A rifle can shoot a 4.00 g bullet at a speed of 998 m/s. Find the kinetic energy of the bullet. What work is done on the bullet if it starts from rest?​

Answer:

I think c I dont know sorry if I'm wrong

Answer:

239 rpm

Explanation: So the distance covered in one minute is 75,000 centimeters. The diameter of the wheel is 100 cm, so the radius is 50 cm, and the circumference is 100π cm. How many of these circumferences (or wheel revolutions) fit inside the 75,000 cm? In other words, if I were to peel this wheel's tread from the cart and lay it out flat, it would measure a distance of 100π cm. How many of these lengths fit into the entire distance covered in one minute? To find out how many of (this) fit into so many of (that), I must divide (that) by (this), so:

100πcm/rev

75,000cm/min

​750 min rev≈238.7324146RPM

Answer:

The final speed will be "[tex]1.185\times 10^7 \ m/sec[/tex]".

Explanation:

The given values are:

Potential difference,

Δv = 400 v

Radius,

r = 0.5580 cm

As we know,

⇒  [tex]W=e \Delta v[/tex]

and,

⇒  [tex]\frac{1}{2}mv^2=e \Delta v[/tex]

then,

⇒  [tex]v=\sqrt{\frac{2e \Delta v}{m} }[/tex]

On substituting the values, we get

⇒     [tex]=\sqrt{\frac{2\times 1.6\times 10^{-19}\times 400}{9.11\times 10^{-31}} }[/tex]

⇒     [tex]=\sqrt{\frac{1.6\times 10^{-19}\times 800}{9.11\times 10^{-31}}}[/tex]

⇒     [tex]=1.185\times 10^7 \ m/sec[/tex]

Answer: 550 cm

Explanation:

Original equation: 1/f= 1/do + 1/di.

F=50.0 cm, and do=55.0.

Since we don't have di, we'll have to subtract do to the other side, making the equation: 1/f - 1/do= 1/di.

Doing the math, 1/f - 1/do is 0.0018181818

Then to get di by itself, you multiply both sides by di. Then you divide by 0.0018181818 to get di by itself. You then get: di= 1/0.0018181818

At that point, you just divide 1 by 0.0018181818, which will give you 550 cm

There could be simpler way, but that is just what I did to get the answer. Answer was right on Acellus

Answer:

D

Explanation:

its D

Answer:

c. Double Replacement

Explanation:

As in Double Replacement reaction exchanges the cations (or the anions) of two ionic compounds.

Here, in BaCl2 , Ba has replaced with NO3 to form Ba(NO3)2

and in 2AgNo3 , Ag has replaced with Cl to form 2AgCl.

Answer:

1.48×10⁻⁷ Newtons

Explanation:

From the question,

According to newton's law of universal gravitation.

F = Gmm'/r²........................ Equation 1

F = gravitational force, G = gravitational constant, m = mass of the first ball, m' = mass of the second ball, r = distance between the balls.

Given: m = m' = 8 kg, r = 17 cm = 0.17 m,

Constant : G = 6.67×10⁻¹¹ Nm²/kg²

Substitute these values into equation 1

F =  (6.67×10⁻¹¹×8×8)/(0.17²)

F = 1.48×10⁻⁷ N

Answer:

[tex]0.842\ \text{lb ft}[/tex]

[tex]0.1052\ \text{lb ft}[/tex]

Explanation:

d = Diameter of wheel = 6 in

r = Radius = 3 in = [tex]\dfrac{3}{12}=0.25\ \text{ft}[/tex]

t = Thickness = [tex]\dfrac{3}{4}=0.75\ \text{in}=\dfrac{0.75}{12}\ \text{ft}[/tex]

w = Specific weight = [tex]425\ \text{lb/ft}^3[/tex]

[tex]t_2[/tex] = Time taken to slow down = 35 s

[tex]t_1[/tex] = Time taken to reach operating speed = 5 s

[tex]\omega[/tex] = Angular velocity = [tex]3450\times \dfrac{2\pi}{60}\ \text{rad/s}[/tex]

Weight is given by

[tex]W=2\pi r^2tw\\\Rightarrow W=2\pi\times 0.25^2\times \dfrac{0.75}{12}\times 425\\\Rightarrow W=10.43\ \text{lbs}[/tex]

Mass is given by

[tex]m=\dfrac{W}{g}\\\Rightarrow m=\dfrac{10.43}{32}\\\Rightarrow m=0.326\ \text{lb}[/tex]

Moment of inertia is given by

[tex]I=\dfrac{mr^2}{2}\\\Rightarrow I=\dfrac{0.326\times 0.25^2}{2}\\\Rightarrow I=0.01019\ \text{lb ft}^2[/tex]

Angular acceleration while slowing down is given by

[tex]\alpha_f=\dfrac{\omega}{t_2}\\\Rightarrow \alpha_f=\dfrac{3450\times \dfrac{2\pi}{60}}{35}\\\Rightarrow \alpha_f=10.32\ \text{rad/s}^2[/tex]

