PLEASE ANSWER WITH ACTUAL ANSWER AND I WILL MARK BRAINLIEST (IF YOU GIVE ME A SCAMMY ANSWER I WILL REPORT YOU!!!)
A student wants to determine the local value of the gravitational field strength, g , in their classroom. Which of the following experimental set-ups would allow a student to calculate the magnitude of the gravitational field strength using only the quantities measured?
Select TWO answers.
A: Run a lab cart down an inclined plane; measure the length of the ramp and the time it takes the cart to reach the bottom.
B: Hang a known mass from a spring scale; measure the spring scale reading when the mass is at rest.
C: Accelerate a lab cart horizontally; measure the mass of the cart and its acceleration.
D: Drop a heavy metal ball; measure the drop height and the time it takes the ball to hit the ground.
Answers
Answer:
Most likely (B)
Explanation:
B in the passage is the most representative out of all your choices and it has evidence from the passage
Hope dis helps Jit!
Sorry i forgot to type C
B and C both measure mass while the others are calculations and are bias
The following experimental set-ups would allow a student to calculate the magnitude of the gravitational field strength using only the quantities measured:
Hang a known mass from a spring scale; measure the spring scale reading when the mass is at rest.Drop a heavy metal ball; measure the drop height and the time it takes the ball to hit the ground.What is gravitational field?A gravitational field is a model used in physics to explain the effects that a large thing has on the area surrounding it, exerting a force on smaller, less massive bodies.
When a known mass from a spring scale is hung; by e; measuring the spring scale reading when the mass is at rest, the magnitude of the gravitational field strength ( reading/mass) can be calculated.
When a heavy metal ball is dropped, by measuring e the drop height and the time it takes the ball to hit the ground, the magnitude of the gravitational field strength ( h = gt²/2) can be calculated. Hence, option (B) and option (D) is correct.
Learn more about gravitational field here:
https://brainly.com/question/26690770
#SPJ2
Related Questions
Light of wavelength 656 nm and 410 nm emitted from a hot gas of hydrogen atoms strikes a grating with 5300 lines per centimeter. a) Determine the angular deflection of both wavelengths in the 1st and 2nd order.
Answers
Answer:
[tex]20.32^{\circ}[/tex] and [tex]44.08^{\circ}[/tex]
[tex]12.56^{\circ}[/tex] and [tex]25.77^{\circ}[/tex]
Explanation:
[tex]\lambda[/tex] = Wavelength
[tex]\theta[/tex] = Angle
m = Order
Distance between grating is given by
[tex]d=\dfrac{1}{5300}\\\Rightarrow d=0.0001886\ \text{cm}[/tex]
[tex]\lambda=656\ \text{nm}[/tex]
We have the relation
[tex]d\sin\theta=m\lambda\\\Rightarrow \theta=\sin^{-1}\dfrac{m\lambda}{d}[/tex]
m = 1
[tex]\theta=\sin^{-1}\dfrac{1\times 656\times 10^{-9}}{0.0001886\times 10^{-2}}\\\Rightarrow \theta=20.35^{\circ}[/tex]
m = 2
[tex]\theta=\sin^{-1}\dfrac{2\times 656\times 10^{-9}}{0.0001886\times 10^{-2}}\\\Rightarrow \theta=44.08^{\circ}[/tex]
The first and second order angular deflection is [tex]20.32^{\circ}[/tex] and [tex]44.08^{\circ}[/tex]
[tex]\lambda=410\ \text{nm}[/tex]
m = 1
[tex]\theta=\sin^{-1}\dfrac{1\times 410\times 10^{-9}}{0.0001886\times 10^{-2}}\\\Rightarrow \theta=12.56^{\circ}[/tex]
m = 2
[tex]\theta=\sin^{-1}\dfrac{2\times 410\times 10^{-9}}{0.0001886\times 10^{-2}}\\\Rightarrow \theta=25.77^{\circ}[/tex]
The first and second order angular deflection is [tex]12.56^{\circ}[/tex] and [tex]25.77^{\circ}[/tex].
