this pages adequately exemplifies the phenomena called Diffraction. A further explanation is below.
DiffractionThe broadening out of waveforms when they transit through such an apertures anywhere around obstructions generally referred to as diffraction.
It happens whenever the aperture as well as obstruction seems of the equivalent order of magnitude as that of the transmitted beam's wavelength.
Thus the approach above i.e., option C is correct.
Find out more information about Diffraction here:
https://brainly.com/question/16749356
The 500-N force F is applied to the vertical pole as shown(1) Determine the scalar components of the force vector F along the x'- and y'-axes. (2) Determine the scalar components of F along the x- and y'-axes.
Answers
Solution :
Given :
Force, F = 500 N
Let [tex]$ \vec F = F_x\ \hat i + F_y\ \hat j$[/tex]
[tex]$|\vec F|=\sqrt{F_x^2+F_y^2}$[/tex]
∴ [tex]$F_x=F \cos 60^\circ = 500 \ \cos 60^\circ = 250 \ N$[/tex]
[tex]$F_y=-F \cos 30^\circ = -500 \ \cos 30^\circ = -433.01 \ N$[/tex] (since [tex]$F_y$[/tex] direction is in negative y-axis)
[tex]$F=250 \ \hat i - 433.01 \ \hat j$[/tex]
So scalar components are : 250 N and 433.01 N
vector components are : [tex]$250 \ \hat i$[/tex] and [tex]$-433.01\ \hat j$[/tex]
1. Scalar components along :
x' axis = 500 N, since the force is in this direction.
[tex]$F_{x'}= F \ \cos \theta = 500\ \cos \theta$[/tex]
Here, θ = 0° , since force and axis in the same direction.
So, cos θ = cos 0° = 1
∴ [tex]$F_{x'}=500 \times 1=500\ N$[/tex]
[tex]$F_{y'}= F \ \sin \theta = 500\ \sin 0^\circ=500 \times 0=0$[/tex]
[tex]$F_{y'}=F\ cos \theta$[/tex] but here θ is 90°. So the force ad axis are perpendicular to each other.
[tex]$F_{y'}=F\ \cos 90^\circ= 500 \ \cos 90^\circ = 500 \times 0=0$[/tex]
∴ [tex]$F_{x'}= 500\ N \text{ and}\ F_{y'}=0\ N$[/tex]
2. Scalar components of F along:
x-axis :
[tex]$F_x=F\ \cos \theta$[/tex], here θ is the angle between x-axis and F = 60°.
[tex]$F_x=500 \times \cos60^\circ=250\ N$[/tex]
y'-axis :
[tex]$F_{y'}=F\ \cos \theta$[/tex], here θ is the angle between y'-axis and F = 90°.
[tex]$F_{y'}=500 \times \cos90^\circ=500\times 0=0\ N$[/tex]
∴ [tex]$F_{x}= 250\ N \text{ and}\ F_{y'}=0\ N$[/tex]
When forming a ion, oxygen will have what charge?
Answers
Answer:
it will have a charge of -2
Explanation:
HELLLP! PHYSICAL SCIENCE GUYS THANK YOU!!
Answers
Which of the following occurs when the fight-or-flight response is triggered?
Answers
Answer:
A or BExplanation:
The autonomic nervous system has two components, the sympathetic nervous system and the parasympathetic nervous system. The sympathetic nervous system functions like a gas pedal in a car. It triggers the fight-or-flight response, providing the body with a burst of energy so that it can respond to perceived dangers.
A magnifying glass has a converging lens of focal length of 13.8 cm. At what distance from a nickel should you hold this lens to get an Image with a magnification of +2.37?
cm
Answers
Answer:
19.6 cm.
Explanation:
From the question given above, the following data were obtained:
Focal length (f) = 13.8 cm
Magnification (M) = +2.37
Object distance (u) =.?
Next, we shall determine the image distance. This can be obtained as follow:
Magnification (M) = +2.37
Object distance (u) = u
Image distance (v) =?
M = v / u
2.37 = v / u
Cross multiply
v = 2.37 × u
v = 2.37u
Finally, we shall determine the object distance. This can be obtained as follow:
Focal length (f) = 13.8 cm
Image distance (v) = 2.37u
Object distance (u) =.?
1/v + 1/u = 1/f
vu / v + u = f
2.37u × u / 2.37u + u = 13.8
2.37u² / 3.37u = 13.8
Cross multiply
2.37u² = 3.37u × 13.8
2.37u² = 46.506u
Divide both side by u
2.37u² / u = 46.506u / u
2.37u = 46.506
Divide both side by 2.37
u = 46.506 / 2.37
u = 19.6 cm
Thus, the lens should be held at a distance of 19.6 cm.
PLSSS HELPP
If humans are evolving, who is having the biggest effect on humanities gene pool? Rich vs poor? Educated vs uneducated? Certain countries over others? Etc.? And how will this affect our evolution in the future?
Answers
Answer:
Well, if you look up countries with the highest birth rates, also those countries poverty rates and what class the majority of the people are in then you should have a better understanding. Also, education is not passed through genes it is learned through expirience and being taught. Also being rich vs being poor probably doesn't have that big of an effect either. It is the living conditions.
