A driver wearing a seat beat decelerates at roughly the same rate as the car it self. Since many modern cars have a "crumble zone" built into the front of the car, let us assume that the car decelerates of a distance of 0.9 m. What is the net force acting on a 65 kg driver who is driving at 18 m/sec and comes to rest in this distance

Answers

Answer 1

Answer:

11,700Newton

Explanation:

According to Newton's second law, Force = mass × acceleration

Given mass = 65kg.

Acceleration if the car can be gotten using one of the equation of motion as shown.

v² = u²+2as

v is the final velocity = 18m/s

u is the initial velocity = 0m/s

a is the acceleration

s is the distance travelled = 0.9m

On substitution;

18² = 0²+2a(0.9)

18² = 1.8a

a = 324/1.8

a = 180m/²

Net force acting on the body = 65×180

Net force acting on the body = 11,700Newton


Related Questions

A 54.0 kg ice skater is gliding along the ice, heading due north at 4.10 m/s . The ice has a small coefficient of static friction, to prevent the skater from slipping sideways, but Uk = 0. Suddenly, a wind from the northeast exerts a force of 3.70 N on the skater.a) Use work and energy to find the skater's speed after gliding 100 m in this wind.b) What is the minimum value of Ug that allows her to continue moving straight north?

Answers

Answer:

a. 2.668 m/s

b. 0.00494

Explanation:

The computation is shown below:

a. As we know that

[tex]W = F\times d[/tex]

[tex]KE = 0.5\times m\times v^2[/tex]

As the wind does not move the skater to the east little work is performed in this direction. All the work goes in the direction of the N-S. And located in that direction the component of the Force.

F = 3.70 cos 45 = 2.62 N

[tex]W = F \times d = 2.62 N \times 100 m[/tex]

[tex]W = 261.6 N\times m[/tex]

We know that

KE1 = Initial kinetic energy

KE2 = kinetic energy following 100 m

The energy following 100 meters equivalent to the initial kinetic energy less the energy lost to the work performed by the wind on the skater.

So, the equation is

KE2 = KE1 - W

[tex]0.5 m\times v2^2 = 0.5 m\ v1^2 - W[/tex]

Now solve for v2

[tex]v2 = \sqrt{v1^2 - {\frac{2W}{M}}}[/tex]

[tex]= \sqrt{4.1 m/s)^2 - \frac{2 \times 261.6 N\times m}{54.0 kg}}[/tex]

= 2.668 m/s

b. Now the minimum value of Ug is

As we know that

Ff = force of friction

Us = coefficient of static friction

N = Normal force = weight of skater

So,

[tex]Ff = Us\times N[/tex]

Now solve for Us

[tex]= \frac{Ff}{N}[/tex]

[tex]= \frac{3.70 N \times cos 45 }{54.0 kg \times 9.81 m/s^2}[/tex]

= 0.00494

In a 2 dimensional Cartesian system, the x-component of a vector is known, and the angle between vector and x-axis is known. Which operation is used to calculate the magnitude of the vector? (taken with respect to the x-component)
a. dividing by cosine
b. dividing by sine
c. multiplying by cosine
d. multiplying by sine

Answers

Answer:

The correct answer is a

Explanation:

The cosine function is

      cos θ = ca / ​​H

done ca is the adjacent leg (x-axis) and H is the hypotenuse (vector module)

we clear

    H = ca / ​​cos θ

therefore, to find the magnitude of the vector, the cathete is divided into the cosine.

The correct answer is a

A quartz sphere is 14.0 cm in diameter. What will be its change in volume if its temperature is increased by 305°F? The coefficient of volume expansion of quartz is 1.50×10^6/°C. Answer in cm^3 .

Answers

Answer:

  0.365 cm³

Explanation:

The change in volume is found by multiplying the coefficient of expansion by the volume and the temperature change. The temperature change is in °F, but the expansion coefficient is per °C, so we need to convert the temperature scale in the computation.

  ΔV = V·Ce·ΔT

  = (π/6·d³)(1.5×10⁻⁶/°C)((5 °C)/(9 °F))(305 °F)

  = (1436.76 cm³)(1.5×10⁻⁶/°C)(169.44 °C)

  = 0.365 cm³ . . . . increase in volume

An alpha particle has a charge of +2e and a mass of 6.64 x 10-27 kg. It is accelerated from rest through a potential difference of 1.2 x 106 V and then enters a uniform magnetic field whose strength is 2.2 T. The alpha particle moves perpendicular to the field. Calculate (a) the speed of the alpha particle, (b) the magnitude of the magnetic force exerted on it, and (c) the radius of its circular path.

