Compare and contrast the applications and benefits of circle graphs and bar charts. Explain

Answers

Answer 1

Answer:

A circle graph, or a pie chart, is used to visualize information and data. A circle graph is usually used to easily show the results of an investigation in a proportional manner. Bar graphs are used to compare things between different groups or to track changes over time. However, when trying to measure change over time, bar graphs are best when the changes are larger.

Explanation:

In short, bar graphs are better to keep track of data over long periods of time, and circle graphs are better when you are trying to visualize a specific set of data.

Answer 2
Circle graph and Bar charts are mainly differentiated by their shapes. Circle and bars respectively.

Circle graph can be also be called pie chart, which  is more widely used. It is usually made up of a circle, divided into parts or pies. In the divided parts, it is used to differentiate between different data.

Bar charts on the other hand are like graphs having both x and y axis. It is used to represent data with respect to the height of the graph. Each data is divided into different smaller parts on the graph.

Example of what they look like is attached below.

First one is bar chart while the second is a circle graph

for more on this, visit: https://brainly.com/question/3661259

Compare And Contrast The Applications And Benefits Of Circle Graphs And Bar Charts. Explain
Compare And Contrast The Applications And Benefits Of Circle Graphs And Bar Charts. Explain

Related Questions

22. The metal roof of a building has turned a light green colour. The metal roof is most likely

Answers

The metal roof is most likely made of copper.

Copper turns green over an extended period of time when exposed to water. For example, The Statue of Liberty is made of copper and was once a bronze color. Now, it is green, similar to the roof

During bromination using NBS, the addition product is not observed because the rate of addition is _______than the rate of the chain propagation steps.

Answers

Answer:

slower

Explanation:

NBS is used in place of Br2 during bromination because the use of Br2 tends to result in the formation of a large concentration of the addition product.  This is because, the Br2 interacts with the double bond to yield only the dibromide (addition product).

The usefulness of NBS lies in the fact that it provides a lower concentration of Br2, and such that the rate addition is slower than the chain propagation steps. Only the monobromination product is observed

The low concentration of Br2 allows the free-radical reaction to out-compete the alkene addition reaction.

When 4.58 g of a nonelectrolyte solute is dissolved in water to make 725 mL of solution at 25 °C, the solution exerts an osmotic pressure of 875 torr.

Required:
a. What is the molar concentration of the solution?
b. How many moles of solute are in the solution?
c. What is the molar mass of the solute?

Answers

Answer:

a. 0.047 M

b. 0.6778 moles

c. 6.76 g/mol

Explanation:

The formula for osmotic pressure is:

π = i*M*R*T

Where:

i is the van't Hoff's factor (in this case is 1, because it is a non electrolyte solute)M is the molar concentrationR is the ideal gas constantT is the temperature in Kelvin

a.) So we solve for M:

875 torr ⇒ 785/760 = 1.15 atm25 °C ⇒ 25+273.16 = 298.16 K1.15 atm = 1 * M * 0.082 atm·L·mol⁻¹·K⁻¹ * 298.16 KM = 0.047 M

b.) We calculate the moles of solute, using the volume and molar concentration:

725 mL / 1000 = 0.725 L0.047 M * 0.725 L = 0.6778 moles

c.) We calculate the molar mass, using the mass and the number of moles:

4.58 g / 0.6778 moles = 6.76 g/mol

A. The molar concentration of the solution is 0.047 M

B. The mole of the solute in the solution is 0.034 mole

C. The molar mass of the solute is 134.7 g/mol

A. Determination of the molar concentration of the solution.

Osmotic pressure (π) = 875 torr = 875 / 760 = 1.15 atm

Temperature (T) = 25 °C = 25 + 273 = 298 K

Van't Hoff's factor (i) = 1 (non-electrolyte)

Gas constant (R) = 0.0821 atm.L/Kmol

Molarity (M) =?

π = iMRT

1.15 = 1 × M × 0.0821 × 298

1.15 = M × 24.4658

Divide both side by 24.4658

M = 1.15 / 24.4658

M = 0.047 M

B. Determination of the mole of the solute.

Molarity = 0.047 M

Volume = 725 mL = 725 / 1000 = 0.725 L

Mole of solute =?