Explanation:
The forces shaping the short-term future of man, perhaps to the turn of this century, are apparent, and the events are in train. The shape of the world in the year 2000 and man's place therein will be determined by the manner in which organized humanity confronts several major challenges. If sufficiently successful, and mankind escapes the dark abysses of its own making, then truly will the future belong to man, the only product of biological evolution capable of controlling its own further destiny.
please mark in brain list
GIVING BRAINLIEST PLEASE HELP!!
-if you answer correctly ill give you brainliest which will give you 27pts-
Answers
Answer:
C. The lever applies three times more force than you hand can apply.
Explanation:
Since it's advantage is 3, that means you'll have to multiply the input of it by 3, making this apply 3x more force than your hand.
Hope this helped! <3
Source(s): Me and a bit of g*ogle for clarification
If the elevation of the head of a stream is at 900 feet, and the elevation of the mouth of the stream is 500 feet, and the distance between the two points is 20 miles, and the meandering stream flows 25 miles between those points, what is the gradient of the stream?
Answers
Answer:
80 feet per mile
Explanation:
Given that a the elevation of the head of a stream is at 900 feet, and the elevation of the mouth of the stream is 500 feet, and the distance between the two points is 20 miles, and the meandering stream flows 25 miles between those points, what is the gradient of the stream?
The gradient will be calculated by using the formula
M = change in feet ÷ change in miles
Where
M = gradient of the stream.
Change in feet = 900 - 500 = 400 feet
Change in miles = 25 - 20 = 5 miles
M = 400 / 5
M = 80
Therefore, the gradient of the stream is 80 ft per mile
Here is a list of ways of producing electricity
A ) Wind farms
B ) Coal fired power stations
C ) hydroelectric power stations
D ) nuclear power stations
E ) gas fired power stations
F ) tidal power stations
G) using geothermal energy
(1) State which of these produces clean electricity
(2) State which of these uses fossils fuel
(3) state which of these uses a renewable energy resources
Please help me
Please do not answer from links
Urgent !!!!!!
Will give the brainliest!
* please answer correctly
Answers
Answer:
1) A,B,F,G
2)B,D,E
3) A,C,F,G
Explanation:
It is much more difficult to move a dresser full of clothes than an empty dresser
Answers
Answer:
Newton's Law 2
Hope this helps!
Explain how radioactive decay works for measuring the absolute age of ancient objects.
Answers
Answer: Radioactive decay is the breakdown of a material into stable isotopes which are used for determining the age of the ancient material.
Explanation:
The radioactive decay is a natural process in which an ancient or old material whether in the form of rock, object or fossil break down into elements. Carbon 14 is an unstable isotope which decays to produce stable elements, the dating procedure uses these stable elements and the rate of decay of the isotopes to determine the age of absolute ancient of the objects but exact age cannot be determined just an approximation can be accepted.
The orbital radius of the Earth (the average Earth-Sun distance) is 1.496 × 1011 m. Mercury’s orbital radius is 5.79 × 1010 m and Pluto’s is 5.91 × 1012 m. Calculate the time required for light to travel from the Sun to each of the three celestial bodies
Answers
Answer:
Earth: [tex]t = 498.667\,s[/tex], Mercury: [tex]t = 193\,s[/tex], Pluto: [tex]t = 19700\,s[/tex]
Explanation:
The light travels at a constant speed of approximately [tex]3\times 10^{8}[/tex] meters per second. The time ([tex]t[/tex]), in seconds, required for light to travel a given distance is:
[tex]t = \frac{x}{v_{l}}[/tex] (1)
Where:
[tex]x[/tex] - Travelled distance, in meters.
[tex]v_{l}[/tex] - Speed of light, in meters per second.
Now, we calculate the time for light to travel to each planet:
Earth ([tex]v_{l} = 3\times 10^{8}\,\frac{m}{s}[/tex], [tex]x = 1.496\times 10^{11}\,m[/tex])
[tex]t = \frac{x}{v_{l}}[/tex]
[tex]t = 498.667\,s[/tex]
Mercury ([tex]v_{l} = 3\times 10^{8}\,\frac{m}{s}[/tex], [tex]x = 5.79\times 10^{10}\,m[/tex])
[tex]t = \frac{x}{v_{l}}[/tex]
[tex]t = 193\,s[/tex]
Pluto ([tex]v_{l} = 3\times 10^{8}\,\frac{m}{s}[/tex], [tex]x = 5.91\times 10^{12}\,m[/tex])
[tex]t = \frac{x}{v_{l}}[/tex]
[tex]t = 19700\,s[/tex]
PLS ANWSER FAST WILL GIVE BRAINL!!!!
Explain to me in YOUR own words, how convection currents create a cycle? In other words, tell me how heat and cooling create a cycle.
Answers
Answer:
because it get the energy from the heat and the cold mixed together
Explanation:
are positively charged ions form when atoms lose electrons
Answers
Answer: Atoms that lose electrons acquire a positive charge as a result because they are left with fewer negatively charged electrons to balance the positive charges of the protons in the nucleus. Positively charged ions are called cations. Most metals become cations when they make ionic compounds.
Explanation: hope this helps