Answers

Answer:

a) v = 1.075*10^7 m/s

b) FB = 7.57*10^-12 N

c) r = 10.1 cm

Explanation:

(a) To find the speed of the alpha particle you use the following formula for the kinetic energy:

[tex]K=qV[/tex]          (1)

q: charge of the particle = 2e = 2(1.6*10^-19 C) = 3.2*10^-19 C

V: potential difference = 1.2*10^6 V

You replace the values of the parameters in the equation (1):

[tex]K=(3.2*10^{-19}C)(1.2*10^6V)=3.84*10^{-13}J[/tex]

The kinetic energy of the particle is also:

[tex]K=\frac{1}{2}mv^2[/tex]       (2)

m: mass of the particle = 6.64*10^⁻27 kg

You solve the last equation for v:

[tex]v=\sqrt{\frac{2K}{m}}=\sqrt{\frac{2(3.84*10^{-13}J)}{6.64*10^{-27}kg}}\\\\v=1.075*10^7\frac{m}{s}[/tex]

the sped of the alpha particle is 1.075*10^6 m/s

b) The magnetic force on the particle is given by:

[tex]|F_B|=qvBsin(\theta)[/tex]

B: magnitude of the magnetic field = 2.2 T

The direction of the motion of the particle is perpendicular to the direction of the magnetic field. Then sinθ = 1

[tex]|F_B|=(3.2*10^{-19}C)(1.075*10^6m/s)(2.2T)=7.57*10^{-12}N[/tex]

the force exerted by the magnetic field on the particle is 7.57*10^-12 N

c) The particle describes a circumference with a radius given by:

[tex]r=\frac{mv}{qB}=\frac{(6.64*10^{-27}kg)(1.075*10^7m/s)}{(3.2*10^{-19}C)(2.2T)}\\\\r=0.101m=10.1cm[/tex]

the radius of the trajectory of the electron is 10.1 cm

The speed, magnetic force and radius are respectively; 10.75 * 10⁶ m/s; 7.57 * 10⁻¹² N; 0.101 m

What is the Magnetic force?

A) We know that the formula for kinetic energy can be expressed as;

K = qV

where;

q is charge of the particle = 2e = 2(1.6 × 10⁻¹⁹ C) = 3.2 × 10⁻¹⁹ C

V is potential difference = 1.2 × 10⁶ V

K = 3.2 × 10⁻¹⁹ *  1.2 × 10⁶

K = 3.84 × 10⁻¹³ J

Also, formula for kinetic energy is;

K = ¹/₂mv²

where v is speed

Thus;

v = √(2K/m)

v = √(2 * 3.84 × 10⁻¹³)/(6.64 * 10⁻²⁷)

v = 10.75 * 10⁶ m/s

B) The magnetic force is given by the formula;

F_b = qvB

F_b = (3.2 × 10⁻¹⁹ * 10.75 * 10⁶ * 2.2)

F_b = 7.57 * 10⁻¹² N

C) The formula to find the radius is;

r = mv/qB

r = (6.64 * 10⁻²⁷ * 10.75 * 10⁶)/(1.6 × 10⁻¹⁹ * 2.2)

r = 0.101 m

Read more about magnetic field at; https://brainly.com/question/7802337

Write the first equation of motion. Under what condition(s) is this equation valid?​

Answers

Explanation:

The first equation of motion in kinematics is given by :

[tex]v=u+at[/tex] .....(1)

u is initial speed

a is acceleration

v is final speed

t is time

Equation (1) is valid when the object is moving with constant acceleration. This equation gives relation between velocity and time.

. A ball weighs 120g on the earth surface,

i) What is its mass on the surface of the moon? 1mk

Answers

Answer:

WEIGHT ON MOON IS 0.2004N

Explanation:

mass of the body=120g=[tex]\frac{120}{1000}[/tex]kg=0.12kg (we will convert g into kg)

gravity on moon=1.67m/s²( to find the mass of anybody on another we should know its gravity)

as we know that (from the formula of weight)

weight=mass×gravity

w=mg

w=0.12kg²×1.67m/s²

w=0.2004N

The NASA spacecraft Deep Space I was shut down on December 18, 2001, following a three-year journey to the asteroid Braille and the comet Borrelly. This spacecraft used a solar-powered ion engine to produce 0.064 ounces of thrust (force) by stripping electrons from neon atoms and accelerating the resulting ions to 70,000 mi/h. The thrust was only as much as the weight of a couple sheets of paper, but the engine operated continuously for 16,000 hours. As a result, the speed of the spacecraft increased by 7900 mi/h. What was the mass of Deep Space I?

Answers

Answer:

The mass will be "8.86 lb".