The magnitude of the force can be determined as?
Answers
Answer:
the mass of the object multiplied by the acceleration of the object
Explanation:
N2L states that F = ma (force equals mass times acceleration).
To apply Problem-Solving Strategy 12.2 Sound intensity. You are trying to overhear a most interesting conversation, but from your distance of 10.0 m , it sounds like only an average whisper of 20.0 dB . So you decide to move closer to give the conversation a sound level of 60.0 dB instead. How close should you come
Answers
Answer:
r₂ = 0.316 m
Explanation:
The sound level is expressed in decibels, therefore let's find the intensity for the new location
β = 10 log [tex]\frac{I}{I_o}[/tex]
let's write this expression for our case
β₁ = 10 log \frac{I_1}{I_o}
β₂ = 10 log \frac{I_2}{I_o}
β₂ -β₁ = 10 ( [tex]log \frac{I_2}{I_o} - log \frac{I_1}{I_o}[/tex])
β₂ - β₁ = 10 [tex]log \frac{I_2}{I_1}[/tex]
log \frac{I_2}{I_1} = [tex]\frac{60 - 20}{10}[/tex] = 3
[tex]\frac{I_2}{I_1}[/tex] = 10³
I₂ = 10³ I₁
having the relationship between the intensities, we can use the definition of intensity which is the power per unit area
I = P / A
P = I A
the area is of a sphere
A = 4π r²
the power of the sound does not change, so we can write it for the two points
P = I₁ A₁ = I₂ A₂
I₁ r₁² = I₂ r₂²
we substitute the ratio of intensities
I₁ r₁² = (10³ I₁ ) r₂²
r₁² = 10³ r₂²
r₂ = r₁ / √10³
we calculate
r₂ = [tex]\frac{10.0}{\sqrt{10^3} }[/tex]
r₂ = 0.316 m
When you look at the backside of a shiny teaspoon held at arm's length, do you see yourself upright or upside down? (b) When you look at the other side of the spoon, do you see yourself upright or upside down? Assume in both cases that the distance between you and the spoon is greater than the focal length of the spoon.
Answers
Answer:
a) The back spoon gives a right image (upright)
b) the front gives an inverted image
Explanation:
The spoon is a curved metallic object, when we see ourselves from the back we have a convex mirror, in this type of mirror when the law of reflection is applied the rays diverge therefore the eye-brain system forms the image with the prolongation of the rays, therefore the image is straight and smaller than the object.
When we look through the deep side of the spoon, we have a concave mirror and as the object (we) is further away than the distance, the rays converge to a point, so the image is real, inverted smaller than the object.
In summary.
a) The back spoon gives a right image (upright)
b) the front gives an inverted image
would it be m/s or kg?
Answers
Answer:
m.s
Explanation:
Only one setup below will light the bulb. Which setup will light the bulb?
Answers
Answer:
A. it's got everything set.... correct connection
The setup that will light the bulb in the given different circuit diagram is circuit A, because it is the only circuit is that is closed.
What is a closed circuit?A complete circuit or closed circuit is the circuit that will allow the flow of electric current through it.
When a circuit is closed or complete, the connection of the different components of the circuit is complete.
From the image given, only option A has complete connection of different components of the circuit.
Thus, the setup that will light the bulb in the given different circuit diagram is circuit A, because it is the only circuit is that is closed.
Learn more about closed circuit here: https://brainly.com/question/17707076
Which two chemical equations show double-replacement reactions?
A. C+02 - CO2
B. 2Li + CaCl2 - 2LiCl + Ca
I C. Ca(OH)2 + H2S04 - CaSO4 + 2H20
D. Na2CO3 + H2S - H2CO3 + Na2S
Answers
The two chemical equations show double-replacement reactions are Ca(OH)2 + H2S04 - CaSO4 + 2H20 and Na2CO3 + H2S - H2CO3 + Na2S.
