Gerald's science teacher mixed liquid X and liquid Y, both at room-temperature, in a large beaker. two beakers of clear solutions to the left of a right-pointed arrow, and a large beaker with a clear solution to the right of the arrow The mixture in the large beaker still looked clear like water, but when the students, one at a time, carefully touched the outside of the large beaker, it felt warm to the touch. Why did the large beaker most likely feel warm? A. The two liquids were not soluble in water. B. The release of a gas heated the solution. C. A chemical reaction produced a new substance. D. The energy of mixing warmed the liquids.

Answer:

According to Boyle's Law, an inverse relationship exists between pressure and volume. Boyle's Law holds true only if the number of molecules (n) and the temperature (T) are both constant.

Answer:

A and C

Explanation:

DNA is what makes up you and me and DNA is composed of four bases adenine, guanine, thymine, and cytosine. The others are not true.

Answer:

[tex]K^{+}[/tex] and [tex]NO_{3}^{-}[/tex]

Explanation:

The equation for the reaction is AgNO3(aq) + KCl(aq) ==> AgCl(s) + KNO3(aq)

With all the ions, it is

[tex]Ag^{+}[/tex](aq) + [tex]NO_{3} ^{-}[/tex](aq) + [tex]K^{+}[/tex](aq) + [tex]Cl^{-}[/tex](aq)  ==> AgCl(s) +

[tex]K^{+}[/tex] and [tex]NO_{3} ^{-}[/tex] do not change, so they are the spectator ions and are removed

The ionic equation is:

[tex]Ag^{+}[/tex](aq) + [tex]Cl^{-}[/tex](aq) ==> AgCl(s)

Answer:

I think B

Explanation:

Red litmus paper is used more to find bases, blue litmus paper changes better when coming to find acids. So I believe it is B

The best approach best investigate whether substances are basic is to test each substance with red litmus paper.

Basic compounds are those which have a pH value in between the range of 7.1 to 14.

Red litmus paper changes its color from red to blue when comes in the contact of basic compounds. So to check the basicity of household substance we should use red litmus paper.

Hence test each substance with red litmus paper.

To know more about basic compounds, visit the below link:
https://brainly.com/question/14666717

Answer:

a beam of electrons emitted from the cathode of a high-vacuum tube.

Explanation:

Cathode rays (also known as electron beam or e-beam) are electron waves that can be used in vacuum tubes.

Explanation:

seaborgium Is a type of corn that is grown in warm countries.

answer is SG

Answer:

269 u

Explanation:

Jet streams can cause warmer air temperatures on coastal land areas when the tide changes direction.

Jet streams are short bands of high wind that travel across the globe from west to east.

On earth, the location of the jet stream is in the latitude of the tropopause.

Two polar jet streams are present near the north and south poles.

Two subtropical jet streams are present, closer to the equator,

These make the Earth's four principal jet streams.

Thus, the correct option is C.

Learn more about jet streams

https://brainly.com/question/861519

Answer: White bread

Explanation:

Answer:

It is proved that sin20=2sin0.cos0

Explanation:

Given

[tex]0=30[/tex] °

[tex]sin20=2sin0.cos0[/tex]

Substituting the value of "0" on both the sides, we get -

[tex]sin2 (30) =2sin 30 * cos 30\\sin 60 = 2 * sin 30 * cos 30 \\0.866 = 2 * 0.5 * 0.866\\0.866 = 0.866[/tex]

Since LHS = RHS

we can say that [tex]sin20=2sin0.cos0[/tex]

Answer:

nitrogen

Explanation:

Answer:

Kim:

Wendell:

Gonzalo:

Explanation:

did it on Edge.

Answer:

D

Explanation:

With the collision, obviously Ball 2's velocity increased, while Ball 1 slowed down a little bit due to the impact. This decrease in velocity caused a decrease in Ball 1's Momentum. Satisfying both conditions, option D is right.

Answer:

Mass of truck = 29.62 kg (Approx.)

Explanation:

Given:

Kinetic energy = 1200 J

Speed of truck = 9 m/s

Find:

Mass

Computation:

The kinetic energy of a thing is the force that has attributable to its movement in physics.

Kinetic energy = [1/2][m][v]²

1,200 = [1/2][m][9]²

1,200 = [1/2][m][81]

Mass of truck = 29.62 kg (Approx.)

Answer:

A) 122 atm

Explanation:

PV = nRT

Solve for P --> P = nRT/V

n = 10.0 mol + 5.0 mol = 15.0 mol

R = 0.08206 L atm / mol K

T = 25 + 273 = 298 K

V = 3.0

P = (15.0)(0.08206)(298) / (3.0) = 122 atm

Answer: 46.66 Grams

Explanation:

Credits to jasminealexismacias, Enjoy your CK12

Answer:

1. Compress.

2. Fixed.

3. Melts.

4. Melting point.

5. Freezing point.

6. High.

7. Crystalline.

8. Lattice.

9. Unit cell.

10. Amorphous.

Explanation:

In science, matter can be defined as anything that has mass and occupies space. Any physical object that is found on earth is typically composed of matter. Matter are known to be made up of atoms and as a result has the property of existing in states.

