Answers
Answer:
the pressure increases
Related Questions
The Bohr model of the atom suggest that the protons and neutrons are found in the nucleus and the electrons orbit the nucleus much line planets around the sun. How is our modern model of the atom different from this model?
Answers
Answer:
D) The electrons move around the nucleus in an electron cloud
Explanation:
i just did it on usa test prep !
if u want to sign a form and u meet your subject teacher to sign his subject and he tells you to write an undertaking what will you write . You will have to write your address and his address, you have to write heading, body of the letter and salutation.
Answers
you would have to kn
Please help me
What will oxygen likely do to complete its outermost shell, based on the Lewis dot diagram shown?
accept electrons
accept some electrons and give up other electrons
move electrons from the inner shell to the outer shell
give up electrons
Answers
Answer:
A. Accept electrons
Explanation:
The octet rule states that 8 electrons stabilizes a molecule. This means that oxygen will try to fill the two empty spots with electrons from other molecules. The Lewis Dot diagram shows these two empty spots with the empty circles at the bottom.
Lewis dot structures, also known as electron dot structures, are schematics that show the interatomic chemical bonds in a molecule. Additionally, they show how many lone pairs there are overall in each of the atoms that make up the molecule. Here 'O' accepts electrons. The correct option is A.
The electrical structures of the elements, especially the electron pairings, are reflected in the Lewis dot structures. Lewis structures can be viewed as "electron bookkeeping" and are a helpful approach to condensing some bonding-related information. Each dot in a Lewis dot structure corresponds to 1 electron.
Group 6 member oxygen still requires two additional electrons to complete its outer shell and remain stable. According to the octet rule, an object needs 8 valence electrons in the outer shell to be stable.
Thus the correct option is A.
To know more about Lewis dot diagram, visit;
https://brainly.com/question/34127343
#SPJ6
Why do we use Scientific Notation?
Answers
Answer:
Scientific Notation was developed in order to easily represent numbers that are either very large or very small. As you can see, it could get tedious writing out those numbers repeatedly. So, a system was developed to help represent these numbers in a way that was easy to read and understand: Scientific Notation.
Explanation:
Answer:
Working with very large or small quantities usually ends up being quite complicated. Scientific notation is a way to write numbers in an abbreviated way, making it easier to work with these numbers.
Explanation:
Identity the solution among the following mixture-air
Answers
Answer:
Air is composed of about 78% nitrogen, 21% oxygen, and 1% of other gasses like carbon dioxide
Explanation:
Brainly deleted my answer so I came back to answer this again :(
Which alignment of the Sun, Moon, and Earth causes a lunar eclipse?
A.
B.
C.
D.
Answers
Answer:
A lunar eclipse occurs when the Moon passes directly behind the Earth into its umbra (shadow). This can occur only when the Sun, Earth, and Moon are aligned exactly with the Earth in the middle. Hence, a lunar eclipse can only occur the full moon phase
Explanation:
please mark me brainlist
Answer:
A sun
Explanation:
because sun has heat and gives light
What is the ionic charge of elements in column 1?
Answers
Answer:
こんにちは
Explanation:
A beaker contains 318 mL
m
L
of a 5.75 M
M
HCl(aq)
H
C
l
(
a
q
)
solution. Determine the new concentration of the solution after it is diluted by adding 143 mL
m
L
of water to the beaker.
Answers
Answer:
3.97 M
Explanation:
Given data:
Initial volume V₁ = 318 mL
Initial molarity M₁ = 5.75 M
New volume V₂= 461 mL
New concentration M₂= ?
Solution:
New volume V₂= 143 mL+ 318 mL
New volume V₂= 461 mL
Formula:
M₁V₁ = M₂V₂
M₂ = M₁V₁ / V₂
M₂ = 5.75 M × 318 mL / 461 mL
M₂ = 1828.5 M. mL/ 461 mL
M₂ = 3.97 M
Populations in the deep-sea vent ecosystem can get energy storage molecules without sunlight. Do you agree or disagree with this claim? Explain your answer.
Answers
Answer:
Agree
Explanation:
The deep-sea vent ecosystem gets energy storage molecules without sunlight. Life in the vent ecosystem relies on alternate energy through the use of hydrogen sulfide present in the water emanating from the vent.
The producers that form the basis of the food chain are bacteria that use the hydrogen sulfide to create energy-rich molecule in a process known as chemosynthesis.