What is double replacement reaction?A double replacement reaction have two ionic compounds that are exchanging anions or cations.
From the given options, we can choose the following based on their exchange of anions or cations.
Ca(OH)2 + H2S04 - CaSO4 + 2H20Na2CO3 + H2S - H2CO3 + Na2SThus, the two chemical equations show double-replacement reactions are Ca(OH)2 + H2S04 - CaSO4 + 2H20 and Na2CO3 + H2S - H2CO3 + Na2S.
Learn more about double replacement reaction here: https://brainly.com/question/14281077
#SPJ2
A uniform magnetic field is in the positive z direction. A positively charged particle is moving in the positive x direction through the field. The net force on the particle can be made zero by applying an electric field in what direction
Answers
Answer:
We apply an electric field in the negative y direction
Explanation:
Since A uniform magnetic field is in the positive z direction and A positively charged particle is moving in the positive x direction through the field, the magnetic force acting on the positively charged particle is in the positive y direction according to Fleming's right-hand rule.
For the net force on the particle to be zero, we apply an electric field in the negative y direction to create an electric force on the positively charged particle, so as to cancel out the magnetic force.
A wooden cylinder (in the form of a thin disk) of uniform density and a steel hoop are set side by side, released from rest at the same moment, and roll down an inclined plane towards a wall at the bottom. The cylinder has a larger radius than the hoop, but the hoop weighs more than the cylinder.
Required:
Who reaches the bottom first and why?
Answers
Answer:
a. The wooden cylinder b. the wooden cylinder reaches the bottom first because its translational kinetic energy is greater.
Explanation:
a. Who reaches the bottom first
The kinetic energy of the objects is given by
K = 1/2mv² + 1/2Iω² where m = mass of object, v = velocity of object, I = moment of inertia and ω = angular velocity = v/r where r = radius of object
For the wooden cylinder, I = mr²/2 where m = mass of wooden cylinder and r = radius of wooden cylinder and v = velocity of wooden cylinder
So, its kinetic energy, K = 1/2mv² + 1/2(mr²/2)(v/r)²
K = 1/2mv² + 1/4mv²
K = 3mv²/4
For the steel hoop, I' = mr'² where m' = mass of steel hoop and r' = radius of steel hoop and v' = velocity of steel hoop
So, its kinetic energy, K' = 1/2m'v'² + 1/2(m'r'²)(v'/r')²
K' = 1/2m'v'² + 1/2m'v'²
K' = m'v'²
Since both kinetic energies are the same, since the drop from the same height,
K = K'
3mv²/4 = m'v'²
v²/v'² = 4m/3m'
v²/v'² = 4/3(m/m')
v/v' = √[4/3(m/m')]
Since the hoop weighs more than the cylinder m/m' < 1 and 4/3(m/m') < 4/3 ⇒ √ [4/3(m/m')] < √4/3 ⇒ v/v' < 1.16 ⇒ v'/v > 1/1.16 ⇒ v'/v > 0.866. Since 0.866 < 1, it implies v' < v.
Since v' = speed of steel hoop < v = speed of wooden cylinder, the wooden cylinder reaches the bottom first.
b. Why
Since the kinetic energy, K = translational + rotational
We find the translational kinetic energy of each object.
For the wooden cylinder,
K = K₀ + 1/2Iω² where K₀ = translational kinetic energy of wooden cylinder
K - 1/2Iω² = K₀
3/4mv² - 1/2(mr²/2)(v/r)² = K₀
3/4mv² - 1/4mv² = K₀
K₀ = 1/2mv²
For the steel hoop,
K' = K₁ + 1/2I'ω'² where K₁ = translational kinetic energy of steel hoop
K' - 1/2I'ω'² = K₁
m'v'² - 1/2(m'r'²)(v'/r')² = K₁
m'v'² - 1/2m'v'² = K₁
K₁ = 1/2m'v'²
So, K₀/K₁ = 1/2mv²÷1/2m'v'² = mv²/m'v'² = (m/m')(v²/v'²) = (m/m')4/3(m/m') = 4/3(m/m')².