Generally, matter exists in three (3) distinct or classical phases and these are;

1. Gas: it is the state of matter in which the physical substance has no definite shape or volume and as a result fills all available space. Also, gases are easily compressible and can flow. Examples of gases are hydrogen, oxygen, argon, nitrogen etc.

2. Liquid: it is the state of matter in which the physical substance can be poured and it takes the shape of its container. Also, liquids generally have a definite volume. Examples of liquids are urine, water, milk, blood etc.

3. Solid: it is the state of matter in which the physical substance has a definite shape and fixed volume but not compressible. Examples of solids are pen, screwdriver, television, car etc.

Filling the missing words (texts) of the question, we have;

Solids tend to be dense and difficult to compress. They do not flow or take the shape of their containers, like liquids do, because the particles in solids vibrate around fixed points. When a solid is heated until its particles vibrate so rapidly that they are no longer held in fixed positions, the solid melts. The melting point is the temperature at which a solid changes to a liquid. The melting and freezing point of a substance are at the same temperature. In general, ionic solids tend to have relatively high melting points, while molecular solids tend to have relatively low melting points. Most solids are crystalline. The particles are arranged in a pattern known as a crystal lattice. The smallest subunit of a crystal lattice is the unit cell. Some solids lack an ordered internal structure and are called amorphous solids.

Answer:  fuel and oxygen are reactants.

Explanation:

Answer:

fuel and oxygen

Explanation:

I take test

Answer:

The volume of 5.0 g CO2 is 2.6 L CO2 at STP.

Explanation:

hope this helps :)

Answer:

Yes.

Explanation:

Birds don't look much like humans on the outside. As you might expect, their insides are also different, even though their internal organs carry out the same basic functions human organs carry out.

Answer:

See explanation

Explanation:

The use of Uranium - 234 to generate electricity depends on a fission reaction. The uranium nuclide is bombarded by fast moving neutrons leading to a chain reaction. Control rods and moderators are used to keep the nuclear reaction under control.

As the nuclear reaction proceeds, heat is generated and steam is consequently produced. This steam is used to turn a turbine and electricity is thereby generated.

Answer:

I believe the volume should increase.

Answer:

As we know that

At STP

1 mole of any gas occupies 22.4L  

so

15.7L / 22.4L/mole = 0.7moles Cl2  

0.7moles x 6.022x10^23molecules/mole = 4.22x10^23molecules

hope it helps

Answer:

If the choices were coal, petroleum, and natural gas, I would say that petroleum has the greatest impact on the CO₂ levels in the atmosphere. I chose petroleum because of transportation, such as cars, trucks, planes, and more.

Answer:

[tex]\boxed {\boxed {\sf molarity = 0.17 \ M \ C_6H_12O_6}}[/tex]

Explanation:

Molarity is found by dividing the moles of solute by liters of solution.

[tex]molarity = \frac {moles}{liters}[/tex]

We are given grams of a compound and milliliters of solution, so we must make 2 conversions.

1. Gram to Moles

We must use the molar mass. First, use the Periodic Table to find the molar masses of the individual elements.

Next, look at the formula and note the subscripts. This tells us the number of atoms in 1 molecule. We multiply the molar mass of each element by its subscript.

6(12.011)+12(1.008)+6(15.999)=180.156 g/mol

Use this number as a ratio.

[tex]\frac {180.156 \ g\ C_6H_12 O_6}{ 1 \ mol \ C_6H_12O_6}[/tex]

Multiply by the given number of grams.

[tex]78 \ g \ C_6H_12O_6 *\frac {180.156 \ g\ C_6H_12 O_6}{ 1 \ mol \ C_6H_12O_6}[/tex]

Flip the fraction and divide.

[tex]78 \ g \ C_6H_12O_6 *\frac { 1 \ mol \ C_6H_12O_6}{180.156 \ g\ C_6H_12 O_6}[/tex]

[tex]\frac { 78 \ mol \ C_6H_12O_6}{180.156 }= 0.432958102977 \ mol \ C_6H_12O_6[/tex]

2. Milliliters to Liters

There are 1000 milliliters in 1 liter.

[tex]\frac {1 \ L }{ 1000 \ mL}[/tex]

Multiply by 2500 mL.

[tex]2500 \ mL* \frac {1 \ L }{ 1000 \ mL}[/tex]

[tex]2500 * \frac {1 \ L }{ 1000 }= 2.5 \ L[/tex]

3. Calculate Molarity

Finally, divide the moles by the liters.

[tex]molarity = \frac {0.432958102977 \ mol \ C_6H_12O_6}{ 2.5 \ L}[/tex]

[tex]molarity = 0.173183241191 \ mol \ C_6H_12O_6/L[/tex]

The original measurement has 2 significant figures, so our answer must have the same. That is the hundredth place and the 3 tells us to leave the 7.

[tex]molarity \approx 0.17 \ mol \ C_6H_12O_6 /L[/tex]

1 mole per liter is also equal to 1 M.

[tex]molarity = 0.17 \ M \ C_6H_12O_6[/tex]

Answer:

( j ) should be the correct option because atomic number of fluorine is 9 so, no. of electrons and protons should be same I.e. 9