Answer:
pH value test can be used to demonstrate that NaOH is a stronger alkali than NH3
Explanation:
pH value test can be used to demonstrate that NaOH is a stronger alkali than NH3. This is done by measuring the same volume of equal concentration of hydroxide and ammonia. A glass rod was dipped into 0.2 M of sodium hydroxide and 0.2 M of ammonia, each drop of solution was then placed on a pH paper matched with a color chart and the pH value was recorded.
The result showed that sodium hydroxide being a strong alkali would dissociate completely in aqueous solution thereby having a higher pH while ammonia would dissociate slightly/partially in aqueous solution thereby having a lower pH value
If the atmospheric pressure in the laboratory is 1.2 atm, how many moles of gas were in each syringe? (Hint: Choose one volume and temperature pair from your data table to use in your ideal gas law calculation.)
Answer:
A: 2.525 x 10-4 mol
B: 2.583 x 10-4 mol
Explanation:
Part A:
Data Given:
. Temperature of water (H2O) = 21.3°C
Convert Temperature to Kelvin
T = °C + 273
T = 21.3 + 273 = 294.3 K
volume of (H2O) gaseous state = 5.1 mL
Convert mL to liter
1000 mL = 1L
5.1 ml = 5.1/1000 = 0.0051 L
Pressure = 1.2 atm
. no. of moles = ?
Solution
no. of moles can be calculated by using ideal gas formula
PV = nRT
Rearrange the equation for no. of moles
n=PV/RT......... (1)
where
P = pressure
V = Volume
T= Temperature
n = Number of moles
R = ideal gas constant
where
R = 0.08206 L.atm/ mol. K
Now put the value in formula (1) to calculate no. of moles of
n = 1.2 atm x 0.0051 L / 0.08206 L.atm.mol-1. K-1 x 294.3 K
n = 0.0061 atm.L / 24.162 L.atm.mol-1
n = 2.525 x 10-4 mol
no. of moles of gas (H2O) = 2.525 x 10-4 mol
Part B:
Data Given:
Temperature of water (H2) = 21.3°C
Convert Temperature to Kelvin
T = "C + 273
T= 21.3 + 273 = 294.3 K
volume of (H2) gas = 5.2 mL
Convert mL to liter
1000 mL = 1 L
5.2 ml = 5.2/1000 = 0.0052 L
Pressure = 1.2 atm
. no. of moles = ?
Solution
no. of moles can be calculated by using ideal gas formula
PV = nRT
Rearrange the equation for no. of moles
n= PV / RT......... (1)
where
P = pressure
V = Volume
T= Temperature
n = Number of moles
R = ideal gas constant
where
R = 0.08206 L.atm/mol. K
Now put the value in formula (1) to calculate no. of moles of
n = 1.2 atm x 0.0052 L/0.08206 L.atm.mol-1. K-1 x 294.3 K
n = 0.0062 atm.L/ 24.162 L.atm.mol-1
n = 2.583 x 10-4 mol
I
no. of moles of gas (H2) = 2.583 x 10-4 mol
is bleached water safe for drinking???
Answer:
NO most of the time
Explanation:
I hope this is for school and not personal reasons. Bleach will kill you if drank plain, if it's diluted a little it may not be fatal but can still greatly harm your organs. If it is diluted extremely it is used for cleaning tap water and is perfectly fine.
Just to be on the safe side, I want you to know there is always help, and if you need someone to talk or text this is the number for the National Su1c1de Hotline and it is free and available if you are ever feeling like self harm is the only way out:
800 273 8255
find the volume of the prism iready help me please
Answer:
The answer is 80!
Explanation:
A prism is a three dimensional solid object in which the two ends are identical. It is the combination of the flat faces, identical bases and equal cross sections. The volume of the prism is 819 cm³.
What is the volume of the prism?A prism is a polyhedron with two parallel congruent faces called the bases that are polygons. The volume of a three dimensional solid is the amount of space it occupies. The volume is measured in cubic units. The volume can be denoted in m³, cm³, ft³, etc.