Since (m/m') < 1 ⇒ (m/m')² < 1 ⇒ 4/3(m/m')² < 4/3 ⇒ K₀/K₁ < 1.33 ⇒ K₀ > K₁
So, the kinetic energy of the wooden cylinder is greater than that of the steel hoop.
So, the wooden cylinder reaches the bottom first because its translational kinetic energy is greater.
a. The wooden cylinder b. the wooden cylinder reaches the bottom first because its translational kinetic energy is greater.
What is Kinetic energy?
The energy of the body due to its movement in a particular direction under the influence of a force like a free-falling body due to gravitaional force is called Kinetic energy.
The kinetic energy of the objects is given by
[tex]K = \dfrac{1}{2}mv^2 + \dfrac{1}{2}Iw^2[/tex]
where
m = mass of object,
v = velocity of object,
I = moment of inertia and
ω = angular velocity = v/r where r = radius of object
For the wooden cylinder, I = mr²/2 where m = mass of wooden cylinder and r = radius of wooden cylinder and v = velocity of wooden cylinder
So, its kinetic energy,
[tex]K = \dfrac{1}{2}mv^2 + \dfrac{1}{2}(\dfrac{mr^2}{2})\dfrac{v}{r}^2[/tex]
[tex]K = \dfrac{3mv^2}{4}[/tex]
For the steel hoop,
I' = mr'²
where
m' = mass of steel hoop and
r' = radius of steel hoop and
v' = velocity of steel hoop
So, its kinetic energy,
[tex]K' = \dfrac{1}{2}m'v'^2 + \dfrac{1}{2}(m'r'^2)\dfrac{v'}{r'}^2[/tex]
[tex]K' = \dfrac{1}{2}m'v'^2 + \dfrac{1}{2}m'v'^2[/tex]
K' = m'v'²
Since both kinetic energies are the same, since the drop from the same height,
K = K'
[tex]\dfrac{3mv^2}{4 }= m'v'^2[/tex]
[tex]\dfrac{v^2}{v'^2} =\dfrac{ 4m}{3m'}[/tex]
[tex]\dfrac{v^2}{v'^2} = \dfrac{4}{3}(\dfrac{m}{m'})[/tex]
[tex]\dfrac{v}{v'} = \sqrt{[\dfrac{4}{3}(\dfrac{m}{m'})][/tex]
Since the hoop weighs more than the cylinder m/m' < 1 and 4/3(m/m') < 4/3 ⇒ √ [4/3(m/m')] < √4/3 ⇒ v/v' < 1.16 ⇒ v'/v > 1/1.16 ⇒ v'/v > 0.866. Since 0.866 < 1, it implies v' < v.
Since v' = speed of steel hoop < v = speed of wooden cylinder, the wooden cylinder reaches the bottom first.
(b) Since the kinetic energy, K = translational + rotational
We find the translational kinetic energy of each object.
For the wooden cylinder,
[tex]K = K_o + \dfrac{1}{2}Iw^2[/tex]
where
K₀ = translational kinetic energy of wooden cylinder
[tex]K - \dfrac{1}{2}Iw^2 = K_o[/tex]
[tex]\dfrac{3}{4}mv^2 - \dfrac{1}{2}(\dfrac{mr^2}{2})(\dfrac{v}{r})^2 = K_a[/tex]
[tex]\dfrac{3}{4}mv^2 - \dfrac{1}{4}mv^2 = K_o[/tex]
[tex]K_o = \dfrac{1}{2}mv^2[/tex]
For the steel hoop,
[tex]K' = K_1 + \dfrac{1}{2}I'w'^2[/tex]
where
K₁ = translational kinetic energy of steel hoop
[tex]K' - \dfrac{1}{2}I'w'^2 = K_1[/tex]
[tex]m'v'^2 - \dfrac{1}{2}(m'r'^2)(\dfrac{v'}{r'})^2 = K_1[/tex]
[tex]m'v'^2 - \dfrac{1}{2}m'v'^2 = K_1[/tex]
[tex]K_1= \dfrac{1}{2}m'v'^2[/tex]
So, K₀/K₁ = 1/2mv²÷1/2m'v'² = mv²/m'v'² = (m/m')(v²/v'²) = (m/m')4/3(m/m') = 4/3(m/m')².