Explanation:

The given values are:

Force

= 70,000 mi/h

Speed

= 7900 mi/h

On applying the Law of momentum, we get

⇒  [tex]V_{1}m_{1}=V_{2}m_{2}[/tex]

On putting the estimated values, we get

⇒  [tex]70000 = 7900\times mass \ of \ deepspace \ 1[/tex]

⇒  [tex]mass \ of \ deepspace \ 1 = \frac{70000}{7900}[/tex]

⇒                                    [tex]=8.86 \ lb[/tex]

A population _____ follows a period of

Answers

A population decline follows a period of overshooting.

Answer:

a population increase

Explanation:

During the 20th century, the world population increased from 1.65 billion to 6 billion. In 1970, the world's population was half that of today. In less than 15 years, 47% of the population will live in areas already under heavy water stress. In Africa, between 75 and 250 million people will face growing shortages in 2020 due to climate change. The scarcity of some arid and semi-arid regions will have a decisive impact on migration.

An object is thrown vertically and has an upward velocity of 18 m/s when it reaches one fourth of its maximum height above its launch point. What is the initial (launch) speed of the object

Answers

Answer:

v = 25.45 m/s

Explanation:

In order to calculate the initial speed of the object, you take into account the formula for the maximum height reaches by the object. Such a formula is given by:

[tex]h_{max}=\frac{v_o^2}{g}[/tex]   (1)

vo: initial speed of the object = 18 m/s

g: gravitational acceleration = 9.8 m/s²

Furthermore you use the following formula for the final speed of the object:

[tex]v^2=v_o^2-2gh[/tex]       (2)

h: height

You know that the speed of the object is 18m/s when it reaches one fourth of the maximum height. You use this information, and you replace the equation (1) in to the equation (2), as follow:

[tex]v^2=v_o^2-2g(\frac{h_{max}}{4})=v_o^2-\frac{1}{2}g(\frac{v_o^2}{g})\\\\v^2=v_o^2-\frac{1}{2}v_o^2=\frac{1}{2}v_o^2[/tex]

Then, you solve the previous result for vo:

[tex]v_o=\sqrt{2}v=\sqrt{2}(18m/s)=25.45\frac{m}{s}[/tex]

The initial speed of the object was 25.45 m/s

A worker pushes on a crate that experiences a net force of 45.0 N. If it accelerates at 0.500 m/s2 what is the weight?

Answers

Answer:

882 N

Explanation:

F = ma

45.0 N = m (0.500 m/s²)

m = 90.0 kg

mg = 882 N

A 9.0-V battery (with nonzero resistance) and switch are connected in series across the primary coil of a transformer. The secondary coil is connected to a light bulb that operates on 120 V. Determine the ratio of the secondary to primary turns needed for the bells transformer. Determine the ratio of the secondary to primary turns needed for the bells transformer. Ns/Np=?

Answers

Answer:

N₂ / N₁ = 13.3

Explanation:

A transformer is a system that induces a voltage in the secondary due to the variation of voltage in the primary, the ratio of voltages is determined by the expression

           ΔV₂ = N₂ /N₁  ΔV₁

where ΔV₂ and ΔV₁ are the voltage in the secondary and primary respectively and N is the number of windings on each side.

In this case, they indicate that the primary voltage is 9.0 V and the secondary voltage is 120 V

therefore we calculate the winding ratio

         ΔV₂ /ΔV₁ = N₂ / N₁

         N₂ / N₁ = 120/9

         N₂ / N₁ = 13.3

s good clarify that in transformers the voltage must be alternating (AC)

Blocks of mass 10, 30, and 90 kg are lined up from left to right in that order on a frictionless surface so each block is touching the next one. A rightward-pointing force of magnitude 32 N is applied to the left-most block. 1) What is the magnitude of the force that the left block exerts on the middle one

Answers

Answer:

32N

Explanation:

The Left force exerts an opposite horizontal force of 32N on the middle object

An underwater diver sees the sun at an apparent angle of 45.00 from the vertical. How far is the sun above the horizon? [n in water=1.333

Answers

Answer:

19.872 degrees

Explanation:

Mathematically;

Using Snell’s law

n1 sin A = n2 sinB

Where ;

n1 = refractive index in air = 1

n2 is refractive index in water = 1.33

A = ?

B = 45

Substituting the values in the equation;

1 sin A = 1.33 sin45

Sin A = 1.33 sin 45

A = arc sin (1.33 sin 45)

A = 70.12

Thus, the actual direction of the Sun with respect to the horizon = 90-A = 19.872 degrees

How do you convert 1.3*10^6cal into joules

Answers

Answer:

5.4×10⁶J

Explanation:

1 cal = 4.184 J

1.3×10⁶ cal × (4.184 J/cal) = 5.4×10⁶J

Volume of an block is 5 cm3. If the density of the block is 250 g/cm3, what is the mass of the block ?​

Answers

Answer:

The mass of the block is 1250g.