The equation of the chemosynthesis is as below:
[tex]CO_2 + 4H_2S + O_2 --> CH_20 + 4S + 3H_2O[/tex]
The chemical name for common salt is
Answers
Sodium chloride
commonly known as salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. With molar masses of 22.99 and 35.45 g/mol respectively, 100 g of NaCl contains 39.34 g Na and 60.66 g Cl.
Answer:
Sodium chloride
Explanation:
that is the name and the formula is
NaCl
Which of the following is the final stage of development before birth?
a
zygote
b
embryo
c
uterus
d
fetus
Answers
Answer:
D. Fetus
Explanation:
Uranium - 235
Atomic #
Atomic mass
# of protons
# of neutrons
# of electrons
Answers
Answer:
# of protons
Explanation:
Mitochondria are found within: A) All prokaryotic cells B) A cell's plasma membrane C) A cell's nucleus D) Eukaryotic cells E) None of these answers are correct
Answers
Answer:
The correct answer is - D) Eukaryotic cells.
Explanation:
The mitochondrion is found in all eukaryotic organisms with the exception of a few. It is a double-membrane-bound organelle within the cytoplasm of the cell that takes in nutrients, breaks them down, and creates energy that makes it the powerhouse of the cell.
It turns the chemical energy from nutrients in the cell to generate energy in a form usable to the host cell which is ATP. Prokaryotic cells lack mitochondria and other double membrane-bound organelles and it s found outside of the nucleus in the eukaryotic cells.
How is kinetic energy of particles and temperature related
Answers
Answer:
The higher the temperature, the faster the particles move, the lower the temperature, the slower.
Volume of water displaced
Answers
Answer:
The volume of displaced fluid is equivalent to the volume of an object fully immersed in a fluid.
Help please. ASAP.
1. Explain how you think changing in the thickness or length of the nail will affect the strength of the electromagnet
Answers
Answer:
I believe- If there is more metal for the magnet to reach for, then the strength will grow but it may be harder to pick up off of a surface depending on the weight of the nail. If it is a light nail, it would be more efficient for a quick result in having the magnet to pick it up
Explanation:
Answer:
Ferromagnetic materials make the magnet stronger than non-ferromagnetic materials like paper, wood, or air. A wider nail will make the magnet stronger. Making the nail longer will not make the magnet stronger, unless you also add more turns to the coil.
Explanation:
I hope this helps!!
1. At what temperature dose water freeze
2. at what temperature dose ice melt
3. At what temperature dose water boil
Answers
Answer:
1. water will freeze at a temperature below 32 degrees fahrenheit 0 degree celsius.
2. Ice will melt at a temperature above 32 degrees fahrenheit 0 degrees celsius.
3. water boils at 212 degrees fahrenheit or 100 degrees celsius.
Aly's science class was looking at bacteria through a microscope. Aly's teacher said some bacteria can be as small as 0.00365 cm long. What is the length of the bacteria written in scientific notation?
Answers
Answer:
[tex]0.00365\ cm=3.65\times 10^{-3}\ cm[/tex]
Explanation:
Aly's teacher said some bacteria can be as small as 0.00365 cm long.
In this problem, we need to write the length of the bacteria written in scientific notation. Any number can be written in the form of scientific notation as follows :
[tex]N=a\times 10^b[/tex]
a is a real no and b is an integer
In the given number, there are two zeroes before 3. We need to shift the decimal after 3. It can be done as follows :
[tex]0.00365\ cm=3.65\times 10^{-3}\ cm[/tex]
Hence, this is the required solution.
Describe what happens to kinetic energy of the molecules when temperature increases.
Answers
Answer:
When the temperature of an object increases, the average kinetic energy of its particles increases. When the average kinetic energy of its particles increases, the object's thermal energy increases. Therefore, the thermal energy of an object increases as its temperature increases.
Explanation:
That is all I know.
how many atoms are in hydrogen
Answers
Answer:6.02
Explanation:
Answer:
there are about 6 atoms in hydrogen
A scientist built a computational model to investigate what happens when magma comes into contact with the ground surface. In the model, the ground surface was 293K, whereas the magma was 1,500K. The model examined different depths of the magma away from Earth's surface and toward the core. Over a greater amount of time, more magma cooled. What form of heat transfer accounts for the magma cooling?