Frictional moment is given

[tex]\tau_f=I\alpha_f\\\Rightarrow \tau_f=0.01019\times 10.32\\\Rightarrow \tau_f=0.1052\ \text{lb ft}[/tex]

Frictional moment is [tex]0.1052\ \text{lb ft}[/tex]

Angular acceleration while speeding up is given by

[tex]\alpha=\dfrac{\omega}{t_1}\\\Rightarrow \alpha=\dfrac{3450\times \dfrac{2\pi}{60}}{5}\\\Rightarrow \alpha=72.26\ \text{rad/s}^2[/tex]

Motor torque is given by

[tex]\tau_m=\tau_f+I\alpha\\\Rightarrow \tau_m=0.1052+0.01019\times 72.26\\\Rightarrow \tau_m=0.842\ \text{lb ft}[/tex]

Motor torque is [tex]0.842\ \text{lb ft}[/tex].

Answer:

6.26 m/s

Explanation:

Since we are neglecting viscous losses and surface tension effects in the liquid jet, by conservation of energy, the potential energy loss of the jet = kinetic energy gain of the jet

So, mgh = 1/2mv² where m = mass of water in jet, g = acceleration due to gravity = 9.8 m/s², h = height of outlet = 2.0 mand v = velocity of liquid jet

So, mgh = 1/2mv²

gh = 1/2v²

v² = 2gh

v = √(2gh)

v = √(2 × 9.8 m/s² × 2.0 m)

v = √(39.2 m²/s²)

v = 6.26 m/s

Answer:

I assume they want answer A, but it's a silly question.

Explanation:

Well, if we assume that the girls are applying equal force, as they are the same size and strength (apparently also the same resolve etc.).

Equal force in opposite directions means the composite force is null. An object that no force is applied to continues moving in the same direction, so if the doll was moving somewhere, it would keep doing so, except all of this makes no sense the doll is not in gravityless vacuum what are we even talking about.

The answer A is the least ridiculous.

Answer:

230.4 N

Explanation:

From the question given above, the following data were obtained:

Charge (q) of each protons = 1.6×10¯¹⁹ C

Distance apart (r) = 1×10¯¹⁵ m

Force (F) =?

NOTE: Electric constant (K) = 9×10⁹ Nm²/C²

The force exerted can be obtained as follow:

F = Kq₁q₂ / r²

F = 9×10⁹ × (1.6×10¯¹⁹)² / (1×10¯¹⁵)²

F = 9×10⁹ × 2.56×10¯³⁸ / 1×10¯³⁰

F = 2.304×10¯²⁸ / 1×10¯³⁰

F = 230.4 N

Therefore, the force exerted is 230.4 N

Answer:

230.4

Explanation:

acellus

Answer:

Earth Day is observed globally

Explanation:

Answer:

[tex]3.49\times 10^{-8}\ \Omega\text{m}[/tex]

Explanation:

r = Radius = [tex]\dfrac{2}{2}=1\ \text{mm}[/tex]

B = Magnetic field = 3 mT

1 mm = Distance from the surface of the wire

V = Voltage

x = Distance from the probe = [tex]r+1=1+1=2\ \text{mm}[/tex]

R = Resistance

L = Length of wire = 4.5 m

Magnetic field is given by

[tex]B=\dfrac{\mu_0I}{2\pi x}\\\Rightarrow I=\dfrac{B2\pi x}{\mu_0}\\\Rightarrow I=\dfrac{3\times 10^{-3}\times 2\times \pi 2\times 10^{-3}}{4\pi 10^{-7}}\\\Rightarrow I=30\ \text{A}[/tex]

Voltage is given by

[tex]V=IR\\\Rightarrow R=\dfrac{V}{I}\\\Rightarrow R=\dfrac{1.5}{30}\\\Rightarrow R=0.05\ \Omega[/tex]

Resistivity is given by

[tex]\rho=\dfrac{RA}{L}\\\Rightarrow \rho=\dfrac{0.05\times \pi (1\times 10^{-3})^2}{4.5}\\\Rightarrow \rho=3.49\times 10^{-8}\ \Omega\text{m}[/tex]

The resistivity of the material is [tex]3.49\times 10^{-8}\ \Omega\text{m}[/tex].

Answer:

Explained below.

Explanation:

We are told that the surface material is ejected into space at a high speed. This means that it will have a likely high momentum as well.

Now, we can say that the total momentum is conserved because the entire asteroid system behaves like an isolated system.

Also, as the surface material is moving with the high momentum like we established earlier, it will cause the asteroid to move with a speed in an opposite direction which also means deflection in an opposite direction.

Answer:

Explained below.

Explanation:

The material ejected from the surface of the asteroid would have a significant momentum. Since the asteroid and all its material is an isolated system, the ejection would cause an oppositely directed change in momentum of the asteroid, according to the law of conservation of momentum.

The ejected material is analogous to gases expelled from a rocket, and the asteroid is analogous to a rocket.