Explanation:

Given that the formula for density is ρ = mass/volume. Then you have to substitute the values into the formula :

[tex]ρ = \frac{mass}{volume} [/tex]

Let density = 250,

Let volume = 5,

[tex]250 = \frac{m}{5} [/tex]

[tex]m = 250 \times 5[/tex]

[tex]m = 1250g[/tex]

A 1000-kg car is driving toward the north along a straight horizontal road at a speed of 20.0 m/s. The driver applies the brakes and the car comes to a rest uniformly in a distance of 240 m. What are the magnitude and direction of the net force applied to the car to bring it to rest?

Answers

Answer:

The value of F= - 830 N

Since the force is negative, it implies direction of the force applied was due south.

Explanation:

Given data:

Mass = 1000-kg

Distance, d = 240 m

Initial velocity, v1 = 20.0 m/s

Final velocity, v2 = 0 (since the car came to rest after brake was applied)

v2²= v1² + 2ad (using one of the equation of motion)

0=  20² + (2 x a x  240)

0= 400 + 480 a

a = - 400/480

a = - 0.83 m/s²

Then, imputing the value of a into

F = ma

F = 1000 kg x ( - 0.83 m/s²)

F= - 830 N

The car was driving toward the north, and since the force is negative, it implies direction of the force applied was due south.

someone please help me out thanks

Answers

Answer:
Theory

Explanation:
The scientific form that is used to describe a testable model that seeks to explain natural phenomena is called theory.

Answer:

The answer is D)Theory

Explanation:

This is due because a theory is a scientific term and is a testable model that scientists seek to explain a phenomenon. You can also find out the answer by the process of elimination it can't be data because that would be something they already know and something they use to prove not explain. It can't be law because it isn't testable but can be used to explain. So that leaves you with two answers hypothesis and theory which are very similar but it isn't hypothesis because it isn't used to explain it to help the scientists come up with a theory and accumulate what might happen.

Problem 3A solid uniform sphere of mass 120 kg and radius 1.7 m starts from rest and rolls without slipping down an inclined plane of vertical height 5.3 m. What is the angular speed of the sphere at the bottom of the inclined plane

Answers

Answer:

5.1 rad/s

Explanation:

Mechanical energy of the system is conserved since no external work is done on the sphere.

[tex]mgh = mv^2/2 + I\omega^2/2[/tex]

Substituting v = ωr and I = 2 m r^2/5, we get,

=> [tex]mgh=m(\omega r)^2/2 + (2\omega r^2/5)\omega^2/2[/tex]

=> [tex]mgh = m\omega^2r^2/2 + m\omega^2r^2/5[/tex]

=> [tex]gh =\omega^2r^2/2+\omega^2r^2/5[/tex]

=>  [tex]gh = 7\omega^2 r^2/10[/tex]

=>  [tex]\omega r = (10gh/7)^{1/2}[/tex]

=> [tex]\omega = (1/r)(10gh/7)^{1/2} = (1 / 1.7)(10\times 9.8\times 5.3 / 7)^{1/2}[/tex] = 5.1 rad/s

Space-faring astronauts cannot use standard weight scales (since they are constantly in free fall) so instead they determine their mass by measuring the period of oscillation when sitting in a chair connected to a spring. Suppose a chair is connected to a spring with a spring constant of 600 N/m. If the empty chair oscillates with a period of 0.9s, what is the mass of an astronaut who oscillates with a period of 2.0 s while sitting in the chair

Answers

Answer:

ma = 48.48kg

Explanation:

To find the mass of the astronaut, you first calculate the mass of the chair by using the information about the period of oscillation of the empty chair and the spring constant. You use the following formula:

[tex]T=2\pi\sqrt{\frac{m_c}{k}}[/tex]     (1)

mc: mass of the chair

k: spring constant = 600N/m

T: period of oscillation of the chair = 0.9s

You solve the equation (1) for mc, and then you replace the values of the other parameters:

[tex]m_c=\frac{T^2k}{4\pi^2}=\frac{(0.9s)^2(600N/m)}{4\pi^2}=12.31kg[/tex]    (2)

Next, you calculate the mass of the chair and astronaut by using the information about the period of the chair when the astronaut is sitting on the chair:

T': period of chair when the astronaut is sitting = 2.0s

M: mass of the astronaut plus mass of the chair = ?

[tex]T'=2\pi\sqrt{\frac{M}{k}}\\\\M=\frac{T'^2k}{4\pi^2}=\frac{(2.0s)^2(600N/m)}{4\pi^2}\\\\M=60.79kg[/tex] (3)

Finally, the mass of the astronaut is the difference between M and mc (results from (2) and (3)) :

[tex]m_a=M-m_c=60.79kg-12.31kg=48.48kg[/tex]

The mass of the astronaut is 48.48 kg

A rifle fires a 2.05 x 10-2-kg pellet straight upward, because the pellet rests on a compressed spring that is released when the trigger is pulled. The spring has a negligible mass and is compressed by 8.01 x 10-2 m from its unstrained length. The pellet rises to a maximum height of 4.46 m above its position on the compressed spring. Ignoring air resistance, determine the spring constant.