Mole = Molarity x Volume

Mole of solute = 0.047 × 0.725

Mole of solute = 0.034 mole

C. Determination of the molar mass of the solute

Mole of solute = 0.034 mole

Mass of solute = 4.58 g

Molar mass of solute =?

Molar mass = mass / mole

Molar mass of solute = 4.58 / 0.034

Molar mass of solute = 134.7 g/mol

Learn more on Osmotic pressure: https://brainly.com/question/5925156

For the reaction of nitric oxide and oxygen to form nitrogen dioxide, the reaction begins with 12.0 g of nitric oxide and 12.0 g of oxygen at 25oC in a 10.0 L container. At equilibrium, the pressure in the container is 1148 mmHg, what is Kp?

Answers

Answer:

Explanation:

Hello!

In this case, since the undergoing chemical reaction is:

[tex]2NO+O_2\rightleftharpoons 2NO_2[/tex]

The equilibrium expression in terms of pressures is:

[tex]Kp=\frac{p_{NO_2}^2}{p_{NO}^2p_{O_2}}[/tex]

Thus, for the initial conditions, we compute the initial pressures of both nitric oxide and oxygen:

[tex]p_{NO}^{0}=\frac{12.0g*0.082\frac{atm*L}{mol*K}*298.15K}{30g/mol*10.0L}=0.978atm\\\\ p_{O_2}^{0}=\frac{12.0g*0.082\frac{atm*L}{mol*K}*298.15K}{32g/mol*10.0L}=0.917atm[/tex]

Next, since the equilibrium pressure is 1148 mmHg or 1.51 atm, we can write:

[tex]p_T=p_{NO_2}+p_{NO}+p_{O_2}\\\\1.51=2x+0.978-2x+0.917-x\\\\1.51=1.90-x\\\\x=0.39atm[/tex]

Thus, the Kp turns out:

[tex]Kp=\frac{(2*0.39)^2}{(0.978-2*0.39)^2(0.917-x)} \\\\Kp=29.4[/tex]

Best regards!

7.46 - A 0.0500-mol sample of a nutrient substance is burned in a bomb calorimeter containing 2.00 x 10g H20. If the formula weight of this nutrient substance is 114 g/mol, what is the fuel value (in nutritional Cal) if the temperature of the water increased 5.70C?​

Answers

Answer:

[tex]200\frac{kcal}{g}[/tex]

Explanation:

Hello!

In this case, for this calorimetry problem, since the combustion 0.0500 mol of the nutrient increase the temperature of water by 5.70 °C, we can notice that the heat lost by the nutrient is gained by water in order to write:

[tex]Q_{nutrient}=-Q_{water}[/tex]

Which can be also written as:

[tex]Q_{nutrient}=-m_{water}C_{water}\Delta T_{water}\\\\Q_{nutrient}=-200 g*4.184\frac{J}{g\°C}*5.70\°C\\\\Q_{nutrient}=4769.8 J[/tex]

Thus, in terms of the grams of the nutrient:

[tex]m_{nutrient}=0.0500mol*\frac{114g}{1mol}=5.70g[/tex]

The fuel value in nutritional Cal (kcal/g) turns out:

[tex]Fuel \ Value=\frac{-4.7698kJ}{5.70g}*\frac{1kcal}{4.184kJ}=200\frac{kcal}{g}[/tex]

Best regards!

An ideal gas had a mass of 0.0218g and occupied a volume of 1.111L at 0oC and 0.0100atm. What is the molar mass of this gas?

Answers

Answer:

Explanation:

we shall use gas law formula to solve the problem .

P = .01 atm

V = 1.111 L

T = 273 K

mass of gas = .0218

molar mass = M

no of moles n = .0218 / M

PV = n RT

.01 x 1.111 = (.0218 / M)  x .082 x 273

.0218 / M = .000496

M = .0218 / .000496

= 43.95

What is the most abundant element on Earth?
A oxygen
B Cobalt
C Carbon
D Iron
5
Any substance represented by a chemical formula
A Homogenous mixture
B Heterogenous Mixture
C elements
D pure substance

Answers

Answer:

oxygen is the most abundant element on the earth.

PLEASE HELP!!!!

what happens when the ocean reaches it’s saturation level of carbon dioxide?