Answer:

6 - iron

7 - by stringing many magnets together

Explanation:

6 - substances such as iron, cobalt, and nickel, most of the electrons spin in the same direction. This makes the atoms in these substances strongly magnetic—but they are not yet magnets. ... The piece of iron has become a magnet. Some substances can be magnetized by an electric current.

7 - it is that only

Answer:

v = 2.91 m/s

Explanation:

Given that,

A kayaker is paddling south at 2.50 m/s, and encounters a weird current moving 1.15 m/s west.

We need to find the resultant velocity. Both velocities are perpendicular to each other. So,

[tex]v=\sqrt{v_1^2+v_2^2} \\\\=\sqrt{2.5^2+1.5^2} \\\\=2.91\ m/s[/tex]

So, the magnitude of the resultant velocity is equal to 2.91 m/s.

Answer:

the electric field strength inside the resistor is 2.57 V/m

Explanation:

Given;

current flowing through the wire, I = 1.10 A

resistance of the wire, R = 7.00 Ω

length of the wire, L = 3.00 m

The emf created inside the resistor is calculated as;

V = IR

V = 1.10 x 7

V = 7.7 V

The electric field strength inside the resistor is calculated as;

E = V/L

E = 7.7 / 3

E = 2.57 V/m

Therefore, the electric field strength inside the resistor is 2.57 V/m

Answer:

20.0N

Becuase It's the largest

Answer:

20.0

Explanation:

It's the biggest number

Answer:

A. The water

Explanation:

i got it right on A-P-E-X

Answer:

Explanation:

Point of zero velocity are extreme points situated on either side of equilibrium position .

a )

Time taken to travel between these two points is .15 s

time for half the oscillation = .15 s

Time for full one oscillation = .30 s .

Time period of oscillation = .30 s

b)

frequency = 1 / time period

= 1 / .30s = 3.33 oscillation per second.

c )

Distance between these two point is equal to two times amplitude

2 x amplitude = 30 cm

amplitude = 15 cm

A 4.0 kg block is moving at 5.0 m/s along a horizontal frictionless surface toward an ideal spring that is attached to a wall, the maximum speed of the block when the spring is compressed to one-half of the maximum distance is 4.33 m/s

From the conservation of energy; the kinetic energy of the mass is equal to the work done on the spring.

i.e.

[tex]\mathbf{\dfrac{1}{2} mv^2 = \dfrac{1}{2}kx^2_{max}}[/tex]

Given that:

∴

From the equation above, multiplying both sides with 2, we have:

[tex]\mathbf{mv^2 =kx^2_{max}}[/tex]

Making (k) the subject of the formula;

[tex]\mathbf{k = \dfrac{mv^2}{x^2_{max}}}[/tex]

[tex]\mathbf{k = \dfrac{4 \times 5^2}{0.68^2}}[/tex]

k = 216.26 N/m

However, when compressed to one-half of the maximum distance; the speed is computed as follows:

x = 0.68/2 = 0.34 m

∴

[tex]\mathbf{\dfrac{1}{2}mv_o^2 - \dfrac{1}{2}mv^2 = \dfrac{1}{2}kx^2}[/tex]

[tex]\mathbf{m(v_o^2 -v^2) =kx^2}[/tex]

[tex]\mathbf{(v_o^2 -v^2) =\dfrac{kx^2}{m}}[/tex]

[tex]\mathbf{(5^2 -v^2) =\dfrac{216.26 \times 0.34^2}{4.0}}[/tex]

25 - v² = 6.25

25 -6.25 = v²

v² = 18.75

[tex]\mathbf{ v= \sqrt{18.75 }}[/tex]

v = 4.33 m/s

Therefore, we can conclude that the speed of the block when the spring is compressed to only one-half of the maximum distance is 4.33 m/s

Learn more about speed here:

https://brainly.com/question/22610586?referrer=searchResults

Answer:

I know you said not to do this but I am doing a challenge and You asked this an hour ago. PLS DON'T REPORT ME.

Explanation: Sorry

Answer:

the answer is A

I wish you a good day!

Answer:

THe answer is graph 2 as it represents the puck going in a linear motion

Explanation:

Answer:

C. Amount of oxygen

Explanation:

Options A and D are invalid as they aren't affecting factors.

Option B is false as the altitude increases as you go up a mountain.

Option C is true as the air pressure (atmospheric pressure) is inversely proportional to the height/altitude of the mountain.

Answer:

The current in the new circuit is 0

Explanation:

A diode is an electronic component that allows the electric current to go only in one direction. If in the first case the current was 255 mA, and the battery was changed ( change in polarity ) no current will flow through the circuit. That change is similar or equivalent to change the diode to the no pass position

Answer:

The third approach to cross-cultural studies of personality is the combined approach, which serves as a bridge between Western and indigenous psychology as a way of understanding both universal and cultural variations in personality

Explanation:

Answer:

The third approach to cross-cultural studies of personality is the combined approach, which serves as a bridge between Western and indigenous psychology as a way of understanding both universal and cultural variations in personality