Answers

Answer:

Spring Constant = 279.58 N/m

Explanation:

We are given;

Mass; m = 2.05 x 10^(-2) kg = 0.0205 kg

Distance of compression; x = 8.01 × 10^(-2) m = 0.0801 m

Maximum height; h = 4.46 m

The formula for the energy in the spring is given by;

E = ½kx²

where:

k is the spring constant

x is the distance the spring is compressed.

Now, this energy of the spring will be equal to the energy of the pellet at its highest point. Energy of pallet = mgh So;

½kx² = mgh

Plugging in the relevant values, we have;

½ * k * 0.0801² = 0.0205 * 9.81 * 4.46

0.003208005k = 0.8969

k = 0.8969/0.003208005

k = 279.58 N/m

the part of the brain stem called the has been shown to related to arousal in lab animals. when this part is stimulated the animal is awake when it is severed cut the animal goes into coma

Answers

Answer:

Its called PSY

Explanation: I so do not know why they named it this way but, hope i helped.

A flock of ducks is trying to migrate south for the winter, but they keep being blown off course by a wind blowing from the west at 5.0 m/s . A wise elder duck finally realizes that the solution is to fly at an angle to the wind.If the ducks can fly at 7.0 m/s relative to the air, what direction should they head in order to move directly south?

Answers

The ducks' flight path as observed by someone standing on the ground is the sum of the wind velocity and the ducks' velocity relative to the wind:

ducks (relative to wind) + wind (relative to Earth) = ducks (relative to Earth)

or equivalently,

[tex]\vec v_{D/W}+\vec v_{W/E}=\vec v_{D/E}[/tex]

(see the attached graphic)

We have

ducks (relative to wind) = 7.0 m/s in some direction θ relative to the positive horizontal direction, or

[tex]\vec v_{D/W}=\left(7.0\dfrac{\rm m}{\rm s}\right)(\cos\theta\,\vec\imath+\sin\theta\,\vec\jmath)[/tex]

wind (relative to Earth) = 5.0 m/s due East, or

[tex]\vec v_{W/E}=\left(5.0\dfrac{\rm m}{\rm s}\right)(\cos0^\circ\,\vec\imath+\sin0^\circ\,\vec\jmath)[/tex]

ducks (relative to earth) = some speed v due South, or

[tex]\vec v_{D/E}=v(\cos270^\circ\,\vec\imath+\sin270^\circ\,\vec\jmath)[/tex]

Then by setting components equal, we have

[tex]\left(7.0\dfrac{\rm m}{\rm s}\right)\cos\theta+5.0\dfrac{\rm m}{\rm s}=0[/tex]

[tex]\left(7.0\dfrac{\rm m}{\rm s}\right)\sin\theta=-v[/tex]

We only care about the direction for this question, which we get from the first equation:

[tex]\left(7.0\dfrac{\rm m}{\rm s}\right)\cos\theta=-5.0\dfrac{\rm m}{\rm s}[/tex]

[tex]\cos\theta=-\dfrac57[/tex]

[tex]\theta=\cos^{-1}\left(-\dfrac57\right)\text{ OR }\theta=360^\circ-\cos^{-1}\left(-\dfrac57\right)[/tex]

or approximately 136º or 224º.

Only one of these directions must be correct. Choosing between them is a matter of picking the one that satisfies both equations. We want

[tex]\left(7.0\dfrac{\rm m}{\rm s}\right)\sin\theta=-v[/tex]

which means θ must be between 180º and 360º (since angles in this range have negative sine).

So the ducks must fly (relative to the air) in a direction 224º relative to the positive horizontal direction, or about 44º South of West.

I really need help with this question someone plz help !

Answers

Answer:D

Explanation:

Given

Same force is applied to each ball such that all have different masses

and Force is given by the product of mass and acceleration

[tex]F=m\times a[/tex]

[tex]a=\frac{F}{m}[/tex]

So acceleration of ball A

[tex]a_A=\frac{F}{0.5}=2F[/tex]

acceleration of ball B

[tex]a_B=\frac{F}{0.75}=\frac{4F}{3}=1.33F[/tex]

acceleration of ball C

[tex]a_C=\frac{F}{1}=F[/tex]

acceleration of ball D

[tex]a_D=\frac{F}{7.3}=\frac{F}{7.3}[/tex]

It is clear that acceleration of ball D is least.

Find the displacement of a simple harmonic wave of amplitude 6.44 m at t = 0.71 s. Assume that the wave number is 2.34 m-1, the angular frequency is 2.88 rad/s, and that the wave is propagating in the +x direction at x = 1.21 m.
A) 4.55 m.
B) 1.05 m.
C) 3.54 m.
D) 2.25 m.

Answers

Answer:

Letter A. [tex]y=4.55 m[/tex]

Explanation:

Let's use the wave equation:

[tex]y=Asin(kx-\omega t)[/tex]

A is the amplitude (A=6.44 m)t is the time (t=0.71 s)k is the wave number (k=2.34 1/m)ω is the angular frequency (ω=2.88 rad/s)x is the propagation of the x direction  (x=1.21 m)

Therefore the displacement y will be:

[tex]y=6.44*sin(2.34*1.21-2.88*0.71)[/tex]

[tex]y=4.55 m[/tex]

The answer is letter A.

I hope it helps you!

Answer:

Explanation:

Find the displacement of a simple harmonic wave of amplitude 6.44 m at t = 0.71 s. Assume that the wave number is 2.34 m-1, the angular frequency is 2.88 rad/s, and that the wave is propagating in the +x direction at x = 1.21 m.

Amplitude (A) of the simple harmonic wave = 6.44 m

wave number (k) of the given wave = 2.34 m-1

Angular frequency (ω) of the given wave = 2.88 rad/s

Displacement x = 1.21 m and time t = 0.71 s

Then the general equation for the displacement of the given simple harmonic wave at given x and time t is given by

y = Asin(kx - ωt)

= (6.44 m)sin[(2.34 m-1)(1.21 m) - (2.88 rad/s)(0.71 s)]

Y=6.44sin(0.7866 rad)

0.7866rad*(180 degrees/pi rad) =45.1

Y=6.44sin(45.1)

Y=4.55m

A conducting sphere contains positive charge distributed uniformly over its surface. Which statements about the potential due to this sphere are true? All potentials are measured relative to infinity

a. The potential at the center of the sphere is zero.
b.The potential is lowest, but not zero, at the center of the sphere.
c. The potential at the center of the sphere is the same as the potential at the surface.
d. The potential at the center is the same as the potential at infinity.
e. The potential at the surface is higher than the potential at the center.

Answers

Answer:

a. FALSE

b. FALSE

c. TRUTH

d. FALSE

e. FALSE

Explanation:

To determine which statements are truth or false you focus in the following formula, for the electric potential generated by a conducting sphere:

[tex]V=\frac{Q}{4\pi \epsilon_o R}[/tex]      inside the sphere

[tex]V'=\frac{Q}{4\pi \epsilon_o r}[/tex]      for r > R (outside the sphere)

R: radius of the sphere

ε0: dielectric permittivity of vacuum

Q: charge of the sphere

As you can notice, inside the sphere the potential is constant. Inside the sphere, the potential is the same. Outside the surface the potential decreases as 1/r, being r the distance to the center of the sphere.

Hence, you can conclude:

a. The potential at the center of the sphere is zero. FALSE

b.The potential is lowest, but not zero, at the center of the sphere. FALSE

c. The potential at the center of the sphere is the same as the potential at the surface. TRUTH

d. The potential at the center is the same as the potential at infinity. FALSE

e. The potential at the surface is higher than the potential at the center. FALSE

A small car and an SUV are at a stoplight. The car has a mass equal to half that of the SUV, and the SUV's engine can produce a maximum force equal to twice that of the car. When the light turns green, both drivers floor it at the same time. Which vehicle pulls ahead of the other vehicle after a few seconds?

Answers

Complete Question

A small car and an SUV are at a stoplight. The car has amass equal to half that of the SUV, and the SUV's engine can produce a maximum force equal to twice that of the car. When the light turns green, both drivers floor it at the same time. Which vehicle pulls ahead of the other vehicle after a few seconds?

a) It is a tie.

b) The SUV

c) The car

Answer:

The correct option is  a

Explanation:

From the question we are told that

     The mass of the car is [tex]m_c[/tex]

     The force of the car is  F

       The mass of the SUV is  [tex]m_s = 2 m_c[/tex]

       The force of the SUV is [tex]F_s = 2 F[/tex]

Generally force  of the car is mathematically represented as

        [tex]F= m_ca_c[/tex]

[tex]a_c[/tex] is acceleration of the car

Generally force  of the car is mathematically represented as

       [tex]F_s = m_s * a_s[/tex]

[tex]a_s[/tex] is acceleration of the SUV

=>   [tex]2 F = 2 m_c a_s[/tex]

       [tex]F = m_c a_s[/tex]

=>    [tex]m_c a_s = m_ca_c[/tex]

So  [tex]a_s = a_c[/tex]

  This means that the acceleration of both the car and the SUV are the same

Proposed Exercise - Mass Center of a Composite Body Determine the coordinates (x, y) of the center of mass of the body illustrated in the picture below

Answers

Answer:

x = 3.76 cm

y = 3.76 cm

Explanation:

This composite shape can be modeled as a square (7.2 cm × 7.2 cm) minus a quarter circle in the lower left corner (3.6 cm radius) and a right triangle in the upper right corner (3.6 cm × 3.6 cm).

The centroid of a square (or any rectangle) is at x = b/2 and y = h/2.

The centroid of a quarter circle is at x = y = 4r/(3π).

The centroid of a right triangle is at x = b/3 and y = h/3.

Build a table listing each shape, the coordinates of its centroid (x and y), and its area (A).  Use negative areas for the shapes that are being subtracted.

Next, multiply each coordinate by the area (Ax and Ay), sum the results (∑Ax and ∑Ay), then divide by the total area (∑Ax / ∑A and ∑Ay / ∑A).  The result will be the x and y coordinates of the center of mass.

See attached image.

A low C (f = 65Hz) is sounded on a piano. If the length of the piano wire is 2.0 m and its mass density is 5.0 g/m2, determine the tension of the wire.

Answers

Answer:

Tension of the wire(T) = 169 N

Explanation:

Given:

f = 65Hz

Length of the piano wire (L) = 2 m

Mass density = 5.0 g/m² = 0.005 kg/m²

Find:

Tension of the wire(T)

Computation:

f = v / λ

65 = v / 2L

65 = v /(2)(2)

v = 260 m/s

T = v² (m/l)

T = (260)²(0.005/2)

T = 169 N

Tension of the wire(T) = 169 N

A high diver of mass 60.0 kg steps off a board 10.0 m above the water and falls vertical to the water, starting from rest. If her downward motion is stopped 2.10 s after her feet first touch the water, what average upward force did the water exert on her

Answers

Answer:

The average upward force exerted by the water is 988.2 N

Explanation:

Given;

mass of the diver, m = 60 kg

height of the board above the water, h = 10 m

time when her feet touched the water, t = 2.10 s

The final velocity of the diver, when she is under the influence of acceleration of free  fall.

V² = U² + 2gh

where;

V is the final velocity

U is the initial velocity = 0

g is acceleration due gravity

h is the height of fall

V² = U² + 2gh

V² = 0 + 2 x 9.8 x 10

V² = 196

V = √196

V = 14 m/s

Acceleration of the diver during 2.10 s before her feet touched the water.

14 m/s is her initial velocity at this sage,

her final velocity at this stage is zero (0)

V = U + at

0 = 14 + 2.1(a)

2.1a = -14

a = -14 / 2.1

a = -6.67 m/s²

The average upward force exerted by the water;

[tex]F_{on\ diver} = mg - F_{ \ water}\\\\ma = mg - F_{ \ water}\\\\F_{ \ water} = mg - ma\\\\F_{ \ water} = m(g-a)\\\\F_{ \ water} = 60[9.8-(-6.67)]\\\\F_{ \ water} = 60 (9.8+6.67)\\\\F_{ \ water} = 60(16.47)\\\\F_{ \ water} = 988.2 \ N[/tex]

Therefore, the average upward force exerted by the water is 988.2 N

A hornet circles around a pop can at increasing speed while flying in a path with a 12-cm diameter. We can conclude that the hornet's wings must push on the air with force components that are Group of answer choices down and backwards. down, backwards, and outwards. down and inwards. down and outwards. straight down.

Answers

Answer:

down, backwards, and outwards.

Explanation:

For a hornet that is accelerating in flight, this means that there is a net forward motion at a relatively constant vertical height above the ground.

For this flight, the wings beat downwards to counter the weight of the hornet due to gravity, keeping it at that height above the floor.

For the hornet to accelerate forward, there has to be a net backwards force by the wing on the air. This backwards force accelerates tr forward due to the absence of an equal opposing force in the opposite direction save for a little drag.

The wings also beat with forces directed outwards to provide centripetal force to keep the hornet stable. The absence of this would cause it to spiral out of control.