Since (m/m') < 1 ⇒ (m/m')² < 1 ⇒ 4/3(m/m')² < 4/3 ⇒ K₀/K₁ < 1.33 ⇒ K₀ > K₁
So, the kinetic energy of the wooden cylinder is greater than that of the steel hoop.
So, the wooden cylinder reaches the bottom first because its translational kinetic energy is greater.
To know more about Kinetic energy follow
https://brainly.com/question/25959744
A horizontal 2.00\ m2.00 m long, 5.00\ kg5.00 kg uniform beam that lies along the east-west direction is acted on by two forces. At the east end of the beam, a 200\ N200 N forces pushes downward. At the west end of the beam, a 200\ N200 N force pushed upward. What is the angular acceleration of the beam
Answers
Answer: [tex]240\ rad/s^2[/tex]
Explanation:
Given
Length of beam [tex]l=2\ m[/tex]
mass of beam [tex]m=5\ kg[/tex]
Two forces of equal intensity acted in the opposite direction, therefore, they create a torque of magnitude
[tex]\tau =F\times l=200\times 2=400\ N.m[/tex]
Also, the beam starts rotating about its center
So, the moment of inertia of the beam is
[tex]I=\dfrac{ml^2}{12}=\dfrac{5\times 2^2}{12}\\\\I=\dfrac{5}{3}\ kg.m^2[/tex]
Torque is the product of moment of inertia and angular acceleration
[tex]\Rightarrow \tau=I\alpha\\\\\Rightarrow 400=\dfrac{5}{3}\times \alpha\\\\\Rightarrow \alpha =240\ rad/s^2[/tex]
Your boss asks you to design a drone that begins its flight near the surface and rises to 9600 m. At the surface it will fly through air having a density of 1.23 kg per cubic meter and at its highest altitude the air density will become 0.62 kg per cubic meter. If the flight velocity near sea level is 45 mph, then how fast will in need to go at its highest altitude to maintain the same lift. Assume the coefficient of lift remains constant.
Answers
Answer:
[tex]63.38\ \text{mph}[/tex]
Explanation:
L = Lift force
[tex]\rho[/tex] = Density of air
A = Surface area
v = Velocity
[tex]v_1[/tex] = 45 mph
[tex]\rho_1=1.23\ \text{kg/m}^3[/tex]
[tex]\rho_2=0.62\ \text{kg/m}^3[/tex]
Coefficient of lift is given by
[tex]CL=\dfrac{2L}{\rho v^2A}\\\Rightarrow \rho=\dfrac{2L}{CL v^2A}[/tex]
So
[tex]\rho\propto \dfrac{1}{v^2}[/tex]
[tex]\dfrac{\rho_1}{\rho_2}=\dfrac{v_2^2}{v_1^2}\\\Rightarrow v_2=\sqrt{\dfrac{\rho_1}{\rho_2}}\times v_1\\\Rightarrow v_2=\sqrt{\dfrac{1.23}{0.62}}\times 45\\\Rightarrow v_2=63.38\ \text{mph}[/tex]
The velocity at the required altitude should be [tex]63.38\ \text{mph}[/tex] to maintain the same lift.
What voltage would be measured across the 15 ohm resistor?
A)
2.5 volts
B)
5.0 volts
C)
7.5 volts
D)
10 volts
Answers
Answer:
7.5 volts
Explanation:
I did it on USA Testprep
Will give brainliest!
Describe how heat is moving in the image and label each as Radiation, Conduction, or Convection.
Radiation / Conduction / Convection
Answers
Answer:
well in the pot there is conventional heat, the pot itself is giving off conductable heat, and the radiational heat is coming from the stove.
Galvani wrongly believed that the frog’s leg twitched during his experiment due to _____.
Answers
Answer:
nerves
Explanation:
I think, I maybe wrong.
why entrepreneurs should not be a wild risk taker?
Answers
Explanation:
Entrepreneurs are not wild risk takers but are instead calculating risk takers. They appear to be risk takers because they see the market differently than the rest of us do. 3. ... Entrepreneurs tend to be optimistic about their chances for success, and usually their optimism is based in reality.
A +3.4 x 10-6 C test charge experiences forces from two other nearby charges: a 3 N force due east and a 15 N force due west. What are the magnitude and direction of the electric field st the location of the test charge?
Answers
Answer:
3.53×10⁶ N/c due west
Explanation:
From the question
E = F'/q........................ Equation 1
Where E = Electric Field, F = Net Force, q = Charge.
But,
F' = F₂-F₁...................... Equation 2
Substitute equation 2 into equation 1
E = (F₂-F₁)/q................ Equation 3
Given: F₁ = 3 N due east, F₂ = 15 N due west, q = 3.4×10⁻⁶ C
Substitute these values into equation 1
E = (15-3)/(3.4×10⁻⁶)
E = 12/(3.4×10⁻⁶)
E = 3.53×10⁶ N/c due west
You are testing a new amusement park roller coaster with an empty car with a mass of 130 kg . One part of the track is a vertical loop with a radius of 12.0 m . At the bottom of the loop (point A) the car has a speed of 25.0 m/s and at the top of the loop (point B) it has speed of 8.00 m/s . Part A As the car rolls from point A to point B, how much work is done by friction
Answers
Answer:
work done by friction = 5889 J
Explanation:
We are given;
Mass of car; m = 130 kg
Speed at point A; v1 = 25 m/s
Speed at point B: v2 = 8 m/s
Since radius is 12 m
At point A, distance is; y1 = 12 m
At point B, distance is; y2 = -12 m
Now, formula for work done by all the forces is given by the equation;
Total work;
W_gravity + W_others = K2 - K1
Where W_others is work done by other forces which is equal to work done by friction
Where K2 - K1 is change in kinetic energy.
W_grav is also change in potential energy and is expressed as;
W_grav = mgy1 - mgy2
K2 - K1 = ½m(v1)² - ½m(v2)²
Thus;
mgy1 - mgy2 + W_others = ½m(v1)² - ½m(v2)²
Making W_others the subject;
W_others = ½m(v1)² - ½m(v2)² + mgy2 - mgy1
Plugging in the relevant values;
W_others = (½ × 130 × 25²) - (½ × 130 × 8²) + (130 × 9.8 × -12) - (130 × 9.8 × 12)
W_others = 5889 J
Recall that I earlier said W_others = work done by friction.
Thus, work done by friction = 5889 J
Irrigation channels that require regular flow monitoring are often equipped with electromagnetic flowmeters in which the magnetic field is produced by horizontal coils embedded in the bottom of the channel. A particular coil has 100 turns and a diameter of 6.0 m. When it's time for a measurement, a 4.5 A current is turned on. The large diameter of the coil means that the field in the water flowing directly above the center of the coil is approximately equal to the field in the center of the coil. The field is directed downward and the water is flowing east. The water is flowing above the center of the coil at 1.5 m/s
Required:
a. What is the magnitude of the field at the center of the coil?
b. What is the direction of the force on a positive ion in the water above the center of the coil?