Answers

Hi!

When the ocean reaches its saturation level of carbon dioxide, a couple of things will happen:

First, more carbon dioxide will remain in the atmosphere, and second, the ocean's pH will drop.

Carbonate and bicarbonate ions in seawater act as a buffer system which keeps the ocean's pH levels stable. When CO2 dissolves in seawater, it reacts with the ocean's buffer system in such a way that it produces two hydrogen ions, which lowers the pH. As more and more CO2 reacts with the ocean's buffer system and the system becomes saturated, less atmospheric carbon dioxide will cross over into the ocean. This excess CO2 will remain in the atmosphere and contribute to global climate change.

Hope this helped!

When the ocean reaches it's saturation level of carbon dioxide  more amount of carbon dioxide remains in the atmosphere and  pH of the ocean drops.

What is saturation level?

It is defined as the level or extent up-to which a substance is soluble in a particular solvent. Due to global warming ,there is an excessive release of carbon dioxide in atmosphere. The excessive amount cannot be soluble in the ocean water which leads to ocean acidification.

As a result of ocean acidification the pH of water in the ocean drops thus there is less amount of oxygen present for aquatic organisms which is needed to survive. When carbon dioxide dissolves in water it yields carbonic acid which further reduces the pH of water  and thus making it unfit for aquatic environment.

Learn more about saturation level,here:

https://brainly.com/question/13781023

#SPJ2

How do you think energy flows in and out of the earth's atmosphere ?

Answers

As air is heated by surfaces or solar radiation, it triggers convection currents, sometimes called thermals. Other absorbed solar radiation is emitted from surfaces as infrared radiation and then eventually moves back out into space via the atmosphere.

Lake Michigan holds 13 billion gallons of water. If just Chicago removed water from the lake and it never rained again, how many decades would the water last?

Answers

Answer:

Check explanation section.

Explanation:

In order to be able to answer this question accurately,there is need to follow the formula below for the calculation;

Numbers of decades = total volume/ volume per decade. ----------------------(1).

So, we are given from the Question above that the volume of water in Lake Michigan = 13 billion gallons of water.

And if chicago uses 5 million gallons of water every decade.

Therefore, using the formula (1) above, we have;

Numbers of decades = 13 × 10^9/ 5 × 10^6 = 2.6 × 10^15 decades.

In acid solution, water can add to the double bond of 2‑butenedioic acid to form 2‑hydroxysuccinic acid.
HOOCCH=CHCOOH+H2O <== H2SO4 ==> HOOCCH2CH(OH)COOH
This reaction is also an important reaction of the tricarboxylic acid cycle in cells, wherein the reaction occurs in neutral solution, so the acid groups are both ionized to the carboxylate form. The reaction is catalyzed by the stereospecific enzyme fumarase that utilizes only the trans form of 2‑butenedioate ion, also known as fumarate, and produces only the (S)‑2‑hydroxysuccinate enantiomer,also known as (s)-malate). Draw the correct stereochemical structures of these two compounds of the fumarase-catalyzed reaction.
fumarate (s)-malate
(trans-2-butenedioate) ((s)-2-hydroxysuccinate)
Fumarase
+ H2O <===========>

Answers

Answer:

Explanation:

The stereochemical structures of the two compounds of the fumarase-catalyzed reaction are in the attachment below. The reaction been referred to is illustrated in the equation below

HOOCCH=CHCOOH + H₂O ==> HOOCCH₂CH(OH)COOH

The compounds attached are trans-2-butenedioate (which is one of the reactants) and (s)-2-hydroxysuccinate (which is the product formed)

Note that stereoisomers are isomers that differ in spatial orientation, thus there are other isomers that could contain the same atoms and have slightly but different spatial orientation such as cis-2-butenedioate and (r)-2-hydroxysuccinate

3 Which of the following best represents potential energy? *
A Air leaking rapidly from a car tire.
B A marble sitting at the top of a ramp.
C Heat radiating from a large forest fire.
D Water flowing through a rubber hose.

Answers

Answer:

Its B

Explanation:

If 0.0806 mol CaCl2 is dissolved in water to make a 0.490 M solution, what is the volume of the solution?

Answers

Answer:

0.16 L

Explanation:

From the question given above, the following data were obtained:

Mole = 0.0806 mole

Molarity = 0.490 M

Volume =?

Molarity is simply defined as the mole of solute per unit litre of the solution. Mathematically, it is expressed as:

Molarity = mole /Volume

With the above formula, we can obtain the volume of the solution as illustrated below:

Mole = 0.0806 mole

Molarity = 0.490 M

Volume =?

Molarity = mole /Volume

0.490 = 0.0806/volume

Cross multiply

0.490 × volume = 0.0806

Divide both side by 0.490

Volume = 0.0806 / 0.490

Volume of solution = 0.16 L

Thus, the volume of the solution is 0.16 L.

A solution is a mixture of solute in the solvent. The volume of the solution is 0.16 L.

What is a solution?

A solution is a mixture of solute in the solvent.

An example of a solution is a mixture of salt in water.

Given,

Moles = 0.0806 mol [tex]\rm CaCl_2[/tex]

Molarity = 0.490 M

To find: the volume of the solution

[tex]Molarity = \dfrac{n}{V}[/tex]

Putting the values

[tex]0.490 M = \dfrac{ 0.0806}{V}\\\\0.490 M \times V = 0.0806\\\\Divide\; both\;side\; with\; 0.490\\\\V= \dfrac{ 0.0806}{0.490}=0.16 L[/tex]

Thus, the volume so the solution is 0.16 l.

Learn more about the solution, here:

https://brainly.com/question/7932885

How much work (in JJ) is required to expand the volume of a pump from 0.0 LL to 2.5 LL against an external pressure of 1.1 atmatm

Answers

Answer:

- 278.85 J  

Explanation:

Given that:

Pressure = 1.1 atm

The initial volume V₁ = 0.0 L

The final volume V₂ = 2.5 L

The work that takes place in a reaction at constant pressure can be expressed by using the equation:

W = P(V₂ - V₁ )

Since the volume of the gas is expanded from 0 to 2.5 L when 1.1 atm pressure is applied. Then, the work can be given by the expression:

W = - P(V₂ - V₁ )

W = -1.1 atm ( 2.5 - 0.0) L

W = -1.1 atm (2.5 L)

W = -2.75 atm L

Recall that:

1 atm L = 101.4 J

Therefore;

-2.75 atm L = ( -2.75 × 101.4 )J

= -278.85 J  

Thus, the work required at the chemical reaction when the pressure applied is 1.1 atm  = - 278.85 J  

Which reason best explains why metals are malleable

Because they have delocalized electrons

Because they have localized electrons

Because they have ionic bonds

Because they have rigid bonds

Answers

Answer:

A.) because they have delocalized electrons

Explanation:

This is right on edg. 2020

Answer:

Bruzaaubrey is 100% correct

Explanation:

the proper answer is: "Because they have delocalized electrons(A)"

Make sure to mark bruzaaubrey brainliest :)

In a coffee-cup calorimeter, 1.60 g of NH4NO3 was mixed with 75.0 g of water at an initial temperature of 25.008C. After dissolution of the salt, the final temperature of the calorimeter contents was 23.348C.

Required:
a. Assuming the solution has a heat capacity of 4.18 J 8C21 g21, and assuming no heat loss to the calorimeter, calculate the enthalpy of solution (DHsoln) for the dissolution of NH4NO3 in units of kJ/mol.
b. If the enthalpy of hydration for NH4NO3 is 2630. kJ/mol, calculate the lattice energy of NH4NO3.

Answers

Answer:

Explanation:

mass of the solution m = 1.6 + 75 = 76.6 g

fall in temperature = 25 - 23.34 = 1.66°C

heat absorbed = mass x specific heat x fall in temperature

= 76.6 x 1.66 x 4.18

= 531.5 J .

= .5315 kJ .

mol weight of ammonium nitrate = 80 g

heat absorbed by 1.6 g = .5315 kJ

heat absorbed by 80 g or one mole = 26.575 kJ

enthalpy change ΔH = +26.575 kJ

b )

enthalpy of hydration = 2630 kJ / mol

lattice energy = enthalpy of hydration + enthalpy change

= 2630 + 26.575

= 2656.575 kJ  .

the difference in energy between the n=1 and n=2 energy levels in a hydrogen atom is 1.64x10^-18 J. what happens when an electron in a hydrogen atom transitions from n=2 to n=1?

Answers

Answer:

It emits 1.64 x 10⁻¹⁸J of energy

Explanation:

The n = 1 is a lower quantum level compared to n = 2.

When a hydrogen atom moves from a higher level to a lower one, it simply emits the energy difference between the two levels.

If a hydrogen atom moves from a lower energy level to a higher one such as from 1 to 2, they absorb the energy difference to attain the new excited state. So, for an electron in the hydrogen atom to move from a higher energy level to a lower one, it must emit 1.64 x 10⁻¹⁸J of energy.

1) If a bottle of olive oil contains 1.3 kg of olive oil, what is the volume, in milliliters, of the olive oil? Express your answer to two significant figures and include the appropriate units. 2) A cannon ball made of iron has a volume of 116 cm^3. What is the mass, in kilograms, of the cannon ball? Express your answer to three significant figures and include the appropriate units. 3) A balloon filled with helium has a volume of 6.1 L. What is the mass, in grams, of helium in the balloon? Express your answer to two significant figures and include the appropriate units.

Answers

Answer:

1) 1.4 × 10³ mL

2) 0.913 kg

3) 1.1 g

Explanation:

1)

Step 1: Calculate the volume of 1.3 kg of olive oil

The density of olive oil is 0.917 kg/L.

1.3 kg × (1 L/0.917 kg) = 1.4 L

Step 2: Convert the volume to mL

We will use the relationship 1 L = 10³ mL.

1.4 L × (10³ mL/1 L) = 1.4 × 10³ mL

2)

Step 1: Calculate the mass of the cannon ball

The density of iron is 7.87 g/cm³.

116 cm³ × 7.87 g/cm³ = 913 g

Step 2: Convert the mass to kg

We will use the relationship 1 kg = 10³ g.

913 g × (1 kg / 10³ g) = 0.913 kg

3)

Step 1: Calculate the mass of the helium in the balloon

The density of balloon is 0.18 g/L.

6.1 L × 0.18 g/L = 1.1 g

Suppose in an experiment to determine the amount of sodium hypochlorite in bleach, 0.0000538 mo KIO3 were titrated with an unknown solution of Na2S2O3 and the endpoint was reached after 17.80 mL. How many moles of Na2S2O3 did this require?

Answers

Answer:

3.228x10⁻⁴ moles of Na2S2O3 are required

Explanation:

In iodometry, the reaction of KIO3 with Na2S2O3 is:

KIO3 + 6 Na2S2O3 + 6H⁺ → KI + 3Na2S4O6 + 3H2O + 6Na⁺

Where 6 moles of Na2S2O3 reacts per moles of KIO3.

The moles of Na2S2O3 required to reach endpoint when 0.0000538 moles of KIO3 are:

0.0000538 moles of KIO3 * (6 moles Na2S2O3 / 1 mol KIO3) =

3.228x10⁻⁴ moles of Na2S2O3 are required

how does mass and volume affect sinking and floating? Please don't plagiarize.... ​

Answers

Answer:

If an object has a higher density than the fluid it is in (fluid can mean liquid or gas), it will sink. If it has a lower density, it will float. Density is determined by an object's mass and volume. If two objects take up the same volume, but have one has more mass, then it also has a higher density.

Explanation:

Explain some of the uses of metals based on their properties.

Answers

Answer:

Explain some of the uses of metals based on their properties.

Explanation:

Metals have a shiny or metallic luster and are good conductors of heat and electricity, they can be bent and pounded in various shapes, so they can be used on cars, coins, some pipes, keys, and and a flag.

name the intermolecular force between Ne in liquid​

Answers

Answer:

Intermolecular forces in liquid are

Intermolecular forces are electrostatic in nature and include van der Waals forces and hydrogen bonds. Molecules in liquids are held to other molecules by intermolecular interactions, which are weaker than the intramolecular interactions that hold the atoms together within molecules and polyatomic ions.

Answer:

it is found in the halogen ,the no le gases and in other non polar molecules such as co2 and methane. Landon dispersion force are part of the Vander waals force or weak intermolecular attraction

A mixture of two gases with a total pressure of 2.00 atm contains 0.70 atm of Gas A. What is the partial pressure of Gas B in atm?

Answers

The partial pressure of Gas B : 1.3 atm

Further explanation  

Dalton's Law stated

the total pressure of a mixture of gases is equal to the sum of the partial pressures of the component gases  

Can be formulated:  

[tex]\tt P~tot=P1+P2+P3...Pn[/tex]

P tot = 2 atm

P gas A = 0.7 atm

So P gas B :

[tex]\tt P~gas~B=P~tot-P~gas~A\\\\P~gas~B=2-0.7=1.3~atm[/tex]

 

The partial pressure of Gas B in the mixture of two gases has been 1.3 atm.

The partial pressure of the gas can be defined as the pressure of the particular gas in the mixture of gases.

According to dalton, the total pressure of the gas has been the sum of the partial pressure of the individual gases.

Thus, total pressure = partial pressure of gas A + partial pressure of gas B

Given, total pressure = 2 atm

The partial pressure of gas A = 0.70 atm

So, the partial pressure of Gas B = total pressure - partial pressure of gas A

The partial pressure of Gas B = 2.0 atm - 0.70 atm

The partial pressure of Gas B = 1.3 atm

Thus, the partial pressure of Gas B in the mixture of two gases has been 1.3 atm.

For more information about the partial pressure, refer to the link:

https://brainly.com/question/8408970

Which statement is not true for a magnetic field?
O A. A magnetic field occurs near a wire that has no current.
OB. A magnetic field is produced by a magnet with two poles.
O c. A magnetic field loops from the north pole to the south pole.
O D. A magnetic field occurs near a current-carrying wire.

Answers

Answer:

The answer is letter A.

A. A magnetic field occurs near a wire that has no current.

Because magnetic field occur near a current carrying wire.

If 49.0 g of O2 is mixed with 49.0 g of H2 and the mixture is ignited, what is the maximum mass of water that may be produced?

Answers

Answer:

[tex]55.2gH_2O[/tex]

Explanation:

Hello!

In this case, since the reaction between hydrogen and oxygen to produce water is:

[tex]2H_2+O_2\rightarrow 2H_2O[/tex]

When equal masses of each reactant go in contact to carry out the reaction, we can identify the maximum mass of yielded water as the fewest mass yielded by each reactant, just as shown below:

[tex]m_{water}^{by\ H_2}=49.0gH_2*\frac{1molH_2}{2.02gH_2}*\frac{2molH_2O}{2molH_2}*\frac{18.02gH_2O}{1molH_2O} =170gH_2O\\\\m_{water}^{by\ O_2}=49.0gO_2*\frac{1molO_2}{32.0gO_2}*\frac{2molH_2O}{1molO_2}*\frac{18.02gH_2O}{1molH_2O} =55.2gH_2O[/tex]

Thus, since hydrogen yields more water than real, we limit the maximum mass of water to those 55.2 g yielded by oxygen as hydrogen would be in excess.

Best regards!

I need help click the image please help

Answers

Answer:

Answer:

a plant cell

Explanation:

because the chrolopast is green

Explanation:

The sample of 15.0 g of KCl is dissolved into a solution with a total volume of 250.0 mL. What is the molarity of KCl in the solution?

Answers

Answer:

0.805 M.

Explanation:

Hello!

In this case, since the molarity of a solution is computing by dividing the moles of solute over the volume of solution in liters (M=n/V), for 15.0 g of potassium chloride (74.55 g/mol) we compute the corresponding moles:

[tex]n=15.0gKCl*\frac{1molKCl}{74.55gKCl}=0.201molKCl[/tex]

Next, since the volume is 0.2500 in liters, the molarity turns out:

[tex]M=\frac{0.201mol}{0.2500L} \\\\M=0.805M[/tex]

Best regards!