Other Questions
Which expression is equivalent to log Subscript 8 Baseline 4 a (StartFraction b minus 4 Over c Superscript 4 Baseline EndFraction)? The body can get water from milk, juices, fruits, and vegetables.Please select the best answer from the choices provided. Which styles of guitar playing were part of early hip-hop music?a)blues and jazzb)flamenco and Cubanc)funk and rhythmd)pizzicato and arpeggio can there be shadows at night outside? Wind power is expected to provide Germany with _____ percent of its electricity needs. A. 10 B. 25 C. 40 D. 75 Please select the best answer from the choices provided A B C D Please answer this correctly Which of the following is the best inference about The Great Gatsby based on the setting described in this passage? What is inside the flower and can you describe it pls oh and dont mind squid -ward ??? Write an explicit formula an, the nth term of the sequence 23,25,27 is it actually rare to step on an ant? this sounds dumb but Im curious. A jet flies from New York to Los Angeles , a distance of 2,450 miles, and then flies back. The speed from NY to LA was 140 mph faster than the speed from LA to NYIf the total time in the air was 12 hours, what was the jet's speed from NY to LA? How does the greenhouse effect help regulate Earth's temperature compared to the Moon, even though they are similar distances from the sun? Wrong Meds, Again! It was horrible, said the distraught client. No matter how many times I provided the information, no one listened to me. And they obviously didnt listen to each other either, because they used the wrong meds . . . again. Okay, calm down. Now tell me what happened from the beginning, urged Melanie Torrent, the Quality Assurance Manager for Hope Memorial Hospital. I got a call at work saying my father was being taken to the hospital from the nursing home. The nursing home always sends a list of medications with the ambulance, but when I got to the emergency room, they were asking my dad what medications he was taking. Of course my dad told them he wasnt taking any medications and they believed him! Hes sent to the emergency room from a nursing home and they decide its reasonable for him not to be on any medications . . . so of course I corrected him and told them to find the medication list. I dont know whether the ambulance driver forgot to bring in the list, or gave it to the wrong person, or what, but they couldnt find it. My dad must be on 12 different medications so I wasnt sure I could remember them correctly. I called the nursing home and we went over the list with them, and then I gave the handwritten list to the nursing station. In the meantime, my dad was admitted to the hospital and moved to a hospital room. Again, a nurse came in with a computer and asked me to tell them what meds he was talking. I tried to tell them that the emergency room had the list, but she said it would be the next morning before the list got updated online. Nevertheless, the nurse called down to the emergency room and was faxed up the list of medications. Only the fax was unreadable, so they came back to me. It was a few hours before his next meds were due, so I drove over to the nursing home, had them make several legible copies of the meds list and drove back to the hospital. I gave the nurse the list, kept one for myself and posted the other on the bulletin board in my dads room. The nurse thanked me and said shed take care of it at the end of her shift. After a long night at the hospital, I woke up the next morning to see my dad hallucinating. I knew immediately what had happenedtheres a certain drug that he has this reaction to. I ran down to the nurses station and had her look up the medications he had been given. Sure enough, it was there, along with several other medications he should no longer be taking. Turns out, the list was from two years ago when he had last been admitted to the hospital! How could they have made that kind of mistakeusing data from two years ago? That is something well look into. More importantly, has your father been taken off the drug? Yes. And has the medication list been corrected? Yes. And how is he doing today? Fine today, but it could have been more serious and I think you should look into changing your procedures so this doesnt happen again . . . I appreciate you bringing this to my attention. I will speak to the persons involved and I assure you this will not happen again. Hope Memorial prides itself on being a caring and responsible health care provider. Now if youll excuse me, I have another client to see . . . 1. Trace the path of the medication list and denote possible failure points. Construct a process flowchart of the existing process and create a new chart of an improved process. 2. Was the medication error a failure of individuals or a failure of the process? Explain. 3. Think about the different settings, the ambulance, the emergency room, the hospital room, and the nurses station. How is data handled in each scenario? Can the process of recording information be changed so that every one is using the same data? How can the accuracy of the data be assured? 4. Given Melanies reaction, do you think this error will happen again? Why or why not? Compare the oral readings of the poem with your written reading. Write a summary paragraph that evaluates which interpretation of the poem you prefer. Use evaluation criteria and details from each reading to explain your reasoning.Excerpt from "The Love Song of J. Alfred Prufrock" by T.S. Eliot "And I have known the arms already, known them all Arms that are braceleted and white and bare (But in the lamplight, downed with light brown hair!) Is it perfume from a dress That makes me so digress? Arms that lies along a table, or wrap about a shawl. And should I then presume? And how should I begin? . . . Shall I say, I have gone at dusk through narrow streets And watched the smoke that rises from the pipes Of lonely men in shirt-sleeves, leaning out of windows? I should have been a pair or ragged claws Scuttling across the floors of silent seas." Find the value of x from this question At 25 oC, the rate constant for the first-order decomposition of a pesticide solution is 6.40 x 10-3 min-1. If the starting concentration of pesticide is 0.0314 M, what concentration will remain after 62.0 minutes at 25 oC? 3.12 x 10-2 M 47.4 M 2.11 x 10-2 M 4.67 x 10-2 M 8.72 M Find the length of the hypotenuse in each right triangle. Round to the nearest tenth, if necessary 12.1 ft14.7 ft245 ft15.7 ft What does the R in REHUGO stand for where the final battle for end of zemenemesafint e.adisalem I WILL GIVE YOU BRAINLIEST!!!!!