The volume of a prism is the area of the base times the height. The equation used to calculate the volume is:
Volume = Base area × Height
Here the rectangle has 9cm length and 7cm width. Then the area is:
Area = 9 × 7 = 63 cm²
The height of prism = 13 cm
Then the volume is:
V = 63 × 13 = 819 cm³
Thus the volume of the prism is 819 cm³.
To know more about volume of prism, visit;
https://brainly.com/question/29273624
#SPJ3
Your question is incomplete most probably your full question was
What is volume of the rectangular prism with length 9cm, width 7cm and height 13 cm?
Which of he following is a secondary alkanol?
a. CH3CH2CH2OH
b. CH3CH2CH2CH2OH
c. C(CH3)3OH
d. CH3CH(OH)CH3
Answer: Thus [tex]CH_3CH(OH)CH_3[/tex] is a secondary alkanol.
Explanation:
Alkanol are compounds which contains carbons bonded by single bonds and contains hydroxy (-OH) as functional group.
Primary alkanol are those compounds which contain hydroxyl group attached a carbon which is further attached to a single carbon atom. Example: [tex]CH_3CH_2CH_2OH[/tex] and [tex]CH_3CH_2CH_2CH_2OH[/tex]
Secondary alkanol are those compounds which contain hydroxyl group attached to a carbon which is further attached to two more carbon atoms.Example: [tex]CH_3CH(OH)CH_3[/tex]
Tertiary alkanol are those compounds which contain hydroxyl group attached to a carbon which is further attached to three more carbon atoms. Example: [tex]C(CH_3)_3OH[/tex]
Thus [tex]CH_3CH(OH)CH_3[/tex] is a secondary alkanol.
Attempt 1 of 1
Which of the following is most likely to have a crystalline structure?
wood
rubber
glass
quartz
Answer: Quartz
Explanation: I looked it up ;)
An aluminum can holds 350 mL of gas at 0 C and 1.0 atm. what is the new volume if the can is heated to 10 C and the pressure inside the can rises to 75 atm?
Answer:
Final volume of the gas is 4.837mL
Explanation:
Initial volume (V1) = 350mL = 0.35L
Initial temperature (T1) = 0°C = (0 + 273.15)k = 273.15k
Initial pressure (P1) = 1.0atm
Final volume (V2) = ?
Final temperature (T2) = 10°C = (10 + 273.15)k = 283.15K
Final pressure (P2) = 75atm
To solve this question, we'll have to use combined gas equation which is the combination of all gas law I.e Charle's laws, Boyle's law, Pressure law etc.
According to combined gas equation,
(P1 × V1) / T1 = (P2 × V2) / T2
Make V2 the subject of formula,
V2 = (P1 × V1 × T2) / (P2 × T1)
V2 = (1.0 × 0.35 × 283.15) / (75 × 273.15)
V2 = 99.1025 / 20,486.25
V2 = 0.004837L
V2 = 4.837mL
The final volume of the gas is 4.837mL
Answer:
4.84mL
Explanation:
Step 1:
Data obtained from the question. This include the following:
Initial volume (V1) = 350mL
Initial temperature (T1) = 0°C
Initial pressure (P1) = 1atm
Final temperature (T2) = 10°C
Final pressure (P2) = 75atm
Final volume (V2) =...?
Step 2:
Conversion of celsius temperature to Kelvin temperature.
This can be achieved by using the formula below:
T(K) = T (°C) + 273
Initial temperature (T1) = 0°C
Initial temperature (T1) = 0°C + 273 = 273K
Final temperature (T2) = 10°C
Final temperature (T2) = 10°C + 273 = 283K
Step 3:
Determination of the new volume.
The new volume can be obtained by using the general gas equation as follow:
P1V1/T1 = P2V2/T2
1 x 350/273 = 75 x V2/283
Cross multiply
273 x 75 x V2 = 1 x 350 x 283
Divide both side by 273 x 75
V2 = (1 x 350 x 283) / (273 x 75)
V2 = 4.84mL
Therefore, the new volume is 4.84mL
The ____ contains the highest concentration of ozone. (troposphere (exosphere ( stratosphere ( mesosphere
Answer:
the answer is stratosphere.
about 90% of ozone is found in the stratosphere.
Using a broom to clean sidewalks and driveways is a way to reduce water pollution.
Answer: Yes
Explanation:
Answer:
trueeeeee
Explanation:
I NEED HELP PLEASE, THANKS! :)
Respiration is a three-step process that breaks down glucose and produces ATP. What are those three steps? Explain.
Answer:
Ok so the first step is glycolysis(which involves 10 different 'steps') which is conducted in the cytosol, so this is where glucose breaks down into two molecules of pyruvate.
The breakdown of glucose releases energy which changes ADP to ATP and NAD+ to NADH.
The second step is commonly known as the Krebs Cycle or Citric Acid Cycle(involves 11 steps). This is where pyruvate is broken down into 3CO2.
The breakdown of pyruvate releases energy which changes ADP to ATP, NAD+ to NADH and FAD+ to FADH2
The third step is known as oxidative phosphorylation, this is where energy from NADH and FADH2 is used to generate a H+ gradient, which changes ADP to ATP.
Answer:
Glycolysis, Citric Acid Cycle, and the Electron Transport Chain
Explanation:
Cellular respiration is the process in which cells break down glucose and release the stored energy to make ATP.
Step 1 — Glycolysis
Glycolysis is the conversion of glucose — a C₆ molecule — into two C₃ (pyruvate) fragments.
Step 1a. The linking reaction — pyruvate oxidation
In preparation for the second step, each pyruvate ion loses a carbon atom as CO₂ and forms a two-carbon acetyl group.
The acetyl group is transferred to Coenzyme A to produce acetyl CoA.
Step 2 — the Citric Acid Cycle (CAC)
The acetyl CoA enters the CAC.
In various redox reactions, the C atoms in the acetyl group are oxidized to CO₂.
The electrons are passed to energy-storing molecules like NADH and FADH₂.
3. Step 3 — the Electron Transport Chain (ETC)
The NADH and FADH₂ pass their electrons to the Electron Transport Chain
In a series of redox reactions, the electrons reduce oxygen to water.
The energy released converts ADP to ATP (oxidative phosphorylation)
The whole purpose of respiration is to oxidize glucose to CO₂ and water and use the energy produced to form ATP.
One molecule of glucose produces 2 ATP in glycolysis, 2 in the CAC, and 34 in the ETC.
what is the difference between cells, tissues and organs
Answer:
A group of cells working together is defined as a tissue and several tissues working together comprise an organ.
Explanation:
What is the name of Al2(CO3)3 ?
Answer: Aluminum Carbonate
Explanation:
Answer:
Aluminum carbonate.
Explanation:
It is an aluminum salt form of carbonic acid.
__C7H16+ ___O2=
CO2 + H20 how to balance this equation
Answer:
C7H16 + 11O2 = 7CO2 + 8H2O
Explanation:
Start by balancing the C and H in C7H16 by adding the coefficient of 7 for CO2 because there are 7 C's in C7H16. Similarly, since there are 16 H's in C7H16, balance it by adding the coefficient of 8 to the H2O, which will result in 16 H's.
Finally, add up the O's on the right side and balance it by adding the appropriate coefficient on the O2. On the right, there are 22 O's, so balance the equation by adding the coefficient of 11 on the left for the O2.
And ironic bonds what happens to electrons? No
Answer:
metals donate electrons to nonsmetals
plsss answer this?? i need help
Answer:
85.34 g of oxygen
Explanation:
Carbon and Oxygen combine in ratio 3:8 to form CO2
Weight of C = 32g
3g of carbon reacts with 8g of oxygen
1g of carbon reacts with 8/3 g of oxygen
32 g of carbon reacts with 8/3 (32)
= 256/3
= 85.34 g of Oxygen
Hope it helps....
What is the definition of a scientific theory
A) A method of learning that emphasizes reason as the way to understand the world.
B) A brief statement that summarizes past observations and predicts future ones.
C) A model that explains the underlying reasons for observations and laws.
D) The equivalent of a scientific opinion which others may disagree with.
E) None of these.
Answer:
The correct answer to the following question will be Option C.
Explanation:
The theory seems to be the context within which findings are explained as well as possible predictions are made. This theoretical perspective discusses the factors behind the results as well as the laws.Theories have been used in scientific knowledge to give wide interpretations to accommodate observed facts in case the root reason is still yet to be found as well as characterized.So that Option C will be the right answer.
Describe one way in which uranium is disposed of.
Answer:
In the oxide form, uranium can be disposed of as low-level radioactive waste at an approved disposal facility. Approximately 350,000 tons of anhydrous HF are used annually in the United States.
Explanation:
let's consider the effectiveness of two antacids to illustrate how chemical calculations can be important in daily life. Baking soda NaHCO3, is often used as an antacid. It neutralizes excess hydrochloric acid sereted by stomach. The balanced equation for the reaction is NaHCO3(s)+HCl(aq)=H20(l)+CO2(g). Milk of magnesia, which is an aqueous suspension of magnesium hydroxide, Mg(OH)2(s)+2HCl(aq)=2H20(l)+MgCl2(aq), Which anatacid can consume the most stomach acid, 1.00g of NaHCO3,or 1.00g of Mg (OH)2?
Answer:
Milk of Magnesia would consume the most stomach acid at almost 3 times the amount as baking soda.
Explanation:
Baking Soda = NaHCO3(s)+HCl(aq)=H20(l)+CO2(g)
NaHCO3 Molar mass of 84.007 g/mol
0.012 Moles of NaHCO3 and since an equal ratio of HCl is required
we therefore neutralize 0.012 Moles of HCl
Milk of magnesia = Mg(OH)2(s)+2HCl(aq)=2H20(l)+MgCl2(aq)
Mg(OH)2(s) Molar mass: 58.3197 g/mol
0.017 Moles of Mg(OH)2 and the ratio is 2:1, so 2 moles for each 1 mole of Mg(OH)2, so we need 0.034 Moles of HCl
The energy from 0.015 moles of octane was used to heat 250 grams of water. The temperature of the water rose from 293.0 K to 371.2 K. What is the enthalpy of combustion of octane? The specific heat capacity of water is 4.18 J/K g.
A. -5448 kJ/mol
B. 1226 kJ/mol
C. -1226 kJ/mol
D. 293.25 kJ/mol
Answer:
A.) -5448 kJ/mol
Explanation:
I got it correct on founders edtell
Builders and dentists must store plaster of Paris,
CaSO4 x 1/2 H2O, in airtight containers to prevent it from
absorbing water vapor from the air and changing to
gypsum, CaSO4 x 2H2O How many liters of water
vapor evolve when 2.00 kg of gypsum are heated at
110°C to produce plaster of Paris? At 110°C, the
density of water vapor is 0.574 g/L.
In order to determine the amount of water that evaporates from we need to convert the mass into volume.
What temperate is required to produce the POP ?The builders and the density use the plaster of Paris called POP and are a CaSO4 x 1/2 H2O is used for the airtight containers to stop them from taking in water vapors from the air and changes into gypsum that is CaSO4 x 2H2O. The answer is given as below. Answer:
The plaster of Paris is used for coating the walls and the celling from the aspects of molding. Its also used for casting decorative elements.
It absorbs water from the air and vapor evolves when the 2.00 kg of gypsum is heated at 110 degrees. C.
Find out more information about the Builders and dentists.
brainly.com/question/14644606.
The diagram shows Niels Bohr’s model of an atom.
A small green circle labeled Proton is surrounded by 4 concentric circles. The space inside the first concentric circle is labeled N = 1; the space between the first and second circle is labeled N + = 2; between the second and third N = 3, and between the third and fourth N = 4. Oblong gray shapes labeled Electron appear on the second and third concentric circles.
What happens when the electron moves from the first energy level to the second energy level?
