Answer: [tex][H^+][/tex] of 0.056 M HF solution is [tex]8.96\times 10^{-5}[/tex]
Explanation:
[tex]HF\rightarrow H^+F^-[/tex]
cM 0 0
[tex]c-c\alpha[/tex] [tex]c\alpha[/tex] [tex]c\alpha[/tex]
So dissociation constant will be:
[tex]K_a=\frac{(c\alpha)^{2}}{c-c\alpha}[/tex]
Give c= 0.056 M and [tex]\alpha[/tex] = ?
[tex]K_a=1.45\times 10^{-7}[/tex]
Putting in the values we get:
[tex]1.45\times 10^{-7}=\frac{(0.056\times \alpha)^2}{(0.056-0.056\times \alpha)}[/tex]
[tex](\alpha)=0.0016[/tex]
[tex][H^+]=c\times \alpha[/tex]
[tex][H^+]=0.056\times 0.0016=8.96\times 10^{-5}[/tex]
Thus [tex][H^+][/tex] of 0.056 M HF solution is [tex]8.96\times 10^{-5}[/tex]
What is the process of splitting into two cells called?
explain why it is important to eat the wet sand before heating the iron wool
Answer:
huh,eat wet sand b4heating iron wool??
What is the relationship between the valence electrons of an atom and the chemical bonds the atom can form?
Answer:
Valence electrons are outer shell electrons with an atom and can participate in the formation of chemical bonds. In single covalent bonds, typically both atoms in the bond contribute one valence electron in order to form a shared pair. The ground state of an atom is the lowest energy state of the atom.
What number and types of atoms occur in a formula unit of
Ca(NO3),?
Answer:
help with mine ill help with yours
Answer:
1 calcium atom, 2 nitrogen atoms, and there are 6 oxygen atoms
Explanation:
What are several ways that humans destroy an ecosystem?
Answer:
Some human activities that cause damage (either directly or indirectly) to the environment on a global scale include population growth, overconsumption, overexploitation, pollution, and deforestation, to name but a few.
Explanation:
Hope this helped!!!
What is the oxidation state of copper in Cu(C2H3O2)2? +2 -1 -2 +4 +1
In the following reaction, the partial
pressure at equilibrium for each of the
products, CO and water vapor at 990°
C, is 11.0 atm and the partial pressure
for each of the reactants, H2 and CO2,
at equilibrium is 8.70 atm. What is Kp?
H2(g) + CO2(g) + H2O(g) + CO(g)
Kp = [?]
Answer:
H2+CO2=H2O+CO
Kp=(pCO)(pH2O)/(pH2)(pCO2)
= 11×11/8.70×8.70
=1.60
What should you use to compare one substance with another substance in a reaction?
Answer:
metal or other acids
Explanation: hope u get it right
Do noble gases form bonds? Why or why not?
◕‿↼ Hey There!
Answer → Source Noble Gases have a full valence shell, which is why they rarely form bonds with other atoms.
✨ Hope This Helps!✨
NEED HELP ASAP
You need to prepare a 100. mL of a 0.050M solution of CaCl2. How many grams of CaCl2 are needed?
Answer:
9.
Explanation:
.
Define the law of conservation of charge and provide an example.
Define opposite charges attract and like charges repel and provide an example.
Define Electricity along with an example.
Answer:
Conservation of Charge is the principle that the total electric charge in an isolated system never changes. The net quantity of electric charge, the amount of positive charge minus the amount of negative charge in the universe, is always conserved.
11. Why does cotton absorb so much water?
a. Cotton is adhesive to the water molecules
b. The polarity of water allows it to dissolve cotton.
C. Cotton has hollow fibers that absorb by capillary action
d. Cotton is cohesive to the cotton fibers
Answer:
c
Explanation:
A boy is skating down the street, hits a curb, and files off the board. Why did this happened? Can y’all plz help me it’s due today!
Answer:
to much sause
Explanation:
please help me with these questions, im not understanding :(
Answer:
this is all the answers i hope you have a good day
Explanation:
may i please have a branlliests
Select which of the following is a major disadvantage of using nuclear power to generate electricity.