How do hurricanes form? How do hurricanes form?

a Hurricanes form when winds circulate about a column of cool air.

b Hurricanes form when two warm fronts meet over the ocean

c Hurricanes form when warm air over the equator mixes with cold air from the poles

d Hurricanes form as a result of rising warm air and circulating winds​

Answers

I think the answer is D

Answer:

D. Hurricanes form as a result of rising warm air and circulating winds​

Explanation:

How is thermal energy transferred during conduction? Check all that apply.
Thermal energy is transferred hetween particles that are not touching each other.
Thermal energy is transferred between particles that are in direct contact with each other.
Thermal energy is transferred between objects of different temperatures.
Thermal energy is transferred between objects of the same temperature.
Thermal energy is transferred from slow-moving particles to fast-moving particles.
Thermal energy is transferred from fast-moving particles to slow-moving particles.

Answers

Answer:energy

Explanation:needed points sorry

Please help me please it due today at 11:00am plz help me

Answers

Answer:

Point F

Explanation:

Point F is the maximum potential energy.

Point G is lots of kinetic energy.

Point H is low potenital energy and low kinetic energy.

Other Questions
Complete the equation that represents the total value of the nickels and p pennies write 9/20 as a decimal What is the value of \large\ellell in the equation of 10(23+7)=100+100 If a piece of art is retro, it must limit its references to one era.TrueFalse find y when y = 3x^2 -2x+5 and x = -1 guys can u help me write a program need help asp will give 25 points and brainlist if correct Read the excerpt from Through the Looking-Glass by Lewis Carroll.The Red Queen broke the silence by saying to the White Queen, I invite you to Alice's dinner-party this afternoon.The White Queen smiled feebly, and said And I invite YOU.I didn't know I was to have a party at all, said Alice; but if there is to be one, I think I ought to invite the guests.We gave you the opportunity of doing it, the Red Queen remarked: but I daresay youve not had many lessons in manners yet?Which life experience best connects to the theme in the excerpt?Jeanettes parents tell her that she will go to college when she graduates from high school.Felipe organizes a graduation party for himself and his friends when they graduate from high school.Giselles friends organize a summer vacation together, but they do not invite her.Monique must decide between going to her best friends birthday party or her cousins wedding. The line segment joining the points ( 3,-4) and (1,2) is trisected at the points P and Q . If the coordinates of P and Q are (p , -2 ) and ( 5/3 , q ) respectively, find the values of p and q. What is the typical response of people to a government that abuses them if they are used to that government? Which choice best describes the setting of Rumpelstiltskin?"Rumpelstiltskin" by the Brothers Grimmin the past at the home of a goblino in a kingdom by the forest in the pastin the present time, deep in the forestin a castle in the future can someone please help..... Is it bad that the smell of burnt pie crust is nasally offending when its in the oven but gratous when its through the house.... Is this what holidays smell like? Over baked gramcracker? The Wells family goes out to eat dinner every Saturday night. Last Saturday was the 100th time the family had eaten at Happy Joe's Pizza House. The owner of Happy Joe's gave the family a 20% discount for customer loyalty. The bill was $27.50 before the discount. What was their bill after the discount? What should an applicant do when completing an application PLEASE HELP!! 15 POINTS AND BRAINLIEST !! The Gulf Stream and the North Atlantic Current carry warm water all the way to _____.northern AfricaSouth AmericaAustraliawestern Europe What was foe Zawinul's key contribution to jazz?AHe pioneered the use of electric piano and synthesizers in jazz.B.He pioneered the use of modes..He introduced nonconventional instruments to jazz.D.He was the first to combine punk instrumentation with jazz. Will give 25 points! Please Explain! Im so confused! Big test on friday!Write the slope-intercept form of an equation that passes through the given point and is perpendicular to the graph of the equation(5,2), y=x-5a. y=-x+7b. y=3x+1c. y=x+7d. y=x+ 12/5Please Dont forget to Also Explain! Thank You! Choose the items that CORRECTLY describe an aspect of the building of the First Transcontinental Railroad. Student Response It crossed the Rocky Mountains. Large number of Irish immigrants were used in construction going westward. It crossed the Appalachian Mountains. The Union Pacific Railroad used mostly Chinese labor. The Central Pacific Railroad built track from west to east. Large numbers of Japanese immigrants were used in eastward construction Construction was completed before the end of the Civil War. The Central Pacific and Union Pacific railroads met at Promontory Point, Utah, completing the project. What eats a parrotfish? Does a great white shark count