Answers
Answer:
Conductive heat transfer is most likely responsible for the cooling of the magma
Explanation:
The Earth's core is continuously cooling due to human's digging, allowing for more space and heat escape from the Earth's core. All magma closer to the core would have its heat absorbed by the core, hereby increasing its coolness.
This heat transfer process is common to conduction.
I hope this was helpful.
what are the 3 types of water?
Answers
Answer:
3 Types of Water: Mineral, Spring and Prepared Water
Teresa creates an experiment Washington states to read colored substances together in a container in observes the solution slowly changing from red to blue for the next eight minutes. The solution becomes completely blue after 8 minutes. What does this represent about the type of change happening in the container
Answers
The question is incomplete, the complete question is;
Theresa creates an experiment where she mixes two red-colored substances together in a container and observes the solution slowly changing from red to blue for the next eight minutes. The solution becomes completely blue after eight minutes. What does this represent about the type of change happening in the container? A chemical change started immediately and finished at eight minutes. A non-chemical change started immediately and finished at eight minutes. A chemical change occurred at four minutes. A non-chemical change occurred at four minutes.
Answer:
A chemical change started immediately and finished at eight minutes.
Explanation:
A chemical change is one in which a new substance is formed. One of the indicators that a chemical change has occurred is the change in the color of the system from red to blue.
The question clearly stated that the change occurred gradually. This means that the reaction must have started immediately the substances were mixed and went on to conclusion after eight minutes when the complete blue color appears.
The most stable group of elements on the periodic table is the?
A) halogens
B) noble gases
C) alkali earth metals
D) alkaline earth metals
Answers
Answer:
Noble Gases B
Explanation:
The noble gases are the chemical elements in group 18 of the periodic table. They are the most stable due to having the maximum number of valence electrons their outer shell can hold. Therefore, they rarely react with other elements since they are already stable.
Most stable because they have the maximum number of valence electrons their outer shell can hold
Help plz!!!!!!!!!! Urgent
Answers
Answer:
Explanation:
10^-2
Calculate the average atomic mass of antimony
Antimony-121 has a mass of 120.904 amu and a natural % abundance 57.21
Antimony-123 has a mass of 122.904 amu and a natural % abundance of 42.79
can you give the work aswell trying to understand how to do it
Answers
Answer:
Wow, now this one is a hard one, took me quite a while to figure it out but here it is
The abundances of the two isotopes is:
Antimony-121 = 57.2%
Antimony-123 = 42.8%
Explanation:
CAN SOMEONE PLEASE HELP ME WITH THIS
Answers
Answer:276ml
Explanation:
CHEM ASSIGNMENT!!
PLEASE HELP
Answers
Answer:
Explanation:
q=mcat
q= 50g(4.184)(100-100)
q = 0
Anita was using steel to make rusted sculptures. After building each sculpture, she caused the steel in the sculpture to rust by placing it into a tub filled
with salt water for eight hours. Anita wondered if steel would rust faster submerged in vinegar instead of salt water. To find out, Anita cut ten squares of
steel sheet metal and split them into two equal groups. She put one group of squares into a tub filled with salt water and the other group of squares
into a tub filled with vinegar. Once an hour for eight hours, Anita counted the number of rusted steel squares in each group.
What is the manipulated independent variable in Anita's experiment?
Answers
Answer:
The type of liquid in the tub (salt water or vinegar)
Explanation:
The manipulated independent variable in Anita's experiment is the type of liquid in the tub.
The independent variable is the controlled or manipulated variable in the course of an experiment. It can also be referred to as the 'cause' variable which has the capacity to produce 'effects' on another variable - the dependent variable.
In this case, the type of liquid the tub is filled (salt water or vinegar) will hypothetically affect the rusting period of the steel. Hence, the dependent variable is the type of liquid the tub is filled while the dependent variable would be the time it takes for the steel to get rusted.
Which of these could create static electricity?
A.Plugging in a vacuum
B.Running a blender
C.Combing one's hair
D.Turning on a car
Answers
c well actually I remember being tought this but I cant remember it 100
Because it’s like when you rub a ballon on your hair and your hair becomes static. And because if you look at the other options and do process of elimination you would get C.
A- that’s just electricity from a plug in
B- same thing as A
And
D- that’s with a engine and gas
(Hopefully this helped.)
And from google “Using plastic combs and brushes on your hair can cause static electricity, much like that old trick you did as a kid of making your hair stand up by rubbing a plastic balloon on it.”