Answers
Answer:
A) B = 9.425 × 10^(-5) T
B) North direction
Explanation:
A) We are given;
Current in coil; I = 4.5 A
Number of turns; N = 100 turns
Radius;R = diameter/2 = 6/2 = 3 m
Formula for the magnetic field at the center of the coil is given by;
B = (μ_o•N•I)/2R
Where μ_o is a constant = 4π × 10^(-7) H/m
Thus;
B = (4π × 10^(-7) × 100 × 4.5)/(2 × 3)
B = 9.425 × 10^(-5) T
B) The direction of the force on a positive ion in water can be gotten by the application of flemmings right hand rule.
From flemmings right hand rule, we know that;
- The thumb indicates the direction of the motion of the force which is in the north direction.
- The Index finger indicates the direction of the magnetic field which is in the east direction
- The middle finger indicates the direction of magnetic field which is downwards in the west direction.
Therefore, the direction of the force as seen from flemmings right hand rule is in the north direction
In an application, Germanium is
made p-type material by adding
Indium. The rate of adding is one
indium atom
per
3 Germanium
atom. Assume donor density to be
zero and ni = 6.2 Cubic
metre at room temperature.
Determine the value
of
the
aceeptor atom density
Answers
Answer:
produce electronics
Explanation:
The uses of Germanium are recorded beneath: Germanium's principle use is to deliver strong state hardware, semiconductors and fiber optic frameworks. As a phosphor in fluorescent lights.
The Brazilian rain forest is an area with significant biodiversity. As the rain forest is replaced with agricultural land, it is reasonable to predict a reduction in -
Answers-
A: consumption of solar energy.
B: sustainability over time.
C: precipitation levels.
D: average daily temperature.
Answers
Answer:
Bb
Explanation:
The graph shows the heating curve of water the X axis shows heat added overtime and Y axis shows the temperature identify the regions were liquid water is present
Answers
Answer:
liquid, solid, and gas. A heating curve shows how the temperature changes as a substance is heated up at a constant rate.
Explanation:
liquid is often the bridge between solid and gas
not always, but most times.
For water, liquid water would probably be at temperature Y= 32- 212 degrees F, or Y= 0-100 degrees C.
Apologies, I hope this helps.
A cars engine can deliver 300,000 watts of power to its wheels.
A. If the engine acts for 6 seconds, what is the work done on the car?
B. If the car travels 0.25 miles, what force acted on the car?
C.If the cars mass is 1200 kg, what is the acceleration of the car?
Answers
Answer:
A. 1,800,000 J
B. 4473.87 N
C. 3.728 m/s²
What happens to a light wave that is absorbed by matter
Answers
Answer:
In absorption, the frequency of the incoming light wave is at or near the energy levels of the electrons in the matter. The electrons will absorb the energy of the light wave and change their energy state.
Explanation:
one negative change you may encounter as a student or an employee
Answers
Answer:
you may get bullied or teased for being a differrent race, ethnic.
Answer:
Workload
Explanation:
You may feel stressed about a heavier workload or more too do. You will also be paid as an employee unlike, a student.
Help me please it’s due right now review question help
Answers
Answer:
M.E = mgh
given, m=400g = 400/1000=0.4kg
h=1.75m
g=9.81m/s²
M.E =0.4×9.81×1.75
=6.867J
Someone help me like please thank you
Answers
They are both going the same speed, but the truck is bigger and heavier. The more mass an object has, the more kinetic energy it has. There is more mass being moved, so it makes more kinetic energy. The car does not have as much mass, so it makes less kinetic energy compared to the truck.
Good luck with the rest of your test or quiz :)
if 400g is 1kg find the ratio in the simplest form
Answers
2:5
Explanation:
400g : 1kg
400g: 1000g
4 : 10
2 : 5
Review please help.
Answers
Answer:
1 and 3
Explanation:
because they are going up from 0
need help ASAP!!!!!!!!!!!
Answers
Answer:
The equation says that due to variation in temperature is
delt T = .59 m/s / C = 16 C * .59 m/s = 9.44 m/s
So v = 332 m/s + 9.44 m/s = 341 m/s (to three significant figures)
A substance whose shape can easily change is a