The power plants are inexpensive to build
A small amount of power is produced
No greenhouse gases are produced
The by-product of nuclear power is radiation
Answer:
The power plants
are inexpensive to build
How do you make the shadows of objects appear bigger on the screen
Explanation:
Indoors, you can change the size of a shadow by moving your body or the object closer to or farther from the light.
Shadows grow bigger and fuzzier as the object moves closer to the light source, and smaller and sharper as the object moves farther away.
the formulas of three important acids and three important bases and describe their uses.
Answer:
18929eu9sisjwiejwjxjjejxme
Compute the percentage of error to the nearest tenth in the student’s calculation if the actual specific heat value for aluminum is 0.9J:g*C.
Complete Question:
1. A block of aluminum with a mass of 140 g is cooled from 98.4°C to 62.2°C with a release of 4817 J of heat. From these data, calculate the specific heat of aluminum.
a. Compute the percentage of error to the nearest tenth in the student's calculation if the actual specific heat value for aluminum is 0.9 J/g°C
Answer:
Percent error = 55.56 %
Explanation:
Given the following data;
Mass = 140 grams
Initial temperature = 62.2°C
Final temperature = 98.4°C
Quantity of heat = 4817 Joules.
To find the specific heat capacity;
Heat capacity is given by the formula;
[tex] Q = mcdt[/tex]
Where;
Q represents the heat capacity or quantity of heat. m represents the mass of an object. c represents the specific heat capacity of water. dt represents the change in temperature.dt = T2- T1
dt = 98.4 - 62.2
dt = 36.2°C
Making c the subject of formula, we have;
[tex] c = \frac {Q}{mdt} [/tex]
Substituting into the equation, we have;
[tex] c = \frac {4817}{140*36.2} [/tex]
[tex] c = \frac {4817}{5068} [/tex]
Specific heat capacity, = 0.95 J/g°C
b. To find the percentage error;
Given the following data;
Actual specific heat capacity = 0.9 J/g°C
Experimental specific heat capacity = 0.95 J/g°C
Percent error can be defined as a measure of the extent to which an experimental value differs from the theoretical value.
Mathematically, it is given by this expression;
[tex] Percent \; error = \frac {experimental \;value - actual \; value}{ actual \;value} *100[/tex]
Substituting into the formula, we have;
[tex] Percent \; error = \frac {0.95 - 0.9 }{ 0.9} *100[/tex]
[tex] Percent \; error = \frac {0.5}{0.9} *100[/tex]
[tex] Percent \; error = 0.5556 *100[/tex]
Percent error = 55.56 %
3. How much energy is needed to raise 45 grams of water from 40°C to 115 °C?
The specific heat capacity of ice is 2.06 J/g °C
The specific heat capacity of water is 4.18 J/g °C
The specific heat capacity of steam is 2.02 J/g °C
The heat of fusion of water is 334 J/g
The heat of vaporization of water is 2260 J/g.
Answer:
Q = 114349.5 J
Explanation:
Hello there!
In this case, since this a problem in which we need to calculate the total heat of the described process, it turns out convenient to calculate it in three steps; the first one, associated to the heating of the liquid water from 40 °C to 100 °C, next the vaporization of liquid water to steam at constant 100 °C and finally the heating of steam from 100 °C to 115 °C. In such a way, we calculate each heat as shown below:
[tex]Q_1=45g*4.18\frac{J}{g\°C}*(100\°C-40\°C)=11286J\\\\Q_2=45g* 2260 \frac{J}{g} =101700J\\\\Q_3=45*2.02\frac{J}{g\°C}*(115\°C-100\°C)=1363.5J[/tex]
Thus, the total energy turns out to be:
[tex]Q_T=11286J+101700J+1363.5J\\\\Q_T=114349.5J[/tex]
Best regards!
find the oxidation number of hydrogen in HNC.
Answer:
+1
Explanation:
The oxidation number of Hydrogen atom is +1. As Nitrogen is more electronegative than Carbon, the oxidation number of Nitrogen is - 3. The Net charge on the compound is zero.