Energy is absorbed, and an emission line is produced.
Energy is released, and an emission line is produced.
Energy is absorbed by the atom.
Energy is lost from the atom.
Answer:
Energy is absorbed by the atom.
Explanation:
A certain man needed 400N of force to pull a load through a distance of 150cm in 8s . Calculatell i) the work done by man ii) the power developed by man
Answer:
a) 600 J
b) 75 W
Explanation:
Force= 400 N, distance = 150 cm = 1.5 m, time= 8s
a) Work is the product of force acting on an object and distance (or displacement). The S.I unit of work is the joules.
Work = force × distance = 400 × 1.5 = 600 J
b) Power is the amount of energy transferred per unit time. It is the ratio of work to time. The S.I unit of power is watt
Power = work/time = 600 / 8 = 75 W
Match each element to the correct description of its usual behavior in a chemical reaction.Silicon (Si)Argon (Ar)Sodium (Na)Will lose electrons
Answer:
Sodium (Na) — Will lose electrons
Silicon (Si) — Will lose electrons
Argon (Ar) — No reaction
Hope this helps.
Calculate the percentage of all elements in Fel(OH)3
Please help, I will mark the answer with brainlist...
Answer: 30.06% is your answer.
I hope this helps.
Stay safe and have a good day :D
The melting point of three solids X,Y and Z are 298K, 314 K and 398K respictively.Arrange these in increasing order of their inter particle force of attraction
Answer:
Explanation:
The higher the melting point of a substance, then the higher the force of attraction. Which means there is direct relationship between the melting point and force of attraction.
The increasing order of interparticle force of attraction of the the three particles are
Z(398) Y(314) X (298)
I.e Particle " Z " have highest melting point, follows by particle "Y" follows by particle "X
NOTE: The melting point of a substance refers to the
temperature whereby there there is a change from solid state to liquid state, it is dependent on the pressure of the system
In the movie bee movie how does the bee berry communicate
Answer:
they stick together as a group and that they berly fought or argue
Answer:first get a jar
Explanation:
Patrick that’s a jokers side special
Which is one way that topographic maps are different from other maps?
Answer:
The answer is A. Unlike other maps, topographic maps indicate man-made and natural landforms.
Explanation: Took the test and got 100% Edg. 2020
Answer:
A)Unlike other maps, topographic maps indicate man-made and natural landforms.
Explanation:
A(n) __________ can be added to milk to neutralize it.
Describe the differences seen in the properties of Boron and Nitrogen.
Answer:
Explanation:
As you move from left to right in periodic table the size of atom size decreases, electrongeativity increases.
it mean
Boron is bigger in size than Nitrogen
Boron is less electroneagive than Nitrogen.
can you find simialr to this another factor to realte
When 0.3 moles of acetylene is burned , total mole number of the products will be? a- 0.30 mol b-0.60 mol c-0.75 mol d-0.90 mol e- 1.2 mol
Answer:
d. 0.9 mol
Explanation:
On this case we have to start with the formula of acetylene:
[tex]C_2H_2[/tex]
Now we can write the chemical reaction of combustion:
[tex]C_2H_2~+~O_2~->~CO_2~+~H_2O[/tex]
The next step is to balance the reaction:
[tex]2C_2H_2~+~5O_2~->~4CO_2~+~2H_2O[/tex]
The molar ratio between [tex]C_2H_2[/tex] and [tex]CO_2[/tex] is 2:4, so:
[tex]0.3~mol~C_2_H_2\frac{4~mol~CO_2}{2~mol~C_2H_2}=0.6~mol~CO_2[/tex]
The molar ratio between [tex]C_2H_2[/tex] and [tex]H_2O[/tex] is 2:2, so:
[tex]0.3~mol~C_2_H_2\frac{2~mol~H_2O}{2~mol~C_2H_2}=0.3~mol~H_2O[/tex]
The total moles would 0.6 + 0.3=0.9 moles.
I hope it helps!
what will happen if we burn carbon monoxide In a closed room??
Answer:
the carbon monoxide will release blue fumes