(hope that helps)
4. Identify What do scientists call a substance that forms during a chemical reaction?
5. Identify On what side of the equation are reactants found?
Answer:
4. Reactant
5. Left
I hope this helps ❤️❤️
How many moles of CaCO3 are needed to dissolve in 0.600 liters to make a
2.25 M solution?
A 0.267 mol
B 3.77 mol
C 1.35 mol
D 2.43 mol
Answer:
1.35 moles of CaCO₃
Explanation:
Molarity, it is a sort of concentration that indicates the amount of moles in 1 L of solution.
M = mol /L
This is a simple equation
M = 2.25 M
Our volume is 0.6L
M . L = mol
Then, 2.25 mol/L . 0.6L = 1.35 moles
We need 1.35 moles of CaCO₃
this is due in five mintues please help
Answer:
5
Explanation:
Na, N, O, O, O
A buildup of charges in an object is called
Answer:
Static Electricity
Explanation:
Answer:
static electricity
Explanation:
34.56 + 42.235 x 0.0123 – 0.001
with correct sig figs
Answer: 35.078 to 3 significant figures
Explanation:
Solving;
34.56 + 42.235 * 0.0123 - 0.001
We solve the multiplication first according to the BODMAS rule.
So,
42.235 * 0.0123 = 0.51949
Doing the addition,
34.56 + 0.51949 - 0.001
This gives;
35.079 - 0.001
And finally the subtraction gives;
= 35.078
I NEED HELP THIS IS DUE TMR!
A 124.6-g sample of copper has a volume of 14 cm. what is the density of copper?
Answer:
The density of copper is 8.9 grams per cubic centimeter.
Explanation:
There is a writing mistake in statement, correct form is written below:
A 124.6 grams sample of copper has a volume of 14 cubic centimeters. What is the density of copper?
Let suppose that mass of the copper sample is distributed uniformly in its volume, then we shall use the following definition of density ([tex]\rho[/tex]), in grams per cubic centimeter:
[tex]\rho = \frac{m}{V}[/tex] (1)
Where:
[tex]m[/tex] - Mass, in grams.
[tex]V[/tex] - Volume, in cubic centimeters.
If we know that [tex]m = 124.6\,g[/tex] and [tex]V = 14\,cm^{3}[/tex], then the density of the sample of copper is:
[tex]\rho = \frac{m}{V}[/tex]
[tex]\rho = 8.9\,\frac{g}{cm^{3}}[/tex]
The density of copper is 8.9 grams per cubic centimeter.
50 POINTS PLEASE ANSWER CORRECTLY
What happens to the momentum of two cars when they collide?
A. The total momentum after the collision increases.
B. The total momentum after the collision decreases.
C. The total momentum after the collision is equal to the total momentum before the collision.
D. The total momentum before and after the collision is not conserved.
Answer: I honestly think it might be C
Explanation: Collisions between objects are governed by laws of momentum and energy. When a collision occurs in an isolated system, the total momentum of the system of objects is conserved. ... In the collision between the two cars, total system momentum is conserved.
Answer: C. The total momentum after the collision is equal to the total momentum before the collision.
Hope this helps
Explanation: Collisions between objects are governed by laws of momentum and energy. When a collision occurs in an isolated system, the total momentum of the system of objects is conserved. ... In the collision between the two cars, total system momentum is conserved.
A compound or material formed by a chemical reaction is known as the ____ of that reaction.
Answer:
Its is the product.
Explanation:
Based on the periodic table, which of the following elements has properties most like neon’s?
A- Boron (B)
B- Hydrogen (H)
C- Fluorine (F)
D- Krypton (Kr)
Answer:
D. Krypton (Kr)Explanation:
because
Neon and Krypton, both are belongs to Inert or Noble gas Group
Blank is the area of physical science that studies energy and how it acts with matter
Answer:
Physics is a natural science that involves the study of matter and its motion through space and time, along with related concepts such as energy and force. More broadly, it is the study of nature in an attempt to understand how the universe behaves